Average CNC Programmer Salary in Faroe Islands for 2026
In this article, we will look at the average CNC Programmer salary for 2026 in Faroe Islands and how that compares to other countries and professions. We'll also look at interesting salary data points like median salary, 25th and 75th percentile salaries, salary amounts based on experience, bonus ranges and more!
The data in this article has been compiled using official government salary data, salary surveys, and other sources such as job postings which contain salary information.
All salary information is in the local currency, which is the Danish krone. To keep things simple, we are using the DKK currency code instead of the currency symbol kr.
How Much Does an CNC Programmer Make in Faroe Islands?
An CNC Programmer working in Faroe Islands will typically earn around 209,500 DKK per year, and this can range from the lowest average salary of about 101,020 DKK to the highest average salary of 332,100 DKK.
These are average salaries for an CNC Programmer in Faroe Islands and include benefits such as housing and transport. It's also possible for an CNC Programmer to earn more or less than the average salaries shown above.
CNC Programmer salaries will vary a lot based on your experience, location, skills, and gender. Keep reading below to research more data on each of these areas.
Distribution of CNC Programmer Salaries in Faroe Islands
So we've looked at the average salaries an CNC Programmer will earn in Faroe Islands. The next interesting data point is the distribution of salaries.
Salary ranges
We already know that an CNC Programmer can earn between 101,020 DKK and 332,100 DKK on average in Faroe Islands. This is known as the range in statistics.
The difference between the maximum and minimum values is a good indicator of variability in salaries, and can be used by employers to figure out how much they can expect to pay, and for employees to know how much they can earn.
Median salary
The median salary for an CNC Programmer in Faroe Islands is 221,500 DKK. This is the middle value in the distribution of salaries.
What this means is that approximately 50% of the population earn less than 221,500 DKK, and 50% of the population earn more than 221,500 DKK.
If you are earning more than the median salary, that's a good indicator that you are being paid well.
If you're not earning more than the median salary, your objective should be to increase your earnings to be at least as high as the median salary (which you can do by asking for a pay rise, looking for a better paying job, etc).
Percentiles
Percentiles are similar to the median salary, but instead of looking at the middle value, they look at the values in the top and bottom half of the distribution.
For the average CNC Programmer salary in Faroe Islands, 25% of the population are earning less than 146,200 DKK while 75% of the population earn more than 146,200 DKK.
75% of the population earn less than 294,700 DKK, and 25% of the population earn more than 294,700 DKK.
Like the median salary, the 25th and 75th percentile salaries can be used to determine which quartile you fall into so that you know whether you are being paid well enough compared to others in your profession and location.
The difference between a median and an average salary
The median and average salary are both indicators you can use to see if you are being paid fairly based on the overall population.
- If your salary is higher than the average and the median salary, you are earning well compared to others.
- If your salary is lower than the average and the median salary, it could indicate you are not being paid well enough.
- If you are somewhere in between then it's tricky to determine if you are being paid well enough and you might need to research more closely.
CNC Programmer Salary by Experience Level in Faroe Islands
The most important factor in determining your salary after the specific profession is the number of years experience you have. It stands to reason that more years of experience will result in a higher wage.
We have researched the average CNC Programmer salary based on years of experience to give you an idea of how the average changes once you've worked for a certain amount of time.
- 0 - 2 Years Experience. An CNC Programmer in Faroe Islands that has less than two years of experience can expect to earn somewhere in the region of 115,260 DKK.
- 2 - 5 Years Experience. With two to five years of experience the average CNC Programmer salary would increase to 158,700 DKK.
- 5 - 10 Years Experience. From five to ten years of experience as an CNC Programmer, the average salary would be 225,700 DKK.
- 10 - 15 Years Experience. Once you have more than ten years of experience the average salary reaches around 275,200 DKK.
- 15 - 20 Years Experience. An CNC Programmer with 15 to 20 years of experience can earn an average of 290,800 DKK.
- 20+ Years Experience. For an CNC Programmer with more than 20 years, the expected average salary increases to 315,700 DKK.
Average Salary by Experience Chart
| 0-2 Years | - | 115,260 DKK |
| 2-5 Years | +38% | 158,700 DKK |
| 5-10 Years | +42% | 225,700 DKK |
| 10-15 Years | +22% | 275,200 DKK |
| 15-20 Years | +6% | 290,800 DKK |
| 20+ Years | +9% | 315,700 DKK |
CNC Programmer Salary by Education Level in Faroe Islands
As well as experience in a job, your education plays a big role in how much you can earn. A lot of higher paying positions require a high level of education, but how much can a degree increase your salary?
In our research we have compared the salaries of employees in the same job and career level with different levels of education to see how much more you can earn at each education level.
