Average Fitter and Turner Salary in Papua New Guinea for 2026
In this article, we will look at the average Fitter and Turner salary for 2026 in Papua New Guinea and how that compares to other countries and professions. We'll also look at interesting salary data points like median salary, 25th and 75th percentile salaries, salary amounts based on experience, bonus ranges and more!
The data in this article has been compiled using official government salary data, salary surveys, and other sources such as job postings which contain salary information.
All salary information is in the local currency, which is the Papua New Guinean kina. To keep things simple, we are using the PGK currency code instead of the currency symbol K.
How Much Does a Fitter and Turner Make in Papua New Guinea?
A Fitter and Turner working in Papua New Guinea will typically earn around 13,560 PGK per year, and this can range from the lowest average salary of about 6,080 PGK to the highest average salary of 20,760 PGK.
These are average salaries for a Fitter and Turner in Papua New Guinea and include benefits such as housing and transport. It's also possible for a Fitter and Turner to earn more or less than the average salaries shown above.
Fitter and Turner salaries will vary a lot based on your experience, location, skills, and gender. Keep reading below to research more data on each of these areas.
Distribution of Fitter and Turner Salaries in Papua New Guinea
So we've looked at the average salaries a Fitter and Turner will earn in Papua New Guinea. The next interesting data point is the distribution of salaries.
Salary ranges
We already know that a Fitter and Turner can earn between 6,080 PGK and 20,760 PGK on average in Papua New Guinea. This is known as the range in statistics.
The difference between the maximum and minimum values is a good indicator of variability in salaries, and can be used by employers to figure out how much they can expect to pay, and for employees to know how much they can earn.
Median salary
The median salary for a Fitter and Turner in Papua New Guinea is 17,260 PGK. This is the middle value in the distribution of salaries.
What this means is that approximately 50% of the population earn less than 17,260 PGK, and 50% of the population earn more than 17,260 PGK.
If you are earning more than the median salary, that's a good indicator that you are being paid well.
If you're not earning more than the median salary, your objective should be to increase your earnings to be at least as high as the median salary (which you can do by asking for a pay rise, looking for a better paying job, etc).
Percentiles
Percentiles are similar to the median salary, but instead of looking at the middle value, they look at the values in the top and bottom half of the distribution.
For the average Fitter and Turner salary in Papua New Guinea, 25% of the population are earning less than 9,140 PGK while 75% of the population earn more than 9,140 PGK.
75% of the population earn less than 21,020 PGK, and 25% of the population earn more than 21,020 PGK.
Like the median salary, the 25th and 75th percentile salaries can be used to determine which quartile you fall into so that you know whether you are being paid well enough compared to others in your profession and location.
The difference between a median and an average salary
The median and average salary are both indicators you can use to see if you are being paid fairly based on the overall population.
- If your salary is higher than the average and the median salary, you are earning well compared to others.
- If your salary is lower than the average and the median salary, it could indicate you are not being paid well enough.
- If you are somewhere in between then it's tricky to determine if you are being paid well enough and you might need to research more closely.
Fitter and Turner Salary by Experience Level in Papua New Guinea
The most important factor in determining your salary after the specific profession is the number of years experience you have. It stands to reason that more years of experience will result in a higher wage.
We have researched the average Fitter and Turner salary based on years of experience to give you an idea of how the average changes once you've worked for a certain amount of time.
- 0 - 2 Years Experience. A Fitter and Turner in Papua New Guinea that has less than two years of experience can expect to earn somewhere in the region of 7,040 PGK.
- 2 - 5 Years Experience. With two to five years of experience the average Fitter and Turner salary would increase to 9,460 PGK.
- 5 - 10 Years Experience. From five to ten years of experience as a Fitter and Turner, the average salary would be 14,840 PGK.
- 10 - 15 Years Experience. Once you have more than ten years of experience the average salary reaches around 18,780 PGK.
- 15 - 20 Years Experience. A Fitter and Turner with 15 to 20 years of experience can earn an average of 18,940 PGK.
- 20+ Years Experience. For a Fitter and Turner with more than 20 years, the expected average salary increases to 21,400 PGK.
