Average Small Engine Mechanic Salary in Micronesia for 2026
In this article, we will look at the average Small Engine Mechanic salary for 2026 in Micronesia and how that compares to other countries and professions. We'll also look at interesting salary data points like median salary, 25th and 75th percentile salaries, salary amounts based on experience, bonus ranges and more!
The data in this article has been compiled using official government salary data, salary surveys, and other sources such as job postings which contain salary information.
All salary information is in the local currency, which is the United States dollar. To keep things simple, we are using the USD currency code instead of the currency symbol $.
How Much Does a Small Engine Mechanic Make in Micronesia?
A Small Engine Mechanic working in Micronesia will typically earn around 8,960 USD per year, and this can range from the lowest average salary of about 6,000 USD to the highest average salary of 13,700 USD.
These are average salaries for a Small Engine Mechanic in Micronesia and include benefits such as housing and transport. It's also possible for a Small Engine Mechanic to earn more or less than the average salaries shown above.
Small Engine Mechanic salaries will vary a lot based on your experience, location, skills, and gender. Keep reading below to research more data on each of these areas.
Distribution of Small Engine Mechanic Salaries in Micronesia
So we've looked at the average salaries a Small Engine Mechanic will earn in Micronesia. The next interesting data point is the distribution of salaries.
Salary ranges
We already know that a Small Engine Mechanic can earn between 6,000 USD and 13,700 USD on average in Micronesia. This is known as the range in statistics.
The difference between the maximum and minimum values is a good indicator of variability in salaries, and can be used by employers to figure out how much they can expect to pay, and for employees to know how much they can earn.
Median salary
The median salary for a Small Engine Mechanic in Micronesia is 6,440 USD. This is the middle value in the distribution of salaries.
What this means is that approximately 50% of the population earn less than 6,440 USD, and 50% of the population earn more than 6,440 USD.
If you are earning more than the median salary, that's a good indicator that you are being paid well.
If you're not earning more than the median salary, your objective should be to increase your earnings to be at least as high as the median salary (which you can do by asking for a pay rise, looking for a better paying job, etc).
Percentiles
Percentiles are similar to the median salary, but instead of looking at the middle value, they look at the values in the top and bottom half of the distribution.
For the average Small Engine Mechanic salary in Micronesia, 25% of the population are earning less than 5,720 USD while 75% of the population earn more than 5,720 USD.
75% of the population earn less than 9,980 USD, and 25% of the population earn more than 9,980 USD.
Like the median salary, the 25th and 75th percentile salaries can be used to determine which quartile you fall into so that you know whether you are being paid well enough compared to others in your profession and location.
The difference between a median and an average salary
The median and average salary are both indicators you can use to see if you are being paid fairly based on the overall population.
- If your salary is higher than the average and the median salary, you are earning well compared to others.
- If your salary is lower than the average and the median salary, it could indicate you are not being paid well enough.
- If you are somewhere in between then it's tricky to determine if you are being paid well enough and you might need to research more closely.
Small Engine Mechanic Salary by Experience Level in Micronesia
The most important factor in determining your salary after the specific profession is the number of years experience you have. It stands to reason that more years of experience will result in a higher wage.
We have researched the average Small Engine Mechanic salary based on years of experience to give you an idea of how the average changes once you've worked for a certain amount of time.
- 0 - 2 Years Experience. A Small Engine Mechanic in Micronesia that has less than two years of experience can expect to earn somewhere in the region of 5,780 USD.
- 2 - 5 Years Experience. With two to five years of experience the average Small Engine Mechanic salary would increase to 5,620 USD.
- 5 - 10 Years Experience. From five to ten years of experience as a Small Engine Mechanic, the average salary would be 9,020 USD.
- 10 - 15 Years Experience. Once you have more than ten years of experience the average salary reaches around 11,300 USD.
- 15 - 20 Years Experience. A Small Engine Mechanic with 15 to 20 years of experience can earn an average of 12,760 USD.
- 20+ Years Experience. For a Small Engine Mechanic with more than 20 years, the expected average salary increases to 12,200 USD.
Average Salary by Experience Chart
| 0-2 Years | - | 5,780 USD |
| 2-5 Years | +31% | 5,620 USD |
| 5-10 Years | +40% | 9,020 USD |
| 10-15 Years | +20% | 11,300 USD |
| 15-20 Years | +9% | 12,760 USD |
| 20+ Years | +8% | 12,200 USD |
Small Engine Mechanic Salary by Education Level in Micronesia
As well as experience in a job, your education plays a big role in how much you can earn. A lot of higher paying positions require a high level of education, but how much can a degree increase your salary?