The salary you can earn based on your education is very specific to both your location and the career path you choose.
In our research, we looked at the average salary for an CNC Programmer in Faroe Islands based on the education level of the employees in order to find out whether a better education level would increase your salary.
- Certificate or Diploma. An CNC Programmer in Faroe Islands with a certificate or diploma education can earn an average salary of 142,300 DKK.
- Bachelor's Degree. An CNC Programmer in Faroe Islands with a bachelor's degree education can earn an average salary of 273,000 DKK.
Average Salary by Education Chart
| Certificate or Diploma | - | 142,300 DKK |
| Bachelor's Degree | +91% | 273,000 DKK |
How Much is a Master's Degree or MBA Program?
The approximate cost of a master's degree or post-graduate program like an MBA in Faroe Islands is around 134,000 to 401,000 DKK and takes two years to complete.
As you can see above, there are financial benefits from reaching master's degree level, but don't expect to see much of a salary increase until you have completed the degree.
It's common for people to pursue an MBA or other post-graduate program in order to switch to a a job that pays more. On average, you can expect to earn around 10% more when switching to a new company.
Whether you decide to pursue a master's degree depends on many factors. If you are able to afford it, the numbers suggest that the return on investment is worth it and you could recover the costs in a few years from the salary increase you would receive.
CNC Programmer Salary Compared by Gender
In the modern age, we know that there should never be a pay gap between men and women. Unfortunately, in many professions, there is still a significant difference between the salaries earned by men when compared to the salary of women in the same job.
In Faroe Islands, a male cnc programmer will earn an average of 225,300 DKK, while a female cnc programmer will earn around 197,600 DKK.
This means that a male cnc programmer earns approximately 14% more than a female cnc programmer for performing the same job.
Average Salary by Gender Chart in Faroe Islands
| Male | - | 225,300 DKK |
| Female | -14% | 197,600 DKK |
CNC Programmer Average Pay Raise in Faroe Islands
In many countries, an annual pay raise is often given to employees to reward their service with a salary increase.
From our research, we can see that the average pay raise for an CNC Programmer in Faroe Islands is around 5% every 30 months.
The national average pay raise across all professions and industries in Faroe Islands is around 4% every 29 months.
In this case, we can see that the number of months between the average pay raise is higher than the typical 12 months.
To make the data more meaningful, we can calculate what the approximate annual pay raise would be using a simple formula:
Annual Increase = ( Increase Rate ÷ Months ) × 12
So for this example, it would be:
Annual Increase = ( 5 ÷ 30 ) × 12 = 2%
What this means is that an CNC Programmer in Faroe Islands can expect to receive an average pay raise of around 2% every 12 months.
Annual Pay Raise by Industry in Faroe Islands for 2026
In the chart below, you can see the average annual pay raise percentages for each of the major industries in Faroe Islands.
You will see that companies in bigger and more lucrative industries tend to have the higher annual pay raises.
| Banking | - | 8% |
| Energy | - | 7% |
| Information Technology | - | 6% |
| Healthcare | - | 5% |
| Travel | - | 4% |
| Construction | - | 3% |
| Education | - | 2% |
CNC Programmer Bonus and Incentive Rates in Faroe Islands
Another part of your overall compensation in a job is how much bonus you receive. Some job roles will be more likely to pay a bonus than others and also more likely to have higher bonus rates.
Generally speaking, jobs that are more involved with direct revenue generation will receive higher bonuses based on the performance towards revenue goals.
An CNC Programmer is a low bonus based job, with 14% of employees reporting at least one bonus in the last 12 months.
86% reported that they had not received any bonuses in the previous 12 months.
For the employees that did receive a bonus in the previous 12 months, the reported bonuses ranged from 0% to 4%.
| Received Bonus | - | 14% |
| No Bonus | - | 86% |
What are the Types of Bonus?
There are a number of difference types of bonus you can receive in a job. Including:
- Individual performance bonus - This is a bonus that is awarded to an individual employee for general performance in the job. It's the most common type of bonus.
- Company performance bonus - This is a bonus that is awarded to a company employees to share profit with the staff.
- Goal based bonus - This is a bonus that is awarded to an individual employee (or a team) for achieving specific goals, objectives, or milestones.
- Holiday bonus - This type of bonus is usually paid around the holidays, often the end of the year, and is a token of appreciation for the hard work throughout the year.
Government vs Private Sector Salaries
Another commonly asked question is whether you get paid a higher salary working in the public (government) sector or the private sector.
