Average CNC Programmer Salary in Izmir, Turkey for 2026
In this article, we will look at the average CNC Programmer salary for 2026 in Izmir and how that compares to other countries and professions. We'll also look at interesting salary data points like median salary, 25th and 75th percentile salaries, salary amounts based on experience, bonus ranges and more!
The data in this article has been compiled using official government salary data, salary surveys, and other sources such as job postings which contain salary information.
All salary information is in the local currency, which is the Turkish lira. To keep things simple, we are using the TRY currency code instead of the currency symbol ₺.
How Much Does an CNC Programmer Make in Izmir?
An CNC Programmer working in Izmir will typically earn around 67,560 TRY per year, and this can range from the lowest average salary of about 29,640 TRY to the highest average salary of 104,620 TRY.
These are average salaries for an CNC Programmer in Izmir and include benefits such as housing and transport. It's also possible for an CNC Programmer to earn more or less than the average salaries shown above.
CNC Programmer salaries will vary a lot based on your experience, location, skills, and gender. Keep reading below to research more data on each of these areas.
Distribution of CNC Programmer Salaries in Izmir
So we've looked at the average salaries an CNC Programmer will earn in Izmir. The next interesting data point is the distribution of salaries.
Salary ranges
We already know that an CNC Programmer can earn between 29,640 TRY and 104,620 TRY on average in Izmir. This is known as the range in statistics.
The difference between the maximum and minimum values is a good indicator of variability in salaries, and can be used by employers to figure out how much they can expect to pay, and for employees to know how much they can earn.
Median salary
The median salary for an CNC Programmer in Izmir is 69,240 TRY. This is the middle value in the distribution of salaries.
What this means is that approximately 50% of the population earn less than 69,240 TRY, and 50% of the population earn more than 69,240 TRY.
If you are earning more than the median salary, that's a good indicator that you are being paid well.
If you're not earning more than the median salary, your objective should be to increase your earnings to be at least as high as the median salary (which you can do by asking for a pay rise, looking for a better paying job, etc).
Percentiles
Percentiles are similar to the median salary, but instead of looking at the middle value, they look at the values in the top and bottom half of the distribution.
For the average CNC Programmer salary in Izmir, 25% of the population are earning less than 43,800 TRY while 75% of the population earn more than 43,800 TRY.
75% of the population earn less than 93,600 TRY, and 25% of the population earn more than 93,600 TRY.
Like the median salary, the 25th and 75th percentile salaries can be used to determine which quartile you fall into so that you know whether you are being paid well enough compared to others in your profession and location.
The difference between a median and an average salary
The median and average salary are both indicators you can use to see if you are being paid fairly based on the overall population.
- If your salary is higher than the average and the median salary, you are earning well compared to others.
- If your salary is lower than the average and the median salary, it could indicate you are not being paid well enough.
- If you are somewhere in between then it's tricky to determine if you are being paid well enough and you might need to research more closely.
CNC Programmer Salary by Experience Level in Izmir
The most important factor in determining your salary after the specific profession is the number of years experience you have. It stands to reason that more years of experience will result in a higher wage.
We have researched the average CNC Programmer salary based on years of experience to give you an idea of how the average changes once you've worked for a certain amount of time.
- 0 - 2 Years Experience. An CNC Programmer in Izmir that has less than two years of experience can expect to earn somewhere in the region of 33,520 TRY.
- 2 - 5 Years Experience. With two to five years of experience the average CNC Programmer salary would increase to 47,540 TRY.
- 5 - 10 Years Experience. From five to ten years of experience as an CNC Programmer, the average salary would be 67,300 TRY.
- 10 - 15 Years Experience. Once you have more than ten years of experience the average salary reaches around 81,960 TRY.
- 15 - 20 Years Experience. An CNC Programmer with 15 to 20 years of experience can earn an average of 90,900 TRY.
- 20+ Years Experience. For an CNC Programmer with more than 20 years, the expected average salary increases to 98,440 TRY.
Average Salary by Experience Chart
| 0-2 Years | - | 33,520 TRY |
| 2-5 Years | +34% | 47,540 TRY |
| 5-10 Years | +48% | 67,300 TRY |
| 10-15 Years | +22% | 81,960 TRY |
| 15-20 Years | +9% | 90,900 TRY |
| 20+ Years | +8% | 98,440 TRY |
CNC Programmer Salary by Education Level in Izmir
As well as experience in a job, your education plays a big role in how much you can earn. A lot of higher paying positions require a high level of education, but how much can a degree increase your salary?
In our research we have compared the salaries of employees in the same job and career level with different levels of education to see how much more you can earn at each education level.
The salary you can earn based on your education is very specific to both your location and the career path you choose.