In our research we have compared the salaries of employees in the same job and career level with different levels of education to see how much more you can earn at each education level.
The salary you can earn based on your education is very specific to both your location and the career path you choose.
In our research, we looked at the average salary for a Small Engine Mechanic in Micronesia based on the education level of the employees in order to find out whether a better education level would increase your salary.
- High School. A Small Engine Mechanic in Micronesia with a high school education can earn an average salary of 6,480 USD.
- Certificate or Diploma. A Small Engine Mechanic in Micronesia with a certificate or diploma education can earn an average salary of 7,300 USD.
- Bachelor's Degree. A Small Engine Mechanic in Micronesia with a bachelor's degree education can earn an average salary of 12,200 USD.
Average Salary by Education Chart
| High School | - | 6,480 USD |
| Certificate or Diploma | +47% | 7,300 USD |
| Bachelor's Degree | +54% | 12,200 USD |
How Much is a Master's Degree or MBA Program?
The approximate cost of a master's degree or post-graduate program like an MBA in Micronesia is around 7,020 to 21,100 USD and takes two years to complete.
As you can see above, there are financial benefits from reaching master's degree level, but don't expect to see much of a salary increase until you have completed the degree.
It's common for people to pursue an MBA or other post-graduate program in order to switch to a a job that pays more. On average, you can expect to earn around 10% more when switching to a new company.
Whether you decide to pursue a master's degree depends on many factors. If you are able to afford it, the numbers suggest that the return on investment is worth it and you could recover the costs in a few years from the salary increase you would receive.
Small Engine Mechanic Salary Compared by Gender
In the modern age, we know that there should never be a pay gap between men and women. Unfortunately, in many professions, there is still a significant difference between the salaries earned by men when compared to the salary of women in the same job.
In Micronesia, a male small engine mechanic will earn an average of 9,360 USD, while a female small engine mechanic will earn around 5,960 USD.
This means that a male small engine mechanic earns approximately 57% more than a female small engine mechanic for performing the same job.
Average Salary by Gender Chart in Micronesia
| Male | - | 9,360 USD |
| Female | -57% | 5,960 USD |
Small Engine Mechanic Average Pay Raise in Micronesia
In many countries, an annual pay raise is often given to employees to reward their service with a salary increase.
From our research, we can see that the average pay raise for a Small Engine Mechanic in Micronesia is around 6% every 29 months.
The national average pay raise across all professions and industries in Micronesia is around 5% every 28 months.
In this case, we can see that the number of months between the average pay raise is higher than the typical 12 months.
To make the data more meaningful, we can calculate what the approximate annual pay raise would be using a simple formula:
Annual Increase = ( Increase Rate ÷ Months ) × 12
So for this example, it would be:
Annual Increase = ( 6 ÷ 29 ) × 12 = 2%
What this means is that a Small Engine Mechanic in Micronesia can expect to receive an average pay raise of around 2% every 12 months.
Annual Pay Raise by Industry in Micronesia for 2026
In the chart below, you can see the average annual pay raise percentages for each of the major industries in Micronesia.
You will see that companies in bigger and more lucrative industries tend to have the higher annual pay raises.
| Banking | - | 5% |
| Energy | - | 1% |
| Information Technology | - | 6% |
| Healthcare | - | 2% |
| Travel | - | 7% |
| Construction | - | 3% |
| Education | - | 8% |
Small Engine Mechanic Bonus and Incentive Rates in Micronesia
Another part of your overall compensation in a job is how much bonus you receive. Some job roles will be more likely to pay a bonus than others and also more likely to have higher bonus rates.
Generally speaking, jobs that are more involved with direct revenue generation will receive higher bonuses based on the performance towards revenue goals.
A Small Engine Mechanic is a low bonus based job, with 10% of employees reporting at least one bonus in the last 12 months.
90% reported that they had not received any bonuses in the previous 12 months.
For the employees that did receive a bonus in the previous 12 months, the reported bonuses ranged from 1% to 3%.
| Received Bonus | - | 10% |
| No Bonus | - | 90% |
What are the Types of Bonus?
There are a number of difference types of bonus you can receive in a job. Including:
- Individual performance bonus - This is a bonus that is awarded to an individual employee for general performance in the job. It's the most common type of bonus.
- Company performance bonus - This is a bonus that is awarded to a company employees to share profit with the staff.
- Goal based bonus - This is a bonus that is awarded to an individual employee (or a team) for achieving specific goals, objectives, or milestones.
- Holiday bonus - This type of bonus is usually paid around the holidays, often the end of the year, and is a token of appreciation for the hard work throughout the year.
Government vs Private Sector Salaries
Another commonly asked question is whether you get paid a higher salary working in the public (government) sector or the private sector.
