Average Mechanical Design Engineer Salary in Gambia for 2024

In this article, we will look at the average Mechanical Design Engineer salary for 2024 in Gambia and how that compares to other countries and professions. We'll also look at interesting salary data points like median salary, 25th and 75th percentile salaries, salary amounts based on experience, bonus ranges and more!

The data in this article has been compiled using official government salary data, salary surveys, and other sources such as job postings which contain salary information.

All salary information is in the local currency, which is the dalasi. To keep things simple, we are using the GMD currency code instead of the currency symbol D.

How Much Does a Mechanical Design Engineer Make in Gambia?

A Mechanical Design Engineer working in Gambia will typically earn around 176,800 GMD per year, and this can range from the lowest average salary of about 80,840 GMD to the highest average salary of 281,500 GMD.

Average Annual Salary
176,800 GMD
Average Monthly Salary
14,733 GMD

Lowest Annual Salary
80,840 GMD
Lowest Monthly Salary
6,736 GMD

Highest Annual Salary
281,500 GMD
Highest Monthly Salary
23,458 GMD

These are average salaries for a Mechanical Design Engineer in Gambia and include benefits such as housing and transport. It's also possible for a Mechanical Design Engineer to earn more or less than the average salaries shown above.

Mechanical Design Engineer salaries will vary a lot based on your experience, location, skills, and gender. Keep reading below to research more data on each of these areas.

Distribution of Mechanical Design Engineer Salaries in Gambia

So we've looked at the average salaries a Mechanical Design Engineer will earn in Gambia. The next interesting data point is the distribution of salaries.

Salary ranges

We already know that a Mechanical Design Engineer can earn between 80,840 GMD and 281,500 GMD on average in Gambia. This is known as the range in statistics.

The difference between the maximum and minimum values is a good indicator of variability in salaries, and can be used by employers to figure out how much they can expect to pay, and for employees to know how much they can earn.

Median salary

The median salary for a Mechanical Design Engineer in Gambia is 192,000 GMD. This is the middle value in the distribution of salaries.

What this means is that approximately 50% of the population earn less than 192,000 GMD, and 50% of the population earn more than 192,000 GMD.

If you are earning more than the median salary, that's a good indicator that you are being paid well.

If you're not earning more than the median salary, your objective should be to increase your earnings to be at least as high as the median salary (which you can do by asking for a pay rise, looking for a better paying job, etc).

Percentiles

Percentiles are similar to the median salary, but instead of looking at the middle value, they look at the values in the top and bottom half of the distribution.

For the average Mechanical Design Engineer salary in Gambia, 25% of the population are earning less than 123,400 GMD while 75% of the population earn more than 123,400 GMD.

75% of the population earn less than 254,700 GMD, and 25% of the population earn more than 254,700 GMD.

Like the median salary, the 25th and 75th percentile salaries can be used to determine which quartile you fall into so that you know whether you are being paid well enough compared to others in your profession and location.

The difference between a median and an average salary

The median and average salary are both indicators you can use to see if you are being paid fairly based on the overall population.

  • If your salary is higher than the average and the median salary, you are earning well compared to others.
  • If your salary is lower than the average and the median salary, it could indicate you are not being paid well enough.
  • If you are somewhere in between then it's tricky to determine if you are being paid well enough and you might need to research more closely.

Mechanical Design Engineer Salary by Experience Level in Gambia

The most important factor in determining your salary after the specific profession is the number of years experience you have. It stands to reason that more years of experience will result in a higher wage.

We have researched the average mechanical design engineer salary based on years of experience to give you an idea of how the average changes once you've worked for a certain amount of time.

