Average Metrology Engineer Salary in Guayaquil, Ecuador for 2026
In this article, we will look at the average Metrology Engineer salary for 2026 in Guayaquil and how that compares to other countries and professions. We'll also look at interesting salary data points like median salary, 25th and 75th percentile salaries, salary amounts based on experience, bonus ranges and more!
The data in this article has been compiled using official government salary data, salary surveys, and other sources such as job postings which contain salary information.
All salary information is in the local currency, which is the United States dollar. To keep things simple, we are using the USD currency code instead of the currency symbol $.
How Much Does a Metrology Engineer Make in Guayaquil?
A Metrology Engineer working in Guayaquil will typically earn around 14,820 USD per year, and this can range from the lowest average salary of about 6,200 USD to the highest average salary of 23,360 USD.
These are average salaries for a Metrology Engineer in Guayaquil and include benefits such as housing and transport. It's also possible for a Metrology Engineer to earn more or less than the average salaries shown above.
Metrology Engineer salaries will vary a lot based on your experience, location, skills, and gender. Keep reading below to research more data on each of these areas.
Distribution of Metrology Engineer Salaries in Guayaquil
So we've looked at the average salaries a Metrology Engineer will earn in Guayaquil. The next interesting data point is the distribution of salaries.
Salary ranges
We already know that a Metrology Engineer can earn between 6,200 USD and 23,360 USD on average in Guayaquil. This is known as the range in statistics.
The difference between the maximum and minimum values is a good indicator of variability in salaries, and can be used by employers to figure out how much they can expect to pay, and for employees to know how much they can earn.
Median salary
The median salary for a Metrology Engineer in Guayaquil is 16,340 USD. This is the middle value in the distribution of salaries.
What this means is that approximately 50% of the population earn less than 16,340 USD, and 50% of the population earn more than 16,340 USD.
If you are earning more than the median salary, that's a good indicator that you are being paid well.
If you're not earning more than the median salary, your objective should be to increase your earnings to be at least as high as the median salary (which you can do by asking for a pay rise, looking for a better paying job, etc).
Percentiles
Percentiles are similar to the median salary, but instead of looking at the middle value, they look at the values in the top and bottom half of the distribution.
For the average Metrology Engineer salary in Guayaquil, 25% of the population are earning less than 10,220 USD while 75% of the population earn more than 10,220 USD.
75% of the population earn less than 21,980 USD, and 25% of the population earn more than 21,980 USD.
Like the median salary, the 25th and 75th percentile salaries can be used to determine which quartile you fall into so that you know whether you are being paid well enough compared to others in your profession and location.
The difference between a median and an average salary
The median and average salary are both indicators you can use to see if you are being paid fairly based on the overall population.
- If your salary is higher than the average and the median salary, you are earning well compared to others.
- If your salary is lower than the average and the median salary, it could indicate you are not being paid well enough.
- If you are somewhere in between then it's tricky to determine if you are being paid well enough and you might need to research more closely.
Metrology Engineer Salary by Experience Level in Guayaquil
The most important factor in determining your salary after the specific profession is the number of years experience you have. It stands to reason that more years of experience will result in a higher wage.
We have researched the average Metrology Engineer salary based on years of experience to give you an idea of how the average changes once you've worked for a certain amount of time.
- 0 - 2 Years Experience. A Metrology Engineer in Guayaquil that has less than two years of experience can expect to earn somewhere in the region of 8,960 USD.
- 2 - 5 Years Experience. With two to five years of experience the average Metrology Engineer salary would increase to 10,220 USD.
- 5 - 10 Years Experience. From five to ten years of experience as a Metrology Engineer, the average salary would be 16,400 USD.
- 10 - 15 Years Experience. Once you have more than ten years of experience the average salary reaches around 20,500 USD.
- 15 - 20 Years Experience. A Metrology Engineer with 15 to 20 years of experience can earn an average of 20,000 USD.
- 20+ Years Experience. For a Metrology Engineer with more than 20 years, the expected average salary increases to 24,280 USD.
Average Salary by Experience Chart
| 0-2 Years | - | 8,960 USD |
| 2-5 Years | +34% | 10,220 USD |
| 5-10 Years | +48% | 16,400 USD |
| 10-15 Years | +22% | 20,500 USD |
| 15-20 Years | +9% | 20,000 USD |
| 20+ Years | +8% | 24,280 USD |
Metrology Engineer Salary by Education Level in Guayaquil
As well as experience in a job, your education plays a big role in how much you can earn. A lot of higher paying positions require a high level of education, but how much can a degree increase your salary?
In our research we have compared the salaries of employees in the same job and career level with different levels of education to see how much more you can earn at each education level.
The salary you can earn based on your education is very specific to both your location and the career path you choose.
