Average Toolmaker Salary in Sudan for 2024

In this article, we will look at the average Toolmaker salary for 2024 in Sudan and how that compares to other countries and professions. We'll also look at interesting salary data points like median salary, 25th and 75th percentile salaries, salary amounts based on experience, bonus ranges and more!

The data in this article has been compiled using official government salary data, salary surveys, and other sources such as job postings which contain salary information.

All salary information is in the local currency, which is the Sudanese pound. To keep things simple, we are using the SDG currency code instead of the currency symbol .

How Much Does a Toolmaker Make in Sudan?

A Toolmaker working in Sudan will typically earn around 212,500 SDG per year, and this can range from the lowest average salary of about 109,340 SDG to the highest average salary of 327,800 SDG.

Average Annual Salary
212,500 SDG
Average Monthly Salary
17,708 SDG

Lowest Annual Salary
109,340 SDG
Lowest Monthly Salary
9,111 SDG

Highest Annual Salary
327,800 SDG
Highest Monthly Salary
27,316 SDG

These are average salaries for a Toolmaker in Sudan and include benefits such as housing and transport. It's also possible for a Toolmaker to earn more or less than the average salaries shown above.

Toolmaker salaries will vary a lot based on your experience, location, skills, and gender. Keep reading below to research more data on each of these areas.

Distribution of Toolmaker Salaries in Sudan

So we've looked at the average salaries a Toolmaker will earn in Sudan. The next interesting data point is the distribution of salaries.

Salary ranges

We already know that a Toolmaker can earn between 109,340 SDG and 327,800 SDG on average in Sudan. This is known as the range in statistics.

The difference between the maximum and minimum values is a good indicator of variability in salaries, and can be used by employers to figure out how much they can expect to pay, and for employees to know how much they can earn.

Median salary

The median salary for a Toolmaker in Sudan is 204,000 SDG. This is the middle value in the distribution of salaries.

What this means is that approximately 50% of the population earn less than 204,000 SDG, and 50% of the population earn more than 204,000 SDG.

If you are earning more than the median salary, that's a good indicator that you are being paid well.

If you're not earning more than the median salary, your objective should be to increase your earnings to be at least as high as the median salary (which you can do by asking for a pay rise, looking for a better paying job, etc).

Percentiles

Percentiles are similar to the median salary, but instead of looking at the middle value, they look at the values in the top and bottom half of the distribution.

For the average Toolmaker salary in Sudan, 25% of the population are earning less than 143,200 SDG while 75% of the population earn more than 143,200 SDG.

75% of the population earn less than 254,800 SDG, and 25% of the population earn more than 254,800 SDG.

Like the median salary, the 25th and 75th percentile salaries can be used to determine which quartile you fall into so that you know whether you are being paid well enough compared to others in your profession and location.

The difference between a median and an average salary

The median and average salary are both indicators you can use to see if you are being paid fairly based on the overall population.

  • If your salary is higher than the average and the median salary, you are earning well compared to others.
  • If your salary is lower than the average and the median salary, it could indicate you are not being paid well enough.
  • If you are somewhere in between then it's tricky to determine if you are being paid well enough and you might need to research more closely.

Toolmaker Salary by Experience Level in Sudan

The most important factor in determining your salary after the specific profession is the number of years experience you have. It stands to reason that more years of experience will result in a higher wage.

We have researched the average toolmaker salary based on years of experience to give you an idea of how the average changes once you've worked for a certain amount of time.

  • 0 - 2 Years Experience. A Toolmaker in Sudan that has less than two years of experience can expect to earn somewhere in the region of 127,700 SDG.
  • 2 - 5 Years Experience. With two to five years of experience the average Toolmaker salary would increase to 169,000 SDG.
  • 5 - 10 Years Experience. From five to ten years of experience as a Toolmaker, the average salary would be 218,900 SDG.
  • 10 - 15 Years Experience. Once you have more than ten years of experience the average salary reaches around 266,000 SDG.
  • 15 - 20 Years Experience. A Toolmaker with 15 to 20 years of experience can earn an average of 292,000 SDG.
  • 20+ Years Experience. For a Toolmaker with more than 20 years, the expected average salary increases to 308,900 SDG.