Average Salary by Experience Chart
| 0-2 Years | - | 7,040 PGK |
| 2-5 Years | +33% | 9,460 PGK |
| 5-10 Years | +48% | 14,840 PGK |
| 10-15 Years | +22% | 18,780 PGK |
| 15-20 Years | +9% | 18,940 PGK |
| 20+ Years | +8% | 21,400 PGK |
Fitter and Turner Salary by Education Level in Papua New Guinea
As well as experience in a job, your education plays a big role in how much you can earn. A lot of higher paying positions require a high level of education, but how much can a degree increase your salary?
In our research we have compared the salaries of employees in the same job and career level with different levels of education to see how much more you can earn at each education level.
The salary you can earn based on your education is very specific to both your location and the career path you choose.
In our research, we looked at the average salary for a Fitter and Turner in Papua New Guinea based on the education level of the employees in order to find out whether a better education level would increase your salary.
- High School. A Fitter and Turner in Papua New Guinea with a high school education can earn an average salary of 10,100 PGK.
- Certificate or Diploma. A Fitter and Turner in Papua New Guinea with a certificate or diploma education can earn an average salary of 14,620 PGK.
- Bachelor's Degree. A Fitter and Turner in Papua New Guinea with a bachelor's degree education can earn an average salary of 23,400 PGK.
Average Salary by Education Chart
| High School | - | 10,100 PGK |
| Certificate or Diploma | +57% | 14,620 PGK |
| Bachelor's Degree | +68% | 23,400 PGK |
How Much is a Master's Degree or MBA Program?
The approximate cost of a master's degree or post-graduate program like an MBA in Papua New Guinea is around 20,500 to 61,600 PGK and takes two years to complete.
As you can see above, there are financial benefits from reaching master's degree level, but don't expect to see much of a salary increase until you have completed the degree.
It's common for people to pursue an MBA or other post-graduate program in order to switch to a a job that pays more. On average, you can expect to earn around 10% more when switching to a new company.
Whether you decide to pursue a master's degree depends on many factors. If you are able to afford it, the numbers suggest that the return on investment is worth it and you could recover the costs in a few years from the salary increase you would receive.
Fitter and Turner Salary Compared by Gender
In the modern age, we know that there should never be a pay gap between men and women. Unfortunately, in many professions, there is still a significant difference between the salaries earned by men when compared to the salary of women in the same job.
In Papua New Guinea, a male fitter and turner will earn an average of 17,260 PGK, while a female fitter and turner will earn around 13,780 PGK.
This means that a male fitter and turner earns approximately 25% more than a female fitter and turner for performing the same job.
Average Salary by Gender Chart in Papua New Guinea
| Male | - | 17,260 PGK |
| Female | -25% | 13,780 PGK |
Fitter and Turner Average Pay Raise in Papua New Guinea
In many countries, an annual pay raise is often given to employees to reward their service with a salary increase.
From our research, we can see that the average pay raise for a Fitter and Turner in Papua New Guinea is around 7% every 27 months.
The national average pay raise across all professions and industries in Papua New Guinea is around 5% every 28 months.
In this case, we can see that the number of months between the average pay raise is higher than the typical 12 months.
To make the data more meaningful, we can calculate what the approximate annual pay raise would be using a simple formula:
Annual Increase = ( Increase Rate ÷ Months ) × 12
So for this example, it would be:
Annual Increase = ( 7 ÷ 27 ) × 12 = 3%
What this means is that a Fitter and Turner in Papua New Guinea can expect to receive an average pay raise of around 3% every 12 months.
Annual Pay Raise by Industry in Papua New Guinea for 2026
In the chart below, you can see the average annual pay raise percentages for each of the major industries in Papua New Guinea.
You will see that companies in bigger and more lucrative industries tend to have the higher annual pay raises.
| Banking | - | 6% |
| Energy | - | 3% |
| Information Technology | - | 9% |
| Healthcare | - | 6% |
| Travel | - | 3% |
| Construction | - | 9% |
| Education | - | 6% |
Fitter and Turner Bonus and Incentive Rates in Papua New Guinea
Another part of your overall compensation in a job is how much bonus you receive. Some job roles will be more likely to pay a bonus than others and also more likely to have higher bonus rates.
Generally speaking, jobs that are more involved with direct revenue generation will receive higher bonuses based on the performance towards revenue goals.
A Fitter and Turner is a low bonus based job, with 15% of employees reporting at least one bonus in the last 12 months.
85% reported that they had not received any bonuses in the previous 12 months.