In our research, we looked at the average salary for a Metrology Engineer in Guayaquil based on the education level of the employees in order to find out whether a better education level would increase your salary.
- Bachelor's Degree. A Metrology Engineer in Guayaquil with a bachelor's degree education can earn an average salary of 8,100 USD.
- Master's Degree. A Metrology Engineer in Guayaquil with a master's degree education can earn an average salary of 16,980 USD.
Average Salary by Education Chart
| Bachelor's Degree | - | 8,100 USD |
| Master's Degree | +93% | 16,980 USD |
How Much is a Master's Degree or MBA Program?
The approximate cost of a master's degree or post-graduate program like an MBA in Ecuador is around 6,810 to 20,400 USD and takes two years to complete.
As you can see above, there are financial benefits from reaching master's degree level, but don't expect to see much of a salary increase until you have completed the degree.
It's common for people to pursue an MBA or other post-graduate program in order to switch to a a job that pays more. On average, you can expect to earn around 10% more when switching to a new company.
Whether you decide to pursue a master's degree depends on many factors. If you are able to afford it, the numbers suggest that the return on investment is worth it and you could recover the costs in a few years from the salary increase you would receive.
Metrology Engineer Salary Compared by Gender
In the modern age, we know that there should never be a pay gap between men and women. Unfortunately, in many professions, there is still a significant difference between the salaries earned by men when compared to the salary of women in the same job.
In Guayaquil, a male metrology engineer will earn an average of 14,200 USD, while a female metrology engineer will earn around 13,900 USD.
This means that a male metrology engineer earns approximately 2% more than a female metrology engineer for performing the same job.
Average Salary by Gender Chart in Guayaquil
| Male | - | 14,200 USD |
| Female | -2% | 13,900 USD |
Metrology Engineer Average Pay Raise in Guayaquil
In many countries, an annual pay raise is often given to employees to reward their service with a salary increase.
From our research, we can see that the average pay raise for a Metrology Engineer in Guayaquil is around 9% every 21 months.
The national average pay raise across all professions and industries in Ecuador is around 7% every 19 months.
In this case, we can see that the number of months between the average pay raise is higher than the typical 12 months.
To make the data more meaningful, we can calculate what the approximate annual pay raise would be using a simple formula:
Annual Increase = ( Increase Rate ÷ Months ) × 12
So for this example, it would be:
Annual Increase = ( 9 ÷ 21 ) × 12 = 5%
What this means is that a Metrology Engineer in Guayaquil can expect to receive an average pay raise of around 5% every 12 months.
Annual Pay Raise by Industry in Guayaquil for 2026
In the chart below, you can see the average annual pay raise percentages for each of the major industries in Ecuador.
You will see that companies in bigger and more lucrative industries tend to have the higher annual pay raises.
| Banking | - | 9% |
| Energy | - | 9% |
| Information Technology | - | 9% |
| Healthcare | - | 9% |
| Travel | - | 9% |
| Construction | - | 9% |
| Education | - | 9% |
Metrology Engineer Bonus and Incentive Rates in Guayaquil
Another part of your overall compensation in a job is how much bonus you receive. Some job roles will be more likely to pay a bonus than others and also more likely to have higher bonus rates.
Generally speaking, jobs that are more involved with direct revenue generation will receive higher bonuses based on the performance towards revenue goals.
A Metrology Engineer is a moderate bonus based job, with 56% of employees reporting at least one bonus in the last 12 months.
44% reported that they had not received any bonuses in the previous 12 months.
For the employees that did receive a bonus in the previous 12 months, the reported bonuses ranged from 2% to 7%.
| Received Bonus | - | 56% |
| No Bonus | - | 44% |
What are the Types of Bonus?
There are a number of difference types of bonus you can receive in a job. Including:
- Individual performance bonus - This is a bonus that is awarded to an individual employee for general performance in the job. It's the most common type of bonus.
- Company performance bonus - This is a bonus that is awarded to a company employees to share profit with the staff.
- Goal based bonus - This is a bonus that is awarded to an individual employee (or a team) for achieving specific goals, objectives, or milestones.
- Holiday bonus - This type of bonus is usually paid around the holidays, often the end of the year, and is a token of appreciation for the hard work throughout the year.
Government vs Private Sector Salaries
Another commonly asked question is whether you get paid a higher salary working in the public (government) sector or the private sector.