  • 0 - 2 Years Experience. A Mechanical Design Engineer in Gambia that has less than two years of experience can expect to earn somewhere in the region of 93,660 GMD.
  • 2 - 5 Years Experience. With two to five years of experience the average Mechanical Design Engineer salary would increase to 125,100 GMD.
  • 5 - 10 Years Experience. From five to ten years of experience as a Mechanical Design Engineer, the average salary would be 183,600 GMD.
  • 10 - 15 Years Experience. Once you have more than ten years of experience the average salary reaches around 222,300 GMD.
  • 15 - 20 Years Experience. A Mechanical Design Engineer with 15 to 20 years of experience can earn an average of 239,300 GMD.
  • 20+ Years Experience. For a Mechanical Design Engineer with more than 20 years, the expected average salary increases to 263,200 GMD.

Average Salary by Experience Chart

0-2 Years
93,660 GMD
2-5 Years +34%
125,100 GMD
5-10 Years +48%
183,600 GMD
10-15 Years +22%
222,300 GMD
15-20 Years +9%
239,300 GMD
20+ Years +8%
263,200 GMD

Mechanical Design Engineer Salary by Education Level in Gambia

As well as experience in a job, your education plays a big role in how much you can earn. A lot of higher paying positions require a high level of education, but how much can a degree increase your salary?

In our research we have compared the salaries of employees in the same job and career level with different levels of education to see how much more you can earn at each education level.

The salary you can earn based on your education is very specific to both your location and the career path you choose.

In our research, we looked at the average salary for a Mechanical Design Engineer in Gambia based on the education level of the employees in order to find out whether a better education level would increase your salary.

  • Bachelor's Degree. A Mechanical Design Engineer in Gambia with a bachelor's degree education can earn an average salary of 106,360 GMD.

  • Master's Degree. A Mechanical Design Engineer in Gambia with a master's degree education can earn an average salary of 207,800 GMD.

Average Salary by Education Chart

Bachelor's Degree
106,360 GMD
Master's Degree +93%
207,800 GMD

How Much is a Master's Degree or MBA Program?

The approximate cost of a master's degree or post-graduate program like an MBA in Gambia is around 79,500 to 239,000 GMD and takes two years to complete.

As you can see above, there are financial benefits from reaching master's degree level, but don't expect to see much of a salary increase until you have completed the degree.

It's common for people to pursue an MBA or other post-graduate program in order to switch to a a job that pays more. On average, you can expect to earn around 10% more when switching to a new company.

Whether you decide to pursue a master's degree depends on many factors. If you are able to afford it, the numbers suggest that the return on investment is worth it and you could recover the costs in a few years from the salary increase you would receive.

Mechanical Design Engineer Salary Compared by Gender

In the modern age, we know that there should never be a pay gap between men and women. Unfortunately, in many professions, there is still a significant difference between the salaries earned by men when compared to the salary of women in the same job.

In Gambia, a male mechanical design engineer will earn an average of 192,600 GMD, while a female mechanical design engineer will earn around 159,500 GMD.

This means that a male mechanical design engineer earns approximately 21% more than a female mechanical design engineer for performing the same job.

Average Salary by Gender Chart in Gambia

Male
192,600 GMD
Female -21%
159,500 GMD

Mechanical Design Engineer Average Pay Raise in Gambia

In many countries, an annual pay raise is often given to employees to reward their service with a salary increase.

From our research, we can see that the average pay raise for a Mechanical Design Engineer in Gambia is around 7% every 29 months.

The national average pay raise across all professions and industries in Gambia is around 4% every 29 months.

In this case, we can see that the number of months between the average pay raise is higher than the typical 12 months.

To make the data more meaningful, we can calculate what the approximate annual pay raise would be using a simple formula:

Annual Increase = ( Increase Rate ÷ Months ) × 12

So for this example, it would be:

Annual Increase = ( 7 ÷ 29 ) × 12  = 3%

What this means is that a Mechanical Design Engineer in Gambia can expect to receive an average pay raise of around 3% every 12 months.

Annual Pay Raise by Industry in Gambia for 2024

In the chart below, you can see the average annual pay raise percentages for each of the major industries in Gambia.

You will see that companies in bigger and more lucrative industries tend to have the higher annual pay raises.

