Average Toolmaker Salary in Dominican Republic for 2026
In this article, we will look at the average Toolmaker salary for 2026 in Dominican Republic and how that compares to other countries and professions. We'll also look at interesting salary data points like median salary, 25th and 75th percentile salaries, salary amounts based on experience, bonus ranges and more!
The data in this article has been compiled using official government salary data, salary surveys, and other sources such as job postings which contain salary information.
All salary information is in the local currency, which is the Dominican peso. To keep things simple, we are using the DOP currency code instead of the currency symbol $.
How Much Does a Toolmaker Make in Dominican Republic?
A Toolmaker working in Dominican Republic will typically earn around 103,600 DOP per year, and this can range from the lowest average salary of about 53,840 DOP to the highest average salary of 157,600 DOP.
These are average salaries for a Toolmaker in Dominican Republic and include benefits such as housing and transport. It's also possible for a Toolmaker to earn more or less than the average salaries shown above.
Toolmaker salaries will vary a lot based on your experience, location, skills, and gender. Keep reading below to research more data on each of these areas.
Distribution of Toolmaker Salaries in Dominican Republic
So we've looked at the average salaries a Toolmaker will earn in Dominican Republic. The next interesting data point is the distribution of salaries.
Salary ranges
We already know that a Toolmaker can earn between 53,840 DOP and 157,600 DOP on average in Dominican Republic. This is known as the range in statistics.
The difference between the maximum and minimum values is a good indicator of variability in salaries, and can be used by employers to figure out how much they can expect to pay, and for employees to know how much they can earn.
Median salary
The median salary for a Toolmaker in Dominican Republic is 98,820 DOP. This is the middle value in the distribution of salaries.
What this means is that approximately 50% of the population earn less than 98,820 DOP, and 50% of the population earn more than 98,820 DOP.
If you are earning more than the median salary, that's a good indicator that you are being paid well.
If you're not earning more than the median salary, your objective should be to increase your earnings to be at least as high as the median salary (which you can do by asking for a pay rise, looking for a better paying job, etc).
Percentiles
Percentiles are similar to the median salary, but instead of looking at the middle value, they look at the values in the top and bottom half of the distribution.
For the average Toolmaker salary in Dominican Republic, 25% of the population are earning less than 66,120 DOP while 75% of the population earn more than 66,120 DOP.
75% of the population earn less than 123,400 DOP, and 25% of the population earn more than 123,400 DOP.
Like the median salary, the 25th and 75th percentile salaries can be used to determine which quartile you fall into so that you know whether you are being paid well enough compared to others in your profession and location.
The difference between a median and an average salary
The median and average salary are both indicators you can use to see if you are being paid fairly based on the overall population.
- If your salary is higher than the average and the median salary, you are earning well compared to others.
- If your salary is lower than the average and the median salary, it could indicate you are not being paid well enough.
- If you are somewhere in between then it's tricky to determine if you are being paid well enough and you might need to research more closely.
Toolmaker Salary by Experience Level in Dominican Republic
The most important factor in determining your salary after the specific profession is the number of years experience you have. It stands to reason that more years of experience will result in a higher wage.
We have researched the average Toolmaker salary based on years of experience to give you an idea of how the average changes once you've worked for a certain amount of time.
- 0 - 2 Years Experience. A Toolmaker in Dominican Republic that has less than two years of experience can expect to earn somewhere in the region of 58,440 DOP.
- 2 - 5 Years Experience. With two to five years of experience the average Toolmaker salary would increase to 82,480 DOP.
- 5 - 10 Years Experience. From five to ten years of experience as a Toolmaker, the average salary would be 105,800 DOP.
- 10 - 15 Years Experience. Once you have more than ten years of experience the average salary reaches around 125,700 DOP.
- 15 - 20 Years Experience. A Toolmaker with 15 to 20 years of experience can earn an average of 138,200 DOP.
- 20+ Years Experience. For a Toolmaker with more than 20 years, the expected average salary increases to 148,300 DOP.
Average Salary by Experience Chart
| 0-2 Years | - | 58,440 DOP |
| 2-5 Years | +34% | 82,480 DOP |
| 5-10 Years | +30% | 105,800 DOP |
| 10-15 Years | +21% | 125,700 DOP |
| 15-20 Years | +9% | 138,200 DOP |
| 20+ Years | +5% | 148,300 DOP |
Toolmaker Salary by Education Level in Dominican Republic
As well as experience in a job, your education plays a big role in how much you can earn. A lot of higher paying positions require a high level of education, but how much can a degree increase your salary?
In our research we have compared the salaries of employees in the same job and career level with different levels of education to see how much more you can earn at each education level.
The salary you can earn based on your education is very specific to both your location and the career path you choose.