Average Salary by Experience Chart

0-2 Years
127,700 SDG
2-5 Years +34%
169,000 SDG
5-10 Years +30%
218,900 SDG
10-15 Years +21%
266,000 SDG
15-20 Years +9%
292,000 SDG
20+ Years +5%
308,900 SDG

Toolmaker Salary by Education Level in Sudan

As well as experience in a job, your education plays a big role in how much you can earn. A lot of higher paying positions require a high level of education, but how much can a degree increase your salary?

In our research we have compared the salaries of employees in the same job and career level with different levels of education to see how much more you can earn at each education level.

The salary you can earn based on your education is very specific to both your location and the career path you choose.

In our research, we looked at the average salary for a Toolmaker in Sudan based on the education level of the employees in order to find out whether a better education level would increase your salary.

  • High School. A Toolmaker in Sudan with a high school education can earn an average salary of 151,800 SDG.

  • Certificate or Diploma. A Toolmaker in Sudan with a certificate or diploma education can earn an average salary of 214,000 SDG.

  • Bachelor's Degree. A Toolmaker in Sudan with a bachelor's degree education can earn an average salary of 296,000 SDG.

Average Salary by Education Chart

High School
151,800 SDG
Certificate or Diploma +43%
214,000 SDG
Bachelor's Degree +38%
296,000 SDG

How Much is a Master's Degree or MBA Program?

The approximate cost of a master's degree or post-graduate program like an MBA in Sudan is around 182,000 to 547,000 SDG and takes two years to complete.

As you can see above, there are financial benefits from reaching master's degree level, but don't expect to see much of a salary increase until you have completed the degree.

It's common for people to pursue an MBA or other post-graduate program in order to switch to a a job that pays more. On average, you can expect to earn around 10% more when switching to a new company.

Whether you decide to pursue a master's degree depends on many factors. If you are able to afford it, the numbers suggest that the return on investment is worth it and you could recover the costs in a few years from the salary increase you would receive.

Toolmaker Salary Compared by Gender

In the modern age, we know that there should never be a pay gap between men and women. Unfortunately, in many professions, there is still a significant difference between the salaries earned by men when compared to the salary of women in the same job.

In Sudan, a male toolmaker will earn an average of 231,000 SDG, while a female toolmaker will earn around 205,700 SDG.

This means that a male toolmaker earns approximately 12% more than a female toolmaker for performing the same job.

Average Salary by Gender Chart in Sudan

Male
231,000 SDG
Female -12%
205,700 SDG

Toolmaker Average Pay Raise in Sudan

In many countries, an annual pay raise is often given to employees to reward their service with a salary increase.

From our research, we can see that the average pay raise for a Toolmaker in Sudan is around 5% every 30 months.

The national average pay raise across all professions and industries in Sudan is around 4% every 29 months.

In this case, we can see that the number of months between the average pay raise is higher than the typical 12 months.

To make the data more meaningful, we can calculate what the approximate annual pay raise would be using a simple formula:

Annual Increase = ( Increase Rate ÷ Months ) × 12

So for this example, it would be:

Annual Increase = ( 5 ÷ 30 ) × 12  = 2%

What this means is that a Toolmaker in Sudan can expect to receive an average pay raise of around 2% every 12 months.

Annual Pay Raise by Industry in Sudan for 2024

In the chart below, you can see the average annual pay raise percentages for each of the major industries in Sudan.

You will see that companies in bigger and more lucrative industries tend to have the higher annual pay raises.

Banking
7%
Energy
5%
Information Technology
3%
Healthcare
1%
Travel
8%
Construction
6%
Education
4%

Toolmaker Bonus and Incentive Rates in Sudan

Another part of your overall compensation in a job is how much bonus you receive. Some job roles will be more likely to pay a bonus than others and also more likely to have higher bonus rates.

Generally speaking, jobs that are more involved with direct revenue generation will receive higher bonuses based on the performance towards revenue goals.

A Toolmaker is a low bonus based job, with 9% of employees reporting at least one bonus in the last 12 months.

91% reported that they had not received any bonuses in the previous 12 months.

For the employees that did receive a bonus in the previous 12 months, the reported bonuses ranged from 1% to 3%.

Received Bonus
9%
No Bonus
91%

What are the Types of Bonus?

There are a number of difference types of bonus you can receive in a job. Including:

  • Individual performance bonus - This is a bonus that is awarded to an individual employee for general performance in the job. It's the most common type of bonus.
  • Company performance bonus - This is a bonus that is awarded to a company employees to share profit with the staff.
  • Goal based bonus - This is a bonus that is awarded to an individual employee (or a team) for achieving specific goals, objectives, or milestones.
  • Holiday bonus - This type of bonus is usually paid around the holidays, often the end of the year, and is a token of appreciation for the hard work throughout the year.