For the employees that did receive a bonus in the previous 12 months, the reported bonuses ranged from 0% to 4%.
| Received Bonus | - | 15% |
| No Bonus | - | 85% |
What are the Types of Bonus?
There are a number of difference types of bonus you can receive in a job. Including:
- Individual performance bonus - This is a bonus that is awarded to an individual employee for general performance in the job. It's the most common type of bonus.
- Company performance bonus - This is a bonus that is awarded to a company employees to share profit with the staff.
- Goal based bonus - This is a bonus that is awarded to an individual employee (or a team) for achieving specific goals, objectives, or milestones.
- Holiday bonus - This type of bonus is usually paid around the holidays, often the end of the year, and is a token of appreciation for the hard work throughout the year.
Government vs Private Sector Salaries
Another commonly asked question is whether you get paid a higher salary working in the public (government) sector or the private sector.
Public sector employees in Papua New Guinea earn approximately 21% more than private sector employees in the same role.
| Public Sector | - | 53,120 PGK |
| Private Sector | -21% | 43,760 PGK |
Salaries for Jobs Similar to a Fitter and Turner
In the table below, we have salary information for jobs that are similar to a Fitter and Turner in Papua New Guinea.
| Job Title | Category | Salary |
|---|---|---|
| Acoustics Engineer | Engineering | 40,420 PGK |
| Assembly Engineering Technician | Engineering | 29,600 PGK |
| Assistant Chief Engineer | Engineering | 49,700 PGK |
| Associate Engineer | Engineering | 39,080 PGK |
| AutoCAD Drafter | Engineering | 27,020 PGK |
| Autocad Operator | Engineering | 25,940 PGK |
| Automation Engineer | Engineering | 46,840 PGK |
| Automation Engineer | Engineering | 47,540 PGK |
| Avionic System Support Engineer | Engineering | 43,480 PGK |
| BMS Engineer | Engineering | 38,620 PGK |
| Biochemical Engineer | Engineering | 36,020 PGK |
| Bridge and Lock Tender | Engineering | 23,500 PGK |
| Broadcast Engineer | Engineering | 45,060 PGK |
| CAD Design Engineer | Engineering | 46,840 PGK |
| CAD Designer | Engineering | 25,440 PGK |
| CAE Engineer | Engineering | 41,660 PGK |
| Ceramics Engineer | Engineering | 36,720 PGK |
| Chemical Engineer | Engineering | 42,320 PGK |
| Civil Drafter | Engineering | 24,200 PGK |
| Civil Engineer | Engineering | 42,320 PGK |
| Civil Site Engineer | Engineering | 44,720 PGK |
| Civil Technician | Engineering | 25,940 PGK |
| Commissioning Engineer | Engineering | 39,420 PGK |
| Communications Engineer | Engineering | 47,760 PGK |
| Condition Monitoring Engineer | Engineering | 39,160 PGK |
| Contract Associate Engineer | Engineering | 40,140 PGK |
| Contract Engineer | Engineering | 42,400 PGK |
| Control Systems Engineer | Engineering | 40,600 PGK |
| Controls Engineer | Engineering | 41,700 PGK |
| Controls Software Engineer | Engineering | 38,180 PGK |
| Corrosion Engineer | Engineering | 36,580 PGK |
| Design Engineer | Engineering | 44,540 PGK |
| Director of Engineering | Engineering | 89,460 PGK |
| Drafter | Engineering | 26,780 PGK |
| Drafting Manager | Engineering | 47,580 PGK |
| Drilling Engineer | Engineering | 42,460 PGK |
| Drilling Foreman | Engineering | 12,120 PGK |
| Electrical Draughtsman | Engineering | 21,400 PGK |
| Electrical Engineer | Engineering | 46,400 PGK |
| Electrical Engineering Manager | Engineering | 63,500 PGK |
| Electromechanical Engineering Technologist | Engineering | 48,140 PGK |
| Electromechanical Equipment Assembler | Engineering | 22,420 PGK |
| Energy Engineer | Engineering | 41,480 PGK |
| Engine Assembler | Engineering | 20,120 PGK |
| Engineer | Engineering | 46,280 PGK |