In our research, we looked at the average salary for an CNC Programmer in Izmir based on the education level of the employees in order to find out whether a better education level would increase your salary.
- Certificate or Diploma. An CNC Programmer in Izmir with a certificate or diploma education can earn an average salary of 39,560 TRY.
- Bachelor's Degree. An CNC Programmer in Izmir with a bachelor's degree education can earn an average salary of 78,940 TRY.
Average Salary by Education Chart
| Certificate or Diploma | - | 39,560 TRY |
| Bachelor's Degree | +93% | 78,940 TRY |
How Much is a Master's Degree or MBA Program?
The approximate cost of a master's degree or post-graduate program like an MBA in Turkey is around 39,200 to 117,000 TRY and takes two years to complete.
As you can see above, there are financial benefits from reaching master's degree level, but don't expect to see much of a salary increase until you have completed the degree.
It's common for people to pursue an MBA or other post-graduate program in order to switch to a a job that pays more. On average, you can expect to earn around 10% more when switching to a new company.
Whether you decide to pursue a master's degree depends on many factors. If you are able to afford it, the numbers suggest that the return on investment is worth it and you could recover the costs in a few years from the salary increase you would receive.
CNC Programmer Salary Compared by Gender
In the modern age, we know that there should never be a pay gap between men and women. Unfortunately, in many professions, there is still a significant difference between the salaries earned by men when compared to the salary of women in the same job.
In Izmir, a male cnc programmer will earn an average of 64,040 TRY, while a female cnc programmer will earn around 57,820 TRY.
This means that a male cnc programmer earns approximately 11% more than a female cnc programmer for performing the same job.
Average Salary by Gender Chart in Izmir
| Male | - | 64,040 TRY |
| Female | -11% | 57,820 TRY |
CNC Programmer Average Pay Raise in Izmir
In many countries, an annual pay raise is often given to employees to reward their service with a salary increase.
From our research, we can see that the average pay raise for an CNC Programmer in Izmir is around 9% every 19 months.
The national average pay raise across all professions and industries in Turkey is around 8% every 18 months.
In this case, we can see that the number of months between the average pay raise is higher than the typical 12 months.
To make the data more meaningful, we can calculate what the approximate annual pay raise would be using a simple formula:
Annual Increase = ( Increase Rate ÷ Months ) × 12
So for this example, it would be:
Annual Increase = ( 9 ÷ 19 ) × 12 = 6%
What this means is that an CNC Programmer in Izmir can expect to receive an average pay raise of around 6% every 12 months.
Annual Pay Raise by Industry in Izmir for 2026
In the chart below, you can see the average annual pay raise percentages for each of the major industries in Turkey.
You will see that companies in bigger and more lucrative industries tend to have the higher annual pay raises.
| Banking | - | 5% |
| Energy | - | 1% |
| Information Technology | - | 6% |
| Healthcare | - | 2% |
| Travel | - | 7% |
| Construction | - | 3% |
| Education | - | 8% |
CNC Programmer Bonus and Incentive Rates in Izmir
Another part of your overall compensation in a job is how much bonus you receive. Some job roles will be more likely to pay a bonus than others and also more likely to have higher bonus rates.
Generally speaking, jobs that are more involved with direct revenue generation will receive higher bonuses based on the performance towards revenue goals.
An CNC Programmer is a low bonus based job, with 29% of employees reporting at least one bonus in the last 12 months.
71% reported that they had not received any bonuses in the previous 12 months.
For the employees that did receive a bonus in the previous 12 months, the reported bonuses ranged from 0% to 3%.
| Received Bonus | - | 29% |
| No Bonus | - | 71% |
What are the Types of Bonus?
There are a number of difference types of bonus you can receive in a job. Including:
- Individual performance bonus - This is a bonus that is awarded to an individual employee for general performance in the job. It's the most common type of bonus.
- Company performance bonus - This is a bonus that is awarded to a company employees to share profit with the staff.
- Goal based bonus - This is a bonus that is awarded to an individual employee (or a team) for achieving specific goals, objectives, or milestones.
- Holiday bonus - This type of bonus is usually paid around the holidays, often the end of the year, and is a token of appreciation for the hard work throughout the year.
Government vs Private Sector Salaries
Another commonly asked question is whether you get paid a higher salary working in the public (government) sector or the private sector.