Government vs Private Sector Salaries

Another commonly asked question is whether you get paid a higher salary working in the public (government) sector or the private sector.

Public sector employees in Sudan earn approximately 10% more than private sector employees in the same role.

Public Sector
467,100 SDG
Private Sector -10%
424,900 SDG

Salaries for Jobs Similar to a Toolmaker

In the table below, we have salary information for jobs that are similar to a Toolmaker in Sudan.

Job Title Category Salary
Assembly Foreman Factory and Manufacturing 130,400 SDG
Assembly Line Worker Factory and Manufacturing 127,700 SDG
Assembly Supervisor Factory and Manufacturing 181,600 SDG
Assistance Maintenance Manager Factory and Manufacturing 442,200 SDG
Assistant Shipping Manager Factory and Manufacturing 397,900 SDG
Chemical Equipment Controller Factory and Manufacturing 301,300 SDG
Chemical Technican Apprentice Factory and Manufacturing 254,800 SDG
CNC Machinist Factory and Manufacturing 281,500 SDG
CNC Operator Factory and Manufacturing 268,900 SDG
CNC Programmer Factory and Manufacturing 294,700 SDG
Colour Technologist Factory and Manufacturing 157,600 SDG
Contracts Manager Factory and Manufacturing 553,800 SDG
Data Collection Coordinator Factory and Manufacturing 214,000 SDG
Demand Planner Factory and Manufacturing 190,500 SDG
Derrick Operator Factory and Manufacturing 136,200 SDG
Director of Manufacturing Factory and Manufacturing 757,300 SDG
Dock Worker Factory and Manufacturing 125,100 SDG
Drying Technician Factory and Manufacturing 127,700 SDG
Equipment Operator Factory and Manufacturing 111,860 SDG
Export Sales Coordinator Factory and Manufacturing 392,300 SDG
Factory Superintendent Factory and Manufacturing 201,100 SDG
Factory Worker Factory and Manufacturing 128,900 SDG
Failure Analysis Technician Factory and Manufacturing 190,500 SDG
Fiberglass Laminator Factory and Manufacturing 128,500 SDG
Food Technologist Factory and Manufacturing 225,700 SDG
Forklift Driver Factory and Manufacturing 127,700 SDG
Forklift Operator Factory and Manufacturing 129,000 SDG
Forming Machine Operator Factory and Manufacturing 130,400 SDG
Furnace Operator Factory and Manufacturing 129,000 SDG
Gas Appliance Repairer Factory and Manufacturing 134,600 SDG
General Warehouse Associate Factory and Manufacturing 218,900 SDG
Heavy Equipment Operator Factory and Manufacturing 159,400 SDG
HSE Manager Factory and Manufacturing 545,300 SDG
Industrial Engineer Factory and Manufacturing 396,300 SDG
Industrial Machinery Mechanic Factory and Manufacturing 266,000 SDG
Industrial Production Manager Factory and Manufacturing 761,400 SDG
Industrial Safety and Health Engineer Factory and Manufacturing 417,100 SDG
Intake Operator Factory and Manufacturing 168,100 SDG
Key Account Manager Factory and Manufacturing 627,900 SDG
Lift Truck Operator Factory and Manufacturing 136,100 SDG
Loading Supervisor Factory and Manufacturing 225,300 SDG
Logistic Coordinator Factory and Manufacturing 318,800 SDG
Logistics Clerk Factory and Manufacturing 152,000 SDG
Machine Operator Factory and Manufacturing 130,400 SDG
Machinist Factory and Manufacturing 128,500 SDG
Maintenance Manager Factory and Manufacturing 500,100 SDG
Maintenance Store Clerk Factory and Manufacturing 134,600 SDG
Manufacturing Engineer Factory and Manufacturing 385,300 SDG
Manufacturing Engineering Manager Factory and Manufacturing 592,200 SDG
Manufacturing Engineering Technologist Factory and Manufacturing 450,300 SDG
Manufacturing Manager Factory and Manufacturing 679,200 SDG
Manufacturing Operative Factory and Manufacturing 217,900 SDG
Manufacturing Production Technician Factory and Manufacturing 159,500 SDG
Manufacturing Supervisor Factory and Manufacturing 351,200 SDG
Manufacturing Technician Factory and Manufacturing 146,200 SDG
Materials Manager Factory and Manufacturing 566,900 SDG
Materials Supervisor Factory and Manufacturing 352,000 SDG