| Engineering Account Manager | Engineering | 47,580 PGK |
| Engineering Chief Designer | Engineering | 49,360 PGK |
| Engineering Consultant | Engineering | 60,480 PGK |
| Engineering Key Account Manager | Engineering | 64,560 PGK |
| Engineering Lab Technician | Engineering | 38,620 PGK |
| Engineering Manager | Engineering | 60,340 PGK |
| Engineering Planning Manager | Engineering | 58,440 PGK |
| Engineering Production Manager | Engineering | 73,020 PGK |
| Engineering Project Analyst | Engineering | 49,300 PGK |
| Engineering Project Coordinator | Engineering | 45,600 PGK |
| Engineering Project Director | Engineering | 87,060 PGK |
| Engineering Project Leader | Engineering | 57,900 PGK |
| Engineering Project Manager | Engineering | 59,000 PGK |
| Engineering Research and Development Manager | Engineering | 67,900 PGK |
| Engineering Safety Coordinator | Engineering | 35,500 PGK |
| Engineering Sales Manager | Engineering | 56,140 PGK |
| Engineering Technician | Engineering | 34,080 PGK |
| Engineering Technologist | Engineering | 33,440 PGK |
| Environmental Engineer | Engineering | 39,420 PGK |
| Equipment Engineer | Engineering | 41,700 PGK |
| Equipment Engineering Manager | Engineering | 55,580 PGK |
| Estimator | Engineering | 35,340 PGK |
| Fabrication Specialist | Engineering | 27,560 PGK |
| Fabricator | Engineering | 19,160 PGK |
| Facade Engineer | Engineering | 42,320 PGK |
| Fiber Analyst | Engineering | 22,400 PGK |
| Field Engineer | Engineering | 43,260 PGK |
| Field Engineering Manager | Engineering | 75,260 PGK |
| Fire Engineer | Engineering | 42,320 PGK |
| Forestry Strategic Planner | Engineering | 48,160 PGK |
| Generation Engineer | Engineering | 42,040 PGK |
| Genetic Engineer | Engineering | 46,980 PGK |
| Geological Engineer | Engineering | 45,200 PGK |
| Geotechnical Engineer | Engineering | 43,800 PGK |
| HSE Professional | Engineering | 36,720 PGK |
| HVAC Engineer | Engineering | 45,580 PGK |
| HVAC Supervisor | Engineering | 36,580 PGK |
| Heavy Equipment Mechanic | Engineering | 22,340 PGK |
| Highway Engineer | Engineering | 42,400 PGK |
| Industrial Engineer | Engineering | 42,400 PGK |
| Industrial Engineering Technologist | Engineering | 42,040 PGK |
| Instrument Engineer | Engineering | 39,560 PGK |
| Instrument Technician | Engineering | 22,420 PGK |
| Instrumentation Designer | Engineering | 36,800 PGK |
| Instrumentation Engineer | Engineering | 42,460 PGK |
| Instrumentation Manager | Engineering | 42,320 PGK |
| Instrumentation and Control Engineer | Engineering | 39,560 PGK |
| Irrigation Engineer | Engineering | 42,040 PGK |
| Licensed Aircraft Engineer | Engineering | 47,580 PGK |
| Locomotive Engineer | Engineering | 42,400 PGK |
| Maintenance Engineer | Engineering | 41,560 PGK |
| Maintenance Fitter | Engineering | 14,840 PGK |
| Maintenance Manager | Engineering | 43,360 PGK |
| Manufacturing Engineer | Engineering | 40,640 PGK |
| Marine Engineer | Engineering | 42,320 PGK |
| Materials Engineer | Engineering | 38,620 PGK |
| Materials Researcher | Engineering | 38,680 PGK |
| Materials Technician | Engineering | 30,700 PGK |
| Mechanical Design Engineer | Engineering | 46,980 PGK |
| Mechanical Designer | Engineering | 36,800 PGK |
| Mechanical Engineer | Engineering | 45,000 PGK |
| Mechanical Engineering Manager | Engineering | 58,520 PGK |
| Mechanical Inspector | Engineering | 44,180 PGK |
| Mechanical and Electrical Engineer | Engineering | 45,600 PGK |
| Mechatronics Engineer | Engineering | 44,780 PGK |
| Mining Engineer | Engineering | 39,420 PGK |
| Oil and Petrochemical Engineer | Engineering | 45,720 PGK |
| Optical Engineer | Engineering | 39,420 PGK |
| Optical Instrument Assembler | Engineering | 20,760 PGK |