Public sector employees in Turkey earn approximately 6% more than private sector employees in the same role.
| Public Sector | - | 95,420 TRY |
| Private Sector | -6% | 89,960 TRY |
Salaries for Jobs Similar to an CNC Programmer
In the table below, we have salary information for jobs that are similar to an CNC Programmer in Izmir.
| Job Title | Category | Salary |
|---|---|---|
| Assembly Foreman | Factory and Manufacturing | 26,780 TRY |
| Assembly Line Worker | Factory and Manufacturing | 25,680 TRY |
| Assembly Supervisor | Factory and Manufacturing | 42,320 TRY |
| Assistance Maintenance Manager | Factory and Manufacturing | 97,880 TRY |
| Assistant Shipping Manager | Factory and Manufacturing | 81,960 TRY |
| CNC Machinist | Factory and Manufacturing | 58,440 TRY |
| CNC Operator | Factory and Manufacturing | 58,860 TRY |
| Chemical Equipment Controller | Factory and Manufacturing | 62,060 TRY |
| Chemical Technican Apprentice | Factory and Manufacturing | 54,180 TRY |
| Colour Technologist | Factory and Manufacturing | 32,420 TRY |
| Contracts Manager | Factory and Manufacturing | 119,320 TRY |
| Data Collection Coordinator | Factory and Manufacturing | 42,960 TRY |
| Demand Planner | Factory and Manufacturing | 38,620 TRY |
| Derrick Operator | Factory and Manufacturing | 26,100 TRY |
| Director of Manufacturing | Factory and Manufacturing | 154,700 TRY |
| Dock Worker | Factory and Manufacturing | 23,260 TRY |
| Drying Technician | Factory and Manufacturing | 28,820 TRY |
| Equipment Operator | Factory and Manufacturing | 23,700 TRY |
| Export Sales Coordinator | Factory and Manufacturing | 84,180 TRY |
| Factory Superintendent | Factory and Manufacturing | 45,060 TRY |
| Factory Worker | Factory and Manufacturing | 27,560 TRY |
| Failure Analysis Technician | Factory and Manufacturing | 41,480 TRY |
| Fiberglass Laminator | Factory and Manufacturing | 28,660 TRY |
| Food Technologist | Factory and Manufacturing | 48,760 TRY |
| Forklift Driver | Factory and Manufacturing | 28,720 TRY |
| Forklift Operator | Factory and Manufacturing | 25,660 TRY |
| Forming Machine Operator | Factory and Manufacturing | 26,280 TRY |
| Furnace Operator | Factory and Manufacturing | 25,160 TRY |
| Gas Appliance Repairer | Factory and Manufacturing | 26,860 TRY |
| General Warehouse Associate | Factory and Manufacturing | 45,600 TRY |
| HSE Manager | Factory and Manufacturing | 111,240 TRY |
| Heavy Equipment Operator | Factory and Manufacturing | 35,500 TRY |
| Industrial Engineer | Factory and Manufacturing | 82,720 TRY |
| Industrial Machinery Mechanic | Factory and Manufacturing | 56,880 TRY |
| Industrial Production Manager | Factory and Manufacturing | 159,400 TRY |
| Industrial Safety and Health Engineer | Factory and Manufacturing | 87,640 TRY |
| Intake Operator | Factory and Manufacturing | 34,960 TRY |
| Key Account Manager | Factory and Manufacturing | 128,900 TRY |
| Lift Truck Operator | Factory and Manufacturing | 26,280 TRY |
| Loading Supervisor | Factory and Manufacturing | 50,580 TRY |
| Logistic Coordinator | Factory and Manufacturing | 65,920 TRY |
| Logistics Clerk | Factory and Manufacturing | 35,500 TRY |
| Machine Operator | Factory and Manufacturing | 24,200 TRY |
| Machinist | Factory and Manufacturing | 26,660 TRY |
| Maintenance Manager | Factory and Manufacturing | 109,740 TRY |
| Maintenance Store Clerk | Factory and Manufacturing | 27,480 TRY |
| Manufacturing Engineer | Factory and Manufacturing | 81,960 TRY |
| Manufacturing Engineering Manager | Factory and Manufacturing | 127,700 TRY |
| Manufacturing Engineering Technologist | Factory and Manufacturing | 96,220 TRY |
| Manufacturing Manager | Factory and Manufacturing | 148,300 TRY |
| Manufacturing Operative | Factory and Manufacturing | 45,580 TRY |
| Manufacturing Production Technician | Factory and Manufacturing | 35,340 TRY |
| Manufacturing Supervisor | Factory and Manufacturing | 71,660 TRY |
| Manufacturing Technician | Factory and Manufacturing | 31,340 TRY |
| Materials Manager | Factory and Manufacturing | 125,100 TRY |
| Materials Supervisor | Factory and Manufacturing | 78,500 TRY |
| Mechanical Fitter Engineer | Factory and Manufacturing | 84,580 TRY |