In our research, we looked at the average salary for a Toolmaker in Dominican Republic based on the education level of the employees in order to find out whether a better education level would increase your salary.
- High School. A Toolmaker in Dominican Republic with a high school education can earn an average salary of 72,120 DOP.
- Certificate or Diploma. A Toolmaker in Dominican Republic with a certificate or diploma education can earn an average salary of 104,080 DOP.
- Bachelor's Degree. A Toolmaker in Dominican Republic with a bachelor's degree education can earn an average salary of 142,300 DOP.
Average Salary by Education Chart
| High School | - | 72,120 DOP |
| Certificate or Diploma | +43% | 104,080 DOP |
| Bachelor's Degree | +38% | 142,300 DOP |
How Much is a Master's Degree or MBA Program?
The approximate cost of a master's degree or post-graduate program like an MBA in Dominican Republic is around 99,300 to 298,000 DOP and takes two years to complete.
As you can see above, there are financial benefits from reaching master's degree level, but don't expect to see much of a salary increase until you have completed the degree.
It's common for people to pursue an MBA or other post-graduate program in order to switch to a a job that pays more. On average, you can expect to earn around 10% more when switching to a new company.
Whether you decide to pursue a master's degree depends on many factors. If you are able to afford it, the numbers suggest that the return on investment is worth it and you could recover the costs in a few years from the salary increase you would receive.
Toolmaker Salary Compared by Gender
In the modern age, we know that there should never be a pay gap between men and women. Unfortunately, in many professions, there is still a significant difference between the salaries earned by men when compared to the salary of women in the same job.
In Dominican Republic, a male toolmaker will earn an average of 106,600 DOP, while a female toolmaker will earn around 99,340 DOP.
This means that a male toolmaker earns approximately 7% more than a female toolmaker for performing the same job.
Average Salary by Gender Chart in Dominican Republic
| Male | - | 106,600 DOP |
| Female | -7% | 99,340 DOP |
Toolmaker Average Pay Raise in Dominican Republic
In many countries, an annual pay raise is often given to employees to reward their service with a salary increase.
From our research, we can see that the average pay raise for a Toolmaker in Dominican Republic is around 9% every 19 months.
The national average pay raise across all professions and industries in Dominican Republic is around 8% every 18 months.
In this case, we can see that the number of months between the average pay raise is higher than the typical 12 months.
To make the data more meaningful, we can calculate what the approximate annual pay raise would be using a simple formula:
Annual Increase = ( Increase Rate ÷ Months ) × 12
So for this example, it would be:
Annual Increase = ( 9 ÷ 19 ) × 12 = 6%
What this means is that a Toolmaker in Dominican Republic can expect to receive an average pay raise of around 6% every 12 months.
Annual Pay Raise by Industry in Dominican Republic for 2026
In the chart below, you can see the average annual pay raise percentages for each of the major industries in Dominican Republic.
You will see that companies in bigger and more lucrative industries tend to have the higher annual pay raises.
| Banking | - | 7% |
| Energy | - | 5% |
| Information Technology | - | 3% |
| Healthcare | - | 1% |
| Travel | - | 8% |
| Construction | - | 6% |
| Education | - | 4% |
Toolmaker Bonus and Incentive Rates in Dominican Republic
Another part of your overall compensation in a job is how much bonus you receive. Some job roles will be more likely to pay a bonus than others and also more likely to have higher bonus rates.
Generally speaking, jobs that are more involved with direct revenue generation will receive higher bonuses based on the performance towards revenue goals.
A Toolmaker is a low bonus based job, with 25% of employees reporting at least one bonus in the last 12 months.
75% reported that they had not received any bonuses in the previous 12 months.
For the employees that did receive a bonus in the previous 12 months, the reported bonuses ranged from 1% to 3%.
| Received Bonus | - | 25% |
| No Bonus | - | 75% |
What are the Types of Bonus?
There are a number of difference types of bonus you can receive in a job. Including:
- Individual performance bonus - This is a bonus that is awarded to an individual employee for general performance in the job. It's the most common type of bonus.
- Company performance bonus - This is a bonus that is awarded to a company employees to share profit with the staff.
- Goal based bonus - This is a bonus that is awarded to an individual employee (or a team) for achieving specific goals, objectives, or milestones.
- Holiday bonus - This type of bonus is usually paid around the holidays, often the end of the year, and is a token of appreciation for the hard work throughout the year.
Government vs Private Sector Salaries
Another commonly asked question is whether you get paid a higher salary working in the public (government) sector or the private sector.