Public sector employees in Ecuador earn approximately 9% less than private sector employees in the same role.
| Public Sector | - | 15,700 USD |
| Private Sector | +9% | 17,260 USD |
Salaries for Jobs Similar to a Metrology Engineer
In the table below, we have salary information for jobs that are similar to a Metrology Engineer in Guayaquil.
| Job Title | Category | Salary |
|---|---|---|
| Assembly Foreman | Factory and Manufacturing | 4,860 USD |
| Assembly Line Worker | Factory and Manufacturing | 2,420 USD |
| Assembly Supervisor | Factory and Manufacturing | 5,200 USD |
| Assistance Maintenance Manager | Factory and Manufacturing | 15,300 USD |
| Assistant Shipping Manager | Factory and Manufacturing | 12,620 USD |
| CNC Machinist | Factory and Manufacturing | 9,460 USD |
| CNC Operator | Factory and Manufacturing | 10,320 USD |
| CNC Programmer | Factory and Manufacturing | 12,020 USD |
| Chemical Equipment Controller | Factory and Manufacturing | 10,220 USD |
| Chemical Technican Apprentice | Factory and Manufacturing | 9,020 USD |
| Colour Technologist | Factory and Manufacturing | 6,480 USD |
| Contracts Manager | Factory and Manufacturing | 19,860 USD |
| Data Collection Coordinator | Factory and Manufacturing | 5,960 USD |
| Demand Planner | Factory and Manufacturing | 5,200 USD |
| Derrick Operator | Factory and Manufacturing | 5,780 USD |
| Director of Manufacturing | Factory and Manufacturing | 25,160 USD |
| Dock Worker | Factory and Manufacturing | 6,000 USD |
| Drying Technician | Factory and Manufacturing | 4,840 USD |
| Equipment Operator | Factory and Manufacturing | 2,480 USD |
| Export Sales Coordinator | Factory and Manufacturing | 12,240 USD |
| Factory Superintendent | Factory and Manufacturing | 6,200 USD |
| Factory Worker | Factory and Manufacturing | 4,320 USD |
| Failure Analysis Technician | Factory and Manufacturing | 6,760 USD |
| Fiberglass Laminator | Factory and Manufacturing | 4,860 USD |
| Food Technologist | Factory and Manufacturing | 9,020 USD |
| Forklift Driver | Factory and Manufacturing | 4,860 USD |
| Forklift Operator | Factory and Manufacturing | 5,780 USD |
| Forming Machine Operator | Factory and Manufacturing | 4,320 USD |
| Furnace Operator | Factory and Manufacturing | 5,780 USD |
| Gas Appliance Repairer | Factory and Manufacturing | 5,780 USD |
| General Warehouse Associate | Factory and Manufacturing | 7,300 USD |
| HSE Manager | Factory and Manufacturing | 17,740 USD |
| Heavy Equipment Operator | Factory and Manufacturing | 3,940 USD |
| Industrial Engineer | Factory and Manufacturing | 12,620 USD |
| Industrial Machinery Mechanic | Factory and Manufacturing | 9,440 USD |
| Industrial Production Manager | Factory and Manufacturing | 25,940 USD |
| Industrial Safety and Health Engineer | Factory and Manufacturing | 14,660 USD |
| Intake Operator | Factory and Manufacturing | 5,620 USD |
| Key Account Manager | Factory and Manufacturing | 20,460 USD |
| Lift Truck Operator | Factory and Manufacturing | 4,840 USD |
| Loading Supervisor | Factory and Manufacturing | 6,280 USD |
| Logistic Coordinator | Factory and Manufacturing | 13,660 USD |
| Logistics Clerk | Factory and Manufacturing | 5,160 USD |
| Machine Operator | Factory and Manufacturing | 4,840 USD |
| Machinist | Factory and Manufacturing | 4,860 USD |
| Maintenance Manager | Factory and Manufacturing | 18,780 USD |
| Maintenance Store Clerk | Factory and Manufacturing | 5,780 USD |
| Manufacturing Engineer | Factory and Manufacturing | 14,200 USD |
| Manufacturing Engineering Manager | Factory and Manufacturing | 20,460 USD |
| Manufacturing Engineering Technologist | Factory and Manufacturing | 15,380 USD |
| Manufacturing Manager | Factory and Manufacturing | 23,140 USD |
| Manufacturing Operative | Factory and Manufacturing | 5,960 USD |
| Manufacturing Production Technician | Factory and Manufacturing | 5,160 USD |
| Manufacturing Supervisor | Factory and Manufacturing | 11,040 USD |
| Manufacturing Technician | Factory and Manufacturing | 6,760 USD |
| Materials Manager | Factory and Manufacturing | 19,380 USD |
| Materials Supervisor | Factory and Manufacturing | 13,900 USD |
| Mechanical Fitter Engineer | Factory and Manufacturing | 17,260 USD |
| Mechanical Foreman | Factory and Manufacturing | 4,840 USD |