Public sector employees in Faroe Islands earn approximately 19% more than private sector employees in the same role.
| Public Sector | - | 352,000 DKK |
| Private Sector | -19% | 297,000 DKK |
Salaries for Jobs Similar to an CNC Programmer
In the table below, we have salary information for jobs that are similar to an CNC Programmer in Faroe Islands.
| Job Title | Category | Salary |
|---|---|---|
| Assembly Foreman | Factory and Manufacturing | 83,140 DKK |
| Assembly Line Worker | Factory and Manufacturing | 80,760 DKK |
| Assembly Supervisor | Factory and Manufacturing | 136,100 DKK |
| Assistance Maintenance Manager | Factory and Manufacturing | 320,500 DKK |
| Assistant Shipping Manager | Factory and Manufacturing | 283,400 DKK |
| CNC Machinist | Factory and Manufacturing | 196,800 DKK |
| CNC Operator | Factory and Manufacturing | 181,600 DKK |
| Chemical Equipment Controller | Factory and Manufacturing | 209,700 DKK |
| Chemical Technican Apprentice | Factory and Manufacturing | 168,100 DKK |
| Colour Technologist | Factory and Manufacturing | 105,980 DKK |
| Contracts Manager | Factory and Manufacturing | 384,200 DKK |
| Data Collection Coordinator | Factory and Manufacturing | 139,100 DKK |
| Demand Planner | Factory and Manufacturing | 129,000 DKK |
| Derrick Operator | Factory and Manufacturing | 87,020 DKK |
| Director of Manufacturing | Factory and Manufacturing | 502,200 DKK |
| Dock Worker | Factory and Manufacturing | 80,920 DKK |
| Drying Technician | Factory and Manufacturing | 88,580 DKK |
| Equipment Operator | Factory and Manufacturing | 79,600 DKK |
| Export Sales Coordinator | Factory and Manufacturing | 263,100 DKK |
| Factory Superintendent | Factory and Manufacturing | 142,300 DKK |
| Factory Worker | Factory and Manufacturing | 90,900 DKK |
| Failure Analysis Technician | Factory and Manufacturing | 138,800 DKK |
| Fiberglass Laminator | Factory and Manufacturing | 94,400 DKK |
| Food Technologist | Factory and Manufacturing | 152,300 DKK |
| Forklift Driver | Factory and Manufacturing | 86,800 DKK |
| Forklift Operator | Factory and Manufacturing | 85,700 DKK |
| Forming Machine Operator | Factory and Manufacturing | 96,960 DKK |
| Furnace Operator | Factory and Manufacturing | 88,300 DKK |
| Gas Appliance Repairer | Factory and Manufacturing | 92,500 DKK |
| General Warehouse Associate | Factory and Manufacturing | 154,700 DKK |
| HSE Manager | Factory and Manufacturing | 361,600 DKK |
| Heavy Equipment Operator | Factory and Manufacturing | 115,520 DKK |
| Industrial Engineer | Factory and Manufacturing | 283,700 DKK |
| Industrial Machinery Mechanic | Factory and Manufacturing | 180,300 DKK |
| Industrial Production Manager | Factory and Manufacturing | 492,700 DKK |
| Industrial Safety and Health Engineer | Factory and Manufacturing | 290,800 DKK |
| Intake Operator | Factory and Manufacturing | 112,620 DKK |
| Key Account Manager | Factory and Manufacturing | 401,300 DKK |
| Lift Truck Operator | Factory and Manufacturing | 88,580 DKK |
| Loading Supervisor | Factory and Manufacturing | 152,100 DKK |
| Logistic Coordinator | Factory and Manufacturing | 217,900 DKK |
| Logistics Clerk | Factory and Manufacturing | 108,300 DKK |
| Machine Operator | Factory and Manufacturing | 89,800 DKK |
| Machinist | Factory and Manufacturing | 88,020 DKK |
| Maintenance Manager | Factory and Manufacturing | 351,900 DKK |
| Maintenance Store Clerk | Factory and Manufacturing | 98,000 DKK |
| Manufacturing Engineer | Factory and Manufacturing | 268,900 DKK |
| Manufacturing Engineering Manager | Factory and Manufacturing | 430,000 DKK |
| Manufacturing Engineering Technologist | Factory and Manufacturing | 309,800 DKK |
| Manufacturing Manager | Factory and Manufacturing | 501,400 DKK |
| Manufacturing Operative | Factory and Manufacturing | 142,300 DKK |
| Manufacturing Production Technician | Factory and Manufacturing | 119,500 DKK |
| Manufacturing Supervisor | Factory and Manufacturing | 246,200 DKK |
| Manufacturing Technician | Factory and Manufacturing | 101,860 DKK |
| Materials Manager | Factory and Manufacturing | 383,300 DKK |