Banking
7%
Energy
5%
Information Technology
3%
Healthcare
1%
Travel
8%
Construction
6%
Education
4%

Mechanical Design Engineer Bonus and Incentive Rates in Gambia

Another part of your overall compensation in a job is how much bonus you receive. Some job roles will be more likely to pay a bonus than others and also more likely to have higher bonus rates.

Generally speaking, jobs that are more involved with direct revenue generation will receive higher bonuses based on the performance towards revenue goals.

A Mechanical Design Engineer is a low bonus based job, with 41% of employees reporting at least one bonus in the last 12 months.

59% reported that they had not received any bonuses in the previous 12 months.

For the employees that did receive a bonus in the previous 12 months, the reported bonuses ranged from 2% to 7%.

Received Bonus
41%
No Bonus
59%

What are the Types of Bonus?

There are a number of difference types of bonus you can receive in a job. Including:

  • Individual performance bonus - This is a bonus that is awarded to an individual employee for general performance in the job. It's the most common type of bonus.
  • Company performance bonus - This is a bonus that is awarded to a company employees to share profit with the staff.
  • Goal based bonus - This is a bonus that is awarded to an individual employee (or a team) for achieving specific goals, objectives, or milestones.
  • Holiday bonus - This type of bonus is usually paid around the holidays, often the end of the year, and is a token of appreciation for the hard work throughout the year.

Government vs Private Sector Salaries

Another commonly asked question is whether you get paid a higher salary working in the public (government) sector or the private sector.

Public sector employees in Gambia earn approximately 11% more than private sector employees in the same role.

Public Sector
205,700 GMD
Private Sector -11%
185,100 GMD

Salaries for Jobs Similar to a Mechanical Design Engineer

In the table below, we have salary information for jobs that are similar to a Mechanical Design Engineer in Gambia.

Job Title Category Salary
Acoustics Engineer Engineering 158,700 GMD
Assembly Engineering Technician Engineering 128,900 GMD
Assistant Chief Engineer Engineering 185,100 GMD
Associate Engineer Engineering 143,200 GMD
AutoCAD Drafter Engineering 97,760 GMD
Autocad Operator Engineering 104,140 GMD
Automation Engineer Engineering 167,100 GMD
Automation Engineer Engineering 180,300 GMD
Avionic System Support Engineer Engineering 150,000 GMD
Biochemical Engineer Engineering 152,100 GMD
BMS Engineer Engineering 150,000 GMD
Bridge and Lock Tender Engineering 93,140 GMD
Broadcast Engineer Engineering 157,600 GMD
CAD Design Engineer Engineering 174,000 GMD
CAD Designer Engineering 103,440 GMD
CAE Engineer Engineering 164,200 GMD
Ceramics Engineer Engineering 150,000 GMD
Chemical Engineer Engineering 167,100 GMD
Civil Drafter Engineering 97,840 GMD
Civil Engineer Engineering 163,800 GMD
Civil Site Engineer Engineering 172,200 GMD
Civil Technician Engineering 97,300 GMD
Commissioning Engineer Engineering 159,100 GMD
Communications Engineer Engineering 169,000 GMD
Condition Monitoring Engineer Engineering 143,200 GMD
Contract Associate Engineer Engineering 154,700 GMD
Contract Engineer Engineering 152,100 GMD
Control Systems Engineer Engineering 154,700 GMD
Controls Engineer Engineering 164,200 GMD
Controls Software Engineer Engineering 151,800 GMD
Corrosion Engineer Engineering 154,700 GMD
Design Engineer Engineering 159,400 GMD
Director of Engineering Engineering 317,700 GMD
Drafter Engineering 100,580 GMD
Drafting Manager Engineering 180,500 GMD
Drilling Engineer Engineering 161,600 GMD
Drilling Foreman Engineering 48,940 GMD
Electrical Draughtsman Engineering 79,240 GMD
Electrical Engineer Engineering 181,600 GMD
Electrical Engineering Manager Engineering 232,400 GMD
Electromechanical Engineering Technologist Engineering 183,600 GMD
Electromechanical Equipment Assembler Engineering 88,240 GMