Average Metrology Engineer Salary in Romania for 2026
A metrology engineer in Romania earns about 89,800 RON a year. That's 16% below the national average of 106,960 RON.
Pay ranges widely from country to country and from role to role. The lowest reported salaries in Romania sit around 44,800 RON a year, while the very top stretches to 139,100 RON. Everything on this page is in Romanian leu (RON, symbol lei), which lets you compare numbers like-for-like without worrying about exchange rates.
The numbers here are pulled together from official government wage data, large independent salary surveys, and aggregated worker-reported pay. Most reported salaries include the benefits that are common in Romania, such as housing or transport allowances, which is worth keeping in mind if you're comparing against a country where those are usually paid on top.
How much does a metrology engineer make in Romania?
A typical metrology engineer working in Romania brings home around 7,483 RON a month before tax. Entry-level pay starts near 44,800 RON, and the top of the ladder reaches roughly 139,100 RON for the most experienced and specialised people in the role.
The wide gap between low end and top end reflects how much pay can vary inside the same job title. A junior metrology engineer working at a small local employer earns very different money from a senior at a multinational. Skills, employer, city and years in the seat all push the number around.
How metrology engineer pay ranges in Romania
A good way to think about salary in Romania is to look at the distribution rather than the headline average. Half of all metrology engineers in Romania earn less than 90,900 RON a year, and the other half earn more. That middle number is the median, and it is usually more useful than the average for answering "is my pay normal here".
Looking at the quartiles fills in the picture. A quarter of earners take home less than 61,400 RON (the 25th percentile), and a quarter clear 115,640 RON (the 75th percentile). The middle 50% of metrology engineers sit somewhere inside that band, which is where the typical reader of this page probably lives.
The very lowest reported salaries sit around 44,800 RON. The highest stretch to 139,100 RON, though only a small fraction of earners ever reach that level. If you are deciding whether your own offer or current pay is reasonable, work out which of those four bands you would fall into and use that as your reference point.
Metrology engineer pay by experience in Romania
Years of experience is the single biggest lever on pay for a metrology engineer in Romania, ahead of education and almost any other single factor. The longer you have been in the role, the more your employer can trust you to handle complexity, mentor others and act independently, all of which command higher pay. The chart below shows how the typical metrology engineer salary changes as you move through the career ladder.
- 0-2 Years52,540 RON
- 2-5 Years+27% from previous66,480 RON
- 5-10 Years+34% from previous89,340 RON
- 10-15 Years+26% from previous112,660 RON
- 15-20 Years+6% from previous119,900 RON
- 20+ Years+8% from previous129,000 RON
The single largest jump on the ladder is from 2 - 5 Years to 5 - 10 Years, where pay rises by about 34%. That is the point at which a metrology engineer typically goes from "competent in the role" to "the person other people in the team learn from", and the market pays well for that step.
Metrology engineer pay by education in Romania
Education sits alongside experience as one of the biggest factors driving metrology engineer pay in Romania. Higher qualifications consistently pull higher salaries, but the size of the gap tends to be smallest at junior levels and widens as people move up. Two people in the same role with the same years of experience but different degrees can end up earning very different money once they reach mid-career.
Below is the average metrology engineer salary in Romania broken down by the highest level of education a worker has completed.
- Bachelor's Degree64,560 RON
- Master's Degree+57% from previous101,120 RON
Metrology engineer gender pay gap in Romania
The gender pay gap is a stubborn feature of almost every labour market, and Romania is no exception. Male metrology engineers in Romania earn an average of 89,340 RON a year, while female metrology engineers earn around 85,020 RON. That works out to a 5% gap in favour of men, even when comparing people doing the same work.
A pay gap of this size has a real long-term cost. Over a typical thirty-year career it can add up to several years of pay, and it compounds through pensions, retirement contributions and bonus-linked stock. Some of the gap is explained by women being more likely to work part-time, take career breaks, or be steered toward lower-paying specialisations. Some of it is straightforward unequal pay for the same job, which is harder to defend.
Metrology Engineer gender pay gap
5%
Men earn this much more than women on average in Romania.
Pay raises for a metrology engineer in Romania
Most countries hand out at least some kind of pay raise every year, typically when an employee's contract is reviewed or as a cost-of-living adjustment to keep wages roughly in step with inflation. The rhythm and size of those raises varies hugely between industries.