| Mechanical Foreman | Factory and Manufacturing | 25,660 TRY |
| Merchandise Planner | Factory and Manufacturing | 46,980 TRY |
| Metrology Engineer | Factory and Manufacturing | 77,860 TRY |
| Operations Engineer | Factory and Manufacturing | 83,400 TRY |
| Operations Manager | Factory and Manufacturing | 134,600 TRY |
| Order Management Coordinator | Factory and Manufacturing | 67,360 TRY |
| Order Processing Manager | Factory and Manufacturing | 110,340 TRY |
| Order Selector | Factory and Manufacturing | 34,960 TRY |
| Package Handler | Factory and Manufacturing | 24,860 TRY |
| Packaging Manager | Factory and Manufacturing | 91,320 TRY |
| Packer | Factory and Manufacturing | 28,180 TRY |
| Packing Deputy Supervisor | Factory and Manufacturing | 72,380 TRY |
| Planning Manager | Factory and Manufacturing | 118,200 TRY |
| Plant Manager | Factory and Manufacturing | 142,300 TRY |
| Precision Instrument Repairer | Factory and Manufacturing | 38,340 TRY |
| Process Technician | Factory and Manufacturing | 33,980 TRY |
| Product Manager | Factory and Manufacturing | 146,200 TRY |
| Production Analyst | Factory and Manufacturing | 123,400 TRY |
| Production Director | Factory and Manufacturing | 168,100 TRY |
| Production Engineer | Factory and Manufacturing | 89,980 TRY |
| Production Engineering Supervisor | Factory and Manufacturing | 125,100 TRY |
| Production Inspector | Factory and Manufacturing | 95,980 TRY |
| Production Laborer | Factory and Manufacturing | 22,340 TRY |
| Production Manager | Factory and Manufacturing | 154,700 TRY |
| Production Operator | Factory and Manufacturing | 35,340 TRY |
| Production Scheduler | Factory and Manufacturing | 67,560 TRY |
| Production Supervisor | Factory and Manufacturing | 83,900 TRY |
| Production Technician | Factory and Manufacturing | 36,020 TRY |
| Production Worker | Factory and Manufacturing | 33,980 TRY |
| Quality Control Analyst | Factory and Manufacturing | 113,780 TRY |
| Quality Control Inspector | Factory and Manufacturing | 93,220 TRY |
| Quality Control Manager | Factory and Manufacturing | 125,700 TRY |
| SHEQ Officer | Factory and Manufacturing | 39,560 TRY |
| Service Technician | Factory and Manufacturing | 34,980 TRY |
| Shipping Manager | Factory and Manufacturing | 125,700 TRY |
| Small Engine Mechanic | Factory and Manufacturing | 48,920 TRY |
| Spray Painter | Factory and Manufacturing | 25,440 TRY |
| Sterile Processing Technician | Factory and Manufacturing | 31,660 TRY |
| Structural Welder | Factory and Manufacturing | 23,080 TRY |
| Supply Chain Operative | Factory and Manufacturing | 77,100 TRY |
| Technical Operator | Factory and Manufacturing | 36,020 TRY |
| Technology Development Manager | Factory and Manufacturing | 142,300 TRY |
| Testing Technician | Factory and Manufacturing | 57,820 TRY |
| Toolmaker | Factory and Manufacturing | 45,060 TRY |
| Warehouse Forklift Operator | Factory and Manufacturing | 27,020 TRY |
| Warehouse Operative | Factory and Manufacturing | 26,400 TRY |
| Warehouse Worker | Factory and Manufacturing | 28,900 TRY |
| Warranty Handler | Factory and Manufacturing | 50,620 TRY |
| Welder | Factory and Manufacturing | 29,040 TRY |
| Workshop Manager | Factory and Manufacturing | 96,340 TRY |
Salary Comparison by City
If you want to compare salaries with different cities in Turkey, you can use the links below to explore the data for each specific city we have researched.
Cite This Resource
Use the tool below to generate a reference for this page in common citation styles.
<a href="https://worldsalaries.com/average-cnc-programmer-salary-in-izmir/turkey/">Average CNC Programmer Salary in Izmir, Turkey for 2026</a>
"Average CNC Programmer Salary in Izmir, Turkey for 2026." World Salaries. Accessed January 1, 2026. https://worldsalaries.com/average-cnc-programmer-salary-in-izmir/turkey/.
"Average CNC Programmer Salary in Izmir, Turkey for 2026." World Salaries, https://worldsalaries.com/average-cnc-programmer-salary-in-izmir/turkey/. Accessed 1 January, 2026.
Average CNC Programmer Salary in Izmir, Turkey for 2026. World Salaries. Retrieved from https://worldsalaries.com/average-cnc-programmer-salary-in-izmir/turkey/.