| PCB Assembler | Engineering | 17,260 PGK |
| Photonics Engineer | Engineering | 46,840 PGK |
| Photonics Technician | Engineering | 37,880 PGK |
| Pipeline Engineer | Engineering | 39,640 PGK |
| Piping Designer | Engineering | 25,220 PGK |
| Piping Engineer | Engineering | 37,880 PGK |
| Planning Engineer | Engineering | 44,540 PGK |
| Pressure Vessel Inspector | Engineering | 18,900 PGK |
| Principal Cost Engineer | Engineering | 44,140 PGK |
| Principal Engineer | Engineering | 40,040 PGK |
| Principal Support Engineer | Engineering | 43,520 PGK |
| Process Engineer | Engineering | 40,640 PGK |
| Process Operator | Engineering | 25,940 PGK |
| Product Development Engineer | Engineering | 44,180 PGK |
| Product Development Technician | Engineering | 29,600 PGK |
| Product Engineer | Engineering | 44,780 PGK |
| Product Safety Engineer | Engineering | 41,700 PGK |
| Production Engineer | Engineering | 43,520 PGK |
| Project Engineer | Engineering | 42,960 PGK |
| Proposal Manager | Engineering | 53,660 PGK |
| Purchasing Engineer | Engineering | 39,640 PGK |
| Quality Assurance Engineer | Engineering | 41,660 PGK |
| Rail Engineer | Engineering | 45,560 PGK |
| Regional Field Engineer | Engineering | 46,980 PGK |
| Robotics Engineer | Engineering | 48,940 PGK |
| Robotics Technician | Engineering | 33,980 PGK |
| Safety Engineer | Engineering | 43,360 PGK |
| Safety Inspector | Engineering | 34,080 PGK |
| Safety Manager | Engineering | 50,660 PGK |
| Safety Officer | Engineering | 21,640 PGK |
| Sales Engineer | Engineering | 46,160 PGK |
| Scheduling Engineer | Engineering | 39,640 PGK |
| Service Engineer | Engineering | 46,280 PGK |
| Solar Engineer | Engineering | 45,200 PGK |
| Staff Engineer | Engineering | 41,900 PGK |
| Static Equipment Engineer | Engineering | 42,460 PGK |
| Stationary Engineer | Engineering | 38,680 PGK |
| Stress Engineer | Engineering | 42,040 PGK |
| Structural Analysis Engineer | Engineering | 42,400 PGK |
| Structural Designer | Engineering | 38,680 PGK |
| Structural Engineer | Engineering | 39,560 PGK |
| Structural Technician | Engineering | 26,280 PGK |
| Supply Chain Specialist | Engineering | 43,260 PGK |
| Surveyor | Engineering | 34,240 PGK |
| Technical Affairs Officer | Engineering | 22,540 PGK |
| Technical Assistant | Engineering | 20,760 PGK |
| Technical Engineer | Engineering | 36,020 PGK |
| Technical Support Engineer | Engineering | 39,160 PGK |
| Tender Engineer | Engineering | 36,700 PGK |
| Test Development Engineer | Engineering | 38,340 PGK |
| Test Engineer | Engineering | 43,080 PGK |
| Transportation Engineer | Engineering | 39,800 PGK |
| Validation Engineer | Engineering | 38,680 PGK |
| Verification Engineer | Engineering | 43,480 PGK |
| Wastewater Engineer | Engineering | 43,360 PGK |
| Wind Energy Engineer | Engineering | 43,220 PGK |
| Wind Energy Operations Manager | Engineering | 55,220 PGK |
| Work Planner | Engineering | 31,080 PGK |
Cite This Resource
Use the tool below to generate a reference for this page in common citation styles.
<a href="https://worldsalaries.com/average-fitter-and-turner-salary-in-papua-new-guinea/">Average Fitter and Turner Salary in Papua New Guinea for 2026</a>
"Average Fitter and Turner Salary in Papua New Guinea for 2026." World Salaries. Accessed January 31, 2026. https://worldsalaries.com/average-fitter-and-turner-salary-in-papua-new-guinea/.
"Average Fitter and Turner Salary in Papua New Guinea for 2026." World Salaries, https://worldsalaries.com/average-fitter-and-turner-salary-in-papua-new-guinea/. Accessed 31 January, 2026.
Average Fitter and Turner Salary in Papua New Guinea for 2026. World Salaries. Retrieved from https://worldsalaries.com/average-fitter-and-turner-salary-in-papua-new-guinea/.