| Merchandise Planner | Factory and Manufacturing | 8,420 USD |
| Operations Engineer | Factory and Manufacturing | 13,560 USD |
| Operations Manager | Factory and Manufacturing | 23,400 USD |
| Order Management Coordinator | Factory and Manufacturing | 12,180 USD |
| Order Processing Manager | Factory and Manufacturing | 17,760 USD |
| Order Selector | Factory and Manufacturing | 3,940 USD |
| Package Handler | Factory and Manufacturing | 2,480 USD |
| Packaging Manager | Factory and Manufacturing | 13,100 USD |
| Packer | Factory and Manufacturing | 5,780 USD |
| Packing Deputy Supervisor | Factory and Manufacturing | 12,520 USD |
| Planning Manager | Factory and Manufacturing | 19,160 USD |
| Plant Manager | Factory and Manufacturing | 25,220 USD |
| Precision Instrument Repairer | Factory and Manufacturing | 6,760 USD |
| Process Technician | Factory and Manufacturing | 5,720 USD |
| Product Manager | Factory and Manufacturing | 24,280 USD |
| Production Analyst | Factory and Manufacturing | 18,280 USD |
| Production Director | Factory and Manufacturing | 28,660 USD |
| Production Engineer | Factory and Manufacturing | 15,880 USD |
| Production Engineering Supervisor | Factory and Manufacturing | 21,380 USD |
| Production Inspector | Factory and Manufacturing | 16,880 USD |
| Production Laborer | Factory and Manufacturing | 2,480 USD |
| Production Manager | Factory and Manufacturing | 29,040 USD |
| Production Operator | Factory and Manufacturing | 5,400 USD |
| Production Scheduler | Factory and Manufacturing | 12,300 USD |
| Production Supervisor | Factory and Manufacturing | 12,240 USD |
| Production Technician | Factory and Manufacturing | 6,080 USD |
| Production Worker | Factory and Manufacturing | 6,180 USD |
| Quality Control Analyst | Factory and Manufacturing | 20,300 USD |
| Quality Control Inspector | Factory and Manufacturing | 15,580 USD |
| Quality Control Manager | Factory and Manufacturing | 21,540 USD |
| SHEQ Officer | Factory and Manufacturing | 6,760 USD |
| Service Technician | Factory and Manufacturing | 5,720 USD |
| Shipping Manager | Factory and Manufacturing | 20,000 USD |
| Small Engine Mechanic | Factory and Manufacturing | 8,420 USD |
| Spray Painter | Factory and Manufacturing | 5,780 USD |
| Sterile Processing Technician | Factory and Manufacturing | 6,760 USD |
| Structural Welder | Factory and Manufacturing | 2,480 USD |
| Supply Chain Operative | Factory and Manufacturing | 13,540 USD |
| Technical Operator | Factory and Manufacturing | 5,160 USD |
| Technology Development Manager | Factory and Manufacturing | 25,220 USD |
| Testing Technician | Factory and Manufacturing | 11,300 USD |
| Toolmaker | Factory and Manufacturing | 7,040 USD |
| Warehouse Forklift Operator | Factory and Manufacturing | 5,780 USD |
| Warehouse Operative | Factory and Manufacturing | 5,780 USD |
| Warehouse Worker | Factory and Manufacturing | 4,940 USD |
| Warranty Handler | Factory and Manufacturing | 9,020 USD |
| Welder | Factory and Manufacturing | 2,420 USD |
| Workshop Manager | Factory and Manufacturing | 16,400 USD |
Salary Comparison by City
If you want to compare salaries with different cities in Ecuador, you can use the links below to explore the data for each specific city we have researched.
| City | Average Salary |
|---|---|
| Cuenca | 14,920 USD |
| Duran | 12,000 USD |
| Machala | 11,360 USD |
| Manta | 10,980 USD |
| Portoviejo | 10,980 USD |
| Quito | 14,200 USD |
| Santo Domingo | 14,620 USD |
Cite This Resource
Use the tool below to generate a reference for this page in common citation styles.
<a href="https://worldsalaries.com/average-metrology-engineer-salary-in-guayaquil/ecuador/">Average Metrology Engineer Salary in Guayaquil, Ecuador for 2026</a>
"Average Metrology Engineer Salary in Guayaquil, Ecuador for 2026." World Salaries. Accessed January 3, 2026. https://worldsalaries.com/average-metrology-engineer-salary-in-guayaquil/ecuador/.
"Average Metrology Engineer Salary in Guayaquil, Ecuador for 2026." World Salaries, https://worldsalaries.com/average-metrology-engineer-salary-in-guayaquil/ecuador/. Accessed 3 January, 2026.
Average Metrology Engineer Salary in Guayaquil, Ecuador for 2026. World Salaries. Retrieved from https://worldsalaries.com/average-metrology-engineer-salary-in-guayaquil/ecuador/.