A typical worker doing this role in Romania sees a raise of about 9% every 20 months, which works out to roughly 5% on an annual basis. That figure is the typical underlying rate; in years where inflation runs high you can usually expect a bit more, and in flat-economy years a bit less.
Across all jobs in Romania, the national average raise is around 8% every 18 months.
By industry
Industries with the highest pay raises in Romania:
- Banking
- Energy
- Information Technology
- Healthcare1%
- Travel
- Construction
- Education
By experience level
Experienced workers tend to see larger raises. Retaining a senior is cheaper than replacing them, so employers fight harder for them.
- Junior Level3% - 5%
- Mid-Career
- Senior Level
- Top Management
Metrology engineer bonus rates in Romania
Bonuses are the other half of total compensation, and they vary a lot between jobs and industries. Some roles are paid almost entirely in base salary; others lean heavily on bonus structures tied to revenue, project completion or company performance. Whether a job pays a bonus, how big it is, and how often it lands all factor into whether the headline salary is actually a good offer.
53% of metrology engineers in Romania reported a bonus of some kind in the past twelve months. That makes a metrology engineer a moderate-bonus role overall, which is useful context when you're weighing up a job offer where the base is below market.
Among those who did receive a bonus, the size of the payment varied substantially. Reported bonuses ranged from 3% to 6% of base salary. The remaining 47% of metrology engineers reported no bonus at all over the same period.
Which careers pay bonuses in Romania
Revenue-facing roles tend to pay the biggest bonuses. Operational and support roles tend toward smaller, more predictable ones.
- Finance
- Architecture
- Sales
- Business Development
- Marketing / Advertising
- Information Technology
- Healthcare
- Insurance
- Customer Service
- Human Resources
- Construction
- Transport
- Hospitality
Metrology engineer: public vs private sector pay
Public-sector pay in Romania is about 7% more than private-sector pay for similar work. The private sector typically offers stronger upside and bigger bonuses; the public sector typically offers better benefits and stability.
Public vs private pay gap
6%
Public-sector workers earn this much more than private-sector workers in Romania on average.
Metrology engineer salary by city in Romania
Metrology engineer pay is not even across Romania. The chart below shows the highest-paying cities in the dataset, followed by the full location table.
- Bucharest
- Sibiu
- Timisoara
- Cluj-Napoca
- Brasov
| Location | Type | Average | Median | Range |
|---|---|---|---|---|
| Bucharest | City | 99,920 RON | 95,860 RON | 52,540-152,100 RON |
| Sibiu | City | 88,020 RON | 91,520 RON | 45,060-138,200 RON |
| Timisoara | City | 87,520 RON | 83,140 RON | 46,400-130,400 RON |
| Cluj-Napoca | City | 87,040 RON | 90,540 RON | 41,820-139,100 RON |
| Brasov | City | 80,180 RON | 85,020 RON | 37,620-124,400 RON |
Metrology Engineer in Romania: FAQs
-
How much does a metrology engineer make per month in Romania?
A metrology engineer in Romania earns about 7,483 RON a month before tax, based on an annual average of 89,800 RON.
-
What's the salary range for a metrology engineer in Romania?
Entry-level metrology engineers in Romania start near 44,800 RON. Top-end pay reaches around 139,100 RON. The middle 50% of earners sit between 61,400 and 115,640 RON.
-
Is the median metrology engineer salary in Romania higher or lower than the average?
The median is 90,900 RON, higher than the average of 89,800 RON. Half of metrology engineers in Romania earn below the median, half earn above it.
-
What's the gender pay gap for metrology engineers in Romania?
Men working as a metrology engineer in Romania earn around 5% more than women on average (89,340 vs 85,020 RON a year).
-
Do metrology engineers in Romania get bonuses?
About 53% of metrology engineers in Romania reported a bonus in the past 12 months. Reported bonuses ranged from 3% to 6% of base salary.
-
Do metrology engineers earn more in the public or private sector in Romania?
In Romania, the public sector pays a metrology engineer about 7% more on average. Public-sector pay tends to be steadier; private-sector pay tends to offer bigger upside.
-
How often do metrology engineers in Romania get a pay raise?
A metrology engineer in Romania sees a raise of around 9% every 20 months, equivalent to roughly 5% a year.