Mechanical Fitter Engineer Factory and Manufacturing 421,400 SDG
Mechanical Foreman Factory and Manufacturing 129,000 SDG
Merchandise Planner Factory and Manufacturing 209,500 SDG
Metrology Engineer Factory and Manufacturing 407,100 SDG
Operations Engineer Factory and Manufacturing 377,200 SDG
Operations Manager Factory and Manufacturing 633,100 SDG
Order Management Coordinator Factory and Manufacturing 322,600 SDG
Order Processing Manager Factory and Manufacturing 529,600 SDG
Order Selector Factory and Manufacturing 159,100 SDG
Package Handler Factory and Manufacturing 124,400 SDG
Packaging Manager Factory and Manufacturing 431,100 SDG
Packer Factory and Manufacturing 134,600 SDG
Packing Deputy Supervisor Factory and Manufacturing 341,400 SDG
Planning Manager Factory and Manufacturing 582,700 SDG
Plant Manager Factory and Manufacturing 683,800 SDG
Precision Instrument Repairer Factory and Manufacturing 187,500 SDG
Process Technician Factory and Manufacturing 164,200 SDG
Product Manager Factory and Manufacturing 633,300 SDG
Production Analyst Factory and Manufacturing 565,100 SDG
Production Director Factory and Manufacturing 799,300 SDG
Production Engineer Factory and Manufacturing 409,000 SDG
Production Engineering Supervisor Factory and Manufacturing 600,000 SDG
Production Inspector Factory and Manufacturing 453,200 SDG
Production Laborer Factory and Manufacturing 119,020 SDG
Production Manager Factory and Manufacturing 739,500 SDG
Production Operator Factory and Manufacturing 169,000 SDG
Production Scheduler Factory and Manufacturing 301,600 SDG
Production Supervisor Factory and Manufacturing 394,300 SDG
Production Technician Factory and Manufacturing 172,200 SDG
Production Worker Factory and Manufacturing 168,100 SDG
Quality Control Analyst Factory and Manufacturing 525,700 SDG
Quality Control Inspector Factory and Manufacturing 431,100 SDG
Quality Control Manager Factory and Manufacturing 590,200 SDG
Service Technician Factory and Manufacturing 152,300 SDG
SHEQ Officer Factory and Manufacturing 190,500 SDG
Shipping Manager Factory and Manufacturing 623,700 SDG
Small Engine Mechanic Factory and Manufacturing 221,500 SDG
Spray Painter Factory and Manufacturing 124,400 SDG
Sterile Processing Technician Factory and Manufacturing 151,800 SDG
Structural Welder Factory and Manufacturing 115,220 SDG
Supply Chain Operative Factory and Manufacturing 357,300 SDG
Technical Operator Factory and Manufacturing 172,200 SDG
Technology Development Manager Factory and Manufacturing 688,900 SDG
Testing Technician Factory and Manufacturing 294,700 SDG
Warehouse Forklift Operator Factory and Manufacturing 125,700 SDG
Warehouse Operative Factory and Manufacturing 136,200 SDG
Warehouse Worker Factory and Manufacturing 137,400 SDG
Warranty Handler Factory and Manufacturing 237,400 SDG
Welder Factory and Manufacturing 129,000 SDG
Workshop Manager Factory and Manufacturing 472,000 SDG

Salary Comparison by City

If you want to compare salaries with different cities in Sudan, you can use the links below to explore the data for each specific city we have researched.

City Average Salary
Al Khartoom 233,900 SDG

Link To or Reference This Page

We spend a lot of time collecting, cleaning, merging, and formatting the data that is shown on the site to be as useful to you as possible.

If you found the data or information on this page useful in your research, please use the tool below to properly cite or reference World Salaries as the source. We appreciate your support!

  • "Average Toolmaker Salary in Sudan for 2024". World Salaries. Accessed on March 28, 2024. https://worldsalaries.com/average-toolmaker-salary-in-sudan/.

  • "Average Toolmaker Salary in Sudan for 2024". World Salaries, https://worldsalaries.com/average-toolmaker-salary-in-sudan/. Accessed 28 March, 2024

  • Average Toolmaker Salary in Sudan for 2024. World Salaries. Retrieved from https://worldsalaries.com/average-toolmaker-salary-in-sudan/.