Public sector employees in Dominican Republic earn approximately 7% more than private sector employees in the same role.
| Public Sector | - | 247,800 DOP |
| Private Sector | -7% | 232,400 DOP |
Salaries for Jobs Similar to a Toolmaker
In the table below, we have salary information for jobs that are similar to a Toolmaker in Dominican Republic.
| Job Title | Category | Salary |
|---|---|---|
| Assembly Foreman | Factory and Manufacturing | 61,580 DOP |
| Assembly Line Worker | Factory and Manufacturing | 61,680 DOP |
| Assembly Supervisor | Factory and Manufacturing | 102,460 DOP |
| Assistance Maintenance Manager | Factory and Manufacturing | 239,300 DOP |
| Assistant Shipping Manager | Factory and Manufacturing | 201,100 DOP |
| CNC Machinist | Factory and Manufacturing | 152,000 DOP |
| CNC Operator | Factory and Manufacturing | 138,800 DOP |
| CNC Programmer | Factory and Manufacturing | 157,600 DOP |
| Chemical Equipment Controller | Factory and Manufacturing | 152,300 DOP |
| Chemical Technican Apprentice | Factory and Manufacturing | 128,900 DOP |
| Colour Technologist | Factory and Manufacturing | 79,260 DOP |
| Contracts Manager | Factory and Manufacturing | 265,000 DOP |
| Data Collection Coordinator | Factory and Manufacturing | 109,340 DOP |
| Demand Planner | Factory and Manufacturing | 93,880 DOP |
| Derrick Operator | Factory and Manufacturing | 62,860 DOP |
| Director of Manufacturing | Factory and Manufacturing | 382,600 DOP |
| Dock Worker | Factory and Manufacturing | 58,800 DOP |
| Drying Technician | Factory and Manufacturing | 61,780 DOP |
| Equipment Operator | Factory and Manufacturing | 57,360 DOP |
| Export Sales Coordinator | Factory and Manufacturing | 192,600 DOP |
| Factory Superintendent | Factory and Manufacturing | 102,720 DOP |
| Factory Worker | Factory and Manufacturing | 67,020 DOP |
| Failure Analysis Technician | Factory and Manufacturing | 102,160 DOP |
| Fiberglass Laminator | Factory and Manufacturing | 69,240 DOP |
| Food Technologist | Factory and Manufacturing | 125,100 DOP |
| Forklift Driver | Factory and Manufacturing | 68,400 DOP |
| Forklift Operator | Factory and Manufacturing | 65,080 DOP |
| Forming Machine Operator | Factory and Manufacturing | 68,320 DOP |
| Furnace Operator | Factory and Manufacturing | 65,940 DOP |
| Gas Appliance Repairer | Factory and Manufacturing | 67,560 DOP |
| General Warehouse Associate | Factory and Manufacturing | 107,860 DOP |
| HSE Manager | Factory and Manufacturing | 271,300 DOP |
| Heavy Equipment Operator | Factory and Manufacturing | 84,800 DOP |
| Industrial Engineer | Factory and Manufacturing | 210,500 DOP |
| Industrial Machinery Mechanic | Factory and Manufacturing | 138,200 DOP |
| Industrial Production Manager | Factory and Manufacturing | 383,300 DOP |
| Industrial Safety and Health Engineer | Factory and Manufacturing | 200,000 DOP |
| Intake Operator | Factory and Manufacturing | 85,940 DOP |
| Key Account Manager | Factory and Manufacturing | 315,900 DOP |
| Lift Truck Operator | Factory and Manufacturing | 66,680 DOP |
| Loading Supervisor | Factory and Manufacturing | 115,220 DOP |
| Logistic Coordinator | Factory and Manufacturing | 172,200 DOP |
| Logistics Clerk | Factory and Manufacturing | 77,100 DOP |
| Machine Operator | Factory and Manufacturing | 66,140 DOP |
| Machinist | Factory and Manufacturing | 66,100 DOP |
| Maintenance Manager | Factory and Manufacturing | 252,300 DOP |
| Maintenance Store Clerk | Factory and Manufacturing | 69,540 DOP |
| Manufacturing Engineer | Factory and Manufacturing | 195,200 DOP |
| Manufacturing Engineering Manager | Factory and Manufacturing | 314,500 DOP |
| Manufacturing Engineering Technologist | Factory and Manufacturing | 239,000 DOP |
| Manufacturing Manager | Factory and Manufacturing | 366,200 DOP |
| Manufacturing Operative | Factory and Manufacturing | 106,960 DOP |
| Manufacturing Production Technician | Factory and Manufacturing | 82,920 DOP |
| Manufacturing Supervisor | Factory and Manufacturing | 187,500 DOP |
| Manufacturing Technician | Factory and Manufacturing | 73,880 DOP |
| Materials Manager | Factory and Manufacturing | 275,500 DOP |
| Materials Supervisor | Factory and Manufacturing | 181,600 DOP |