| Materials Supervisor | Factory and Manufacturing | 253,400 DKK |
| Mechanical Fitter Engineer | Factory and Manufacturing | 281,500 DKK |
| Mechanical Foreman | Factory and Manufacturing | 81,960 DKK |
| Merchandise Planner | Factory and Manufacturing | 142,300 DKK |
| Metrology Engineer | Factory and Manufacturing | 273,300 DKK |
| Operations Engineer | Factory and Manufacturing | 254,800 DKK |
| Operations Manager | Factory and Manufacturing | 454,900 DKK |
| Order Management Coordinator | Factory and Manufacturing | 231,000 DKK |
| Order Processing Manager | Factory and Manufacturing | 371,100 DKK |
| Order Selector | Factory and Manufacturing | 111,000 DKK |
| Package Handler | Factory and Manufacturing | 83,420 DKK |
| Packaging Manager | Factory and Manufacturing | 275,800 DKK |
| Packer | Factory and Manufacturing | 86,460 DKK |
| Packing Deputy Supervisor | Factory and Manufacturing | 233,900 DKK |
| Planning Manager | Factory and Manufacturing | 404,600 DKK |
| Plant Manager | Factory and Manufacturing | 444,300 DKK |
| Precision Instrument Repairer | Factory and Manufacturing | 136,200 DKK |
| Process Technician | Factory and Manufacturing | 112,000 DKK |
| Product Manager | Factory and Manufacturing | 472,000 DKK |
| Production Analyst | Factory and Manufacturing | 394,500 DKK |
| Production Director | Factory and Manufacturing | 538,600 DKK |
| Production Engineer | Factory and Manufacturing | 282,300 DKK |
| Production Engineering Supervisor | Factory and Manufacturing | 403,100 DKK |
| Production Inspector | Factory and Manufacturing | 318,800 DKK |
| Production Laborer | Factory and Manufacturing | 80,060 DKK |
| Production Manager | Factory and Manufacturing | 528,600 DKK |
| Production Operator | Factory and Manufacturing | 123,400 DKK |
| Production Scheduler | Factory and Manufacturing | 225,700 DKK |
| Production Supervisor | Factory and Manufacturing | 294,700 DKK |
| Production Technician | Factory and Manufacturing | 125,100 DKK |
| Production Worker | Factory and Manufacturing | 112,000 DKK |
| Quality Control Analyst | Factory and Manufacturing | 363,000 DKK |
| Quality Control Inspector | Factory and Manufacturing | 308,900 DKK |
| Quality Control Manager | Factory and Manufacturing | 394,300 DKK |
| SHEQ Officer | Factory and Manufacturing | 137,400 DKK |
| Service Technician | Factory and Manufacturing | 115,080 DKK |
| Shipping Manager | Factory and Manufacturing | 433,400 DKK |
| Small Engine Mechanic | Factory and Manufacturing | 152,100 DKK |
| Spray Painter | Factory and Manufacturing | 90,660 DKK |
| Sterile Processing Technician | Factory and Manufacturing | 97,880 DKK |
| Structural Welder | Factory and Manufacturing | 80,580 DKK |
| Supply Chain Operative | Factory and Manufacturing | 240,500 DKK |
| Technical Operator | Factory and Manufacturing | 112,440 DKK |
| Technology Development Manager | Factory and Manufacturing | 467,100 DKK |
| Testing Technician | Factory and Manufacturing | 205,700 DKK |
| Toolmaker | Factory and Manufacturing | 136,100 DKK |
| Warehouse Forklift Operator | Factory and Manufacturing | 94,900 DKK |
| Warehouse Operative | Factory and Manufacturing | 89,960 DKK |
| Warehouse Worker | Factory and Manufacturing | 99,080 DKK |
| Warranty Handler | Factory and Manufacturing | 172,200 DKK |
| Welder | Factory and Manufacturing | 89,280 DKK |
| Workshop Manager | Factory and Manufacturing | 308,900 DKK |
Cite This Resource
Use the tool below to generate a reference for this page in common citation styles.
<a href="https://worldsalaries.com/average-cnc-programmer-salary-in-faroe-islands/">Average CNC Programmer Salary in Faroe Islands for 2026</a>
"Average CNC Programmer Salary in Faroe Islands for 2026." World Salaries. Accessed January 2, 2026. https://worldsalaries.com/average-cnc-programmer-salary-in-faroe-islands/.
"Average CNC Programmer Salary in Faroe Islands for 2026." World Salaries, https://worldsalaries.com/average-cnc-programmer-salary-in-faroe-islands/. Accessed 2 January, 2026.
Average CNC Programmer Salary in Faroe Islands for 2026. World Salaries. Retrieved from https://worldsalaries.com/average-cnc-programmer-salary-in-faroe-islands/.