Public sector employees in Micronesia earn approximately 4% less than private sector employees in the same role.
| Public Sector | - | 15,700 USD |
| Private Sector | +4% | 16,400 USD |
Salaries for Jobs Similar to a Small Engine Mechanic
In the table below, we have salary information for jobs that are similar to a Small Engine Mechanic in Micronesia.
| Job Title | Category | Salary |
|---|---|---|
| Assembly Foreman | Factory and Manufacturing | 5,780 USD |
| Assembly Line Worker | Factory and Manufacturing | 4,860 USD |
| Assembly Supervisor | Factory and Manufacturing | 5,520 USD |
| Assistance Maintenance Manager | Factory and Manufacturing | 17,620 USD |
| Assistant Shipping Manager | Factory and Manufacturing | 14,200 USD |
| CNC Machinist | Factory and Manufacturing | 9,960 USD |
| CNC Operator | Factory and Manufacturing | 9,740 USD |
| CNC Programmer | Factory and Manufacturing | 10,080 USD |
| Chemical Equipment Controller | Factory and Manufacturing | 8,880 USD |
| Chemical Technican Apprentice | Factory and Manufacturing | 9,360 USD |
| Colour Technologist | Factory and Manufacturing | 6,180 USD |
| Contracts Manager | Factory and Manufacturing | 18,900 USD |
| Data Collection Coordinator | Factory and Manufacturing | 5,960 USD |
| Demand Planner | Factory and Manufacturing | 6,200 USD |
| Derrick Operator | Factory and Manufacturing | 4,320 USD |
| Director of Manufacturing | Factory and Manufacturing | 28,180 USD |
| Dock Worker | Factory and Manufacturing | 2,420 USD |
| Drying Technician | Factory and Manufacturing | 4,860 USD |
| Equipment Operator | Factory and Manufacturing | 2,420 USD |
| Export Sales Coordinator | Factory and Manufacturing | 12,620 USD |
| Factory Superintendent | Factory and Manufacturing | 7,040 USD |
| Factory Worker | Factory and Manufacturing | 4,940 USD |
| Failure Analysis Technician | Factory and Manufacturing | 5,960 USD |
| Fiberglass Laminator | Factory and Manufacturing | 5,780 USD |
| Food Technologist | Factory and Manufacturing | 10,100 USD |
| Forklift Driver | Factory and Manufacturing | 4,860 USD |
| Forklift Operator | Factory and Manufacturing | 5,780 USD |
| Forming Machine Operator | Factory and Manufacturing | 4,320 USD |
| Furnace Operator | Factory and Manufacturing | 4,860 USD |
| Gas Appliance Repairer | Factory and Manufacturing | 6,300 USD |
| General Warehouse Associate | Factory and Manufacturing | 8,420 USD |
| HSE Manager | Factory and Manufacturing | 18,900 USD |
| Heavy Equipment Operator | Factory and Manufacturing | 5,620 USD |
| Industrial Engineer | Factory and Manufacturing | 17,260 USD |
| Industrial Machinery Mechanic | Factory and Manufacturing | 10,380 USD |
| Industrial Production Manager | Factory and Manufacturing | 26,400 USD |
| Industrial Safety and Health Engineer | Factory and Manufacturing | 14,920 USD |
| Intake Operator | Factory and Manufacturing | 6,180 USD |
| Key Account Manager | Factory and Manufacturing | 23,520 USD |
| Lift Truck Operator | Factory and Manufacturing | 4,320 USD |
| Loading Supervisor | Factory and Manufacturing | 9,360 USD |
| Logistic Coordinator | Factory and Manufacturing | 11,040 USD |
| Logistics Clerk | Factory and Manufacturing | 6,180 USD |
| Machine Operator | Factory and Manufacturing | 5,780 USD |
| Machinist | Factory and Manufacturing | 6,300 USD |
| Maintenance Manager | Factory and Manufacturing | 16,980 USD |
| Maintenance Store Clerk | Factory and Manufacturing | 6,300 USD |
| Manufacturing Engineer | Factory and Manufacturing | 17,260 USD |
| Manufacturing Engineering Manager | Factory and Manufacturing | 23,380 USD |
| Manufacturing Engineering Technologist | Factory and Manufacturing | 16,720 USD |
| Manufacturing Manager | Factory and Manufacturing | 27,020 USD |
| Manufacturing Operative | Factory and Manufacturing | 6,280 USD |
| Manufacturing Production Technician | Factory and Manufacturing | 5,040 USD |
| Manufacturing Supervisor | Factory and Manufacturing | 14,620 USD |
| Manufacturing Technician | Factory and Manufacturing | 3,940 USD |
| Materials Manager | Factory and Manufacturing | 19,160 USD |