| Mechanical Fitter Engineer | Factory and Manufacturing | 207,800 DOP |
| Mechanical Foreman | Factory and Manufacturing | 68,060 DOP |
| Merchandise Planner | Factory and Manufacturing | 117,520 DOP |
| Metrology Engineer | Factory and Manufacturing | 204,000 DOP |
| Operations Engineer | Factory and Manufacturing | 201,100 DOP |
| Operations Manager | Factory and Manufacturing | 314,500 DOP |
| Order Management Coordinator | Factory and Manufacturing | 159,500 DOP |
| Order Processing Manager | Factory and Manufacturing | 286,400 DOP |
| Order Selector | Factory and Manufacturing | 80,640 DOP |
| Package Handler | Factory and Manufacturing | 66,480 DOP |
| Packaging Manager | Factory and Manufacturing | 222,300 DOP |
| Packer | Factory and Manufacturing | 66,260 DOP |
| Packing Deputy Supervisor | Factory and Manufacturing | 169,000 DOP |
| Planning Manager | Factory and Manufacturing | 308,900 DOP |
| Plant Manager | Factory and Manufacturing | 363,000 DOP |
| Precision Instrument Repairer | Factory and Manufacturing | 100,140 DOP |
| Process Technician | Factory and Manufacturing | 80,580 DOP |
| Product Manager | Factory and Manufacturing | 353,600 DOP |
| Production Analyst | Factory and Manufacturing | 299,500 DOP |
| Production Director | Factory and Manufacturing | 389,200 DOP |
| Production Engineer | Factory and Manufacturing | 221,500 DOP |
| Production Engineering Supervisor | Factory and Manufacturing | 315,700 DOP |
| Production Inspector | Factory and Manufacturing | 228,000 DOP |
| Production Laborer | Factory and Manufacturing | 57,800 DOP |
| Production Manager | Factory and Manufacturing | 369,900 DOP |
| Production Operator | Factory and Manufacturing | 89,460 DOP |
| Production Scheduler | Factory and Manufacturing | 161,600 DOP |
| Production Supervisor | Factory and Manufacturing | 212,500 DOP |
| Production Technician | Factory and Manufacturing | 88,600 DOP |
| Production Worker | Factory and Manufacturing | 83,020 DOP |
| Quality Control Analyst | Factory and Manufacturing | 277,400 DOP |
| Quality Control Inspector | Factory and Manufacturing | 231,000 DOP |
| Quality Control Manager | Factory and Manufacturing | 297,000 DOP |
| SHEQ Officer | Factory and Manufacturing | 98,440 DOP |
| Service Technician | Factory and Manufacturing | 86,460 DOP |
| Shipping Manager | Factory and Manufacturing | 327,300 DOP |
| Small Engine Mechanic | Factory and Manufacturing | 110,340 DOP |
| Spray Painter | Factory and Manufacturing | 66,440 DOP |
| Sterile Processing Technician | Factory and Manufacturing | 72,540 DOP |
| Structural Welder | Factory and Manufacturing | 58,860 DOP |
| Supply Chain Operative | Factory and Manufacturing | 183,700 DOP |
| Technical Operator | Factory and Manufacturing | 85,940 DOP |
| Technology Development Manager | Factory and Manufacturing | 381,800 DOP |
| Testing Technician | Factory and Manufacturing | 152,100 DOP |
| Warehouse Forklift Operator | Factory and Manufacturing | 70,940 DOP |
| Warehouse Operative | Factory and Manufacturing | 72,260 DOP |
| Warehouse Worker | Factory and Manufacturing | 69,180 DOP |
| Warranty Handler | Factory and Manufacturing | 119,500 DOP |
| Welder | Factory and Manufacturing | 64,640 DOP |
| Workshop Manager | Factory and Manufacturing | 245,300 DOP |
Salary Comparison by City
If you want to compare salaries with different cities in Dominican Republic, you can use the links below to explore the data for each specific city we have researched.
| City | Average Salary |
|---|---|
| Santo Domingo | 119,900 DOP |
Cite This Resource
Use the tool below to generate a reference for this page in common citation styles.
<a href="https://worldsalaries.com/average-toolmaker-salary-in-dominican-republic/">Average Toolmaker Salary in Dominican Republic for 2026</a>
"Average Toolmaker Salary in Dominican Republic for 2026." World Salaries. Accessed January 5, 2026. https://worldsalaries.com/average-toolmaker-salary-in-dominican-republic/.
"Average Toolmaker Salary in Dominican Republic for 2026." World Salaries, https://worldsalaries.com/average-toolmaker-salary-in-dominican-republic/. Accessed 5 January, 2026.
Average Toolmaker Salary in Dominican Republic for 2026. World Salaries. Retrieved from https://worldsalaries.com/average-toolmaker-salary-in-dominican-republic/.