| Materials Supervisor | Factory and Manufacturing | 13,960 USD |
| Mechanical Fitter Engineer | Factory and Manufacturing | 15,760 USD |
| Mechanical Foreman | Factory and Manufacturing | 4,860 USD |
| Merchandise Planner | Factory and Manufacturing | 8,420 USD |
| Metrology Engineer | Factory and Manufacturing | 14,840 USD |
| Operations Engineer | Factory and Manufacturing | 11,880 USD |
| Operations Manager | Factory and Manufacturing | 23,660 USD |
| Order Management Coordinator | Factory and Manufacturing | 10,980 USD |
| Order Processing Manager | Factory and Manufacturing | 20,940 USD |
| Order Selector | Factory and Manufacturing | 5,400 USD |
| Package Handler | Factory and Manufacturing | 4,860 USD |
| Packaging Manager | Factory and Manufacturing | 14,540 USD |
| Packer | Factory and Manufacturing | 4,860 USD |
| Packing Deputy Supervisor | Factory and Manufacturing | 13,700 USD |
| Planning Manager | Factory and Manufacturing | 20,460 USD |
| Plant Manager | Factory and Manufacturing | 25,680 USD |
| Precision Instrument Repairer | Factory and Manufacturing | 6,200 USD |
| Process Technician | Factory and Manufacturing | 6,180 USD |
| Product Manager | Factory and Manufacturing | 22,340 USD |
| Production Analyst | Factory and Manufacturing | 20,520 USD |
| Production Director | Factory and Manufacturing | 30,800 USD |
| Production Engineer | Factory and Manufacturing | 14,660 USD |
| Production Engineering Supervisor | Factory and Manufacturing | 20,760 USD |
| Production Inspector | Factory and Manufacturing | 15,380 USD |
| Production Laborer | Factory and Manufacturing | 2,480 USD |
| Production Manager | Factory and Manufacturing | 27,480 USD |
| Production Operator | Factory and Manufacturing | 6,080 USD |
| Production Scheduler | Factory and Manufacturing | 10,080 USD |
| Production Supervisor | Factory and Manufacturing | 14,660 USD |
| Production Technician | Factory and Manufacturing | 5,200 USD |
| Production Worker | Factory and Manufacturing | 5,620 USD |
| Quality Control Analyst | Factory and Manufacturing | 18,900 USD |
| Quality Control Inspector | Factory and Manufacturing | 17,020 USD |
| Quality Control Manager | Factory and Manufacturing | 22,420 USD |
| SHEQ Officer | Factory and Manufacturing | 8,440 USD |
| Service Technician | Factory and Manufacturing | 6,180 USD |
| Shipping Manager | Factory and Manufacturing | 24,820 USD |
| Spray Painter | Factory and Manufacturing | 5,780 USD |
| Sterile Processing Technician | Factory and Manufacturing | 6,480 USD |
| Structural Welder | Factory and Manufacturing | 4,840 USD |
| Supply Chain Operative | Factory and Manufacturing | 14,540 USD |
| Technical Operator | Factory and Manufacturing | 5,040 USD |
| Technology Development Manager | Factory and Manufacturing | 26,660 USD |
| Testing Technician | Factory and Manufacturing | 12,300 USD |
| Toolmaker | Factory and Manufacturing | 6,280 USD |
| Warehouse Forklift Operator | Factory and Manufacturing | 4,940 USD |
| Warehouse Operative | Factory and Manufacturing | 6,480 USD |
| Warehouse Worker | Factory and Manufacturing | 4,320 USD |
| Warranty Handler | Factory and Manufacturing | 7,240 USD |
| Welder | Factory and Manufacturing | 5,780 USD |
| Workshop Manager | Factory and Manufacturing | 15,700 USD |
Cite This Resource
Use the tool below to generate a reference for this page in common citation styles.
<a href="https://worldsalaries.com/average-small-engine-mechanic-salary-in-micronesia/">Average Small Engine Mechanic Salary in Micronesia for 2026</a>
"Average Small Engine Mechanic Salary in Micronesia for 2026." World Salaries. Accessed January 1, 2026. https://worldsalaries.com/average-small-engine-mechanic-salary-in-micronesia/.
"Average Small Engine Mechanic Salary in Micronesia for 2026." World Salaries, https://worldsalaries.com/average-small-engine-mechanic-salary-in-micronesia/. Accessed 1 January, 2026.
Average Small Engine Mechanic Salary in Micronesia for 2026. World Salaries. Retrieved from https://worldsalaries.com/average-small-engine-mechanic-salary-in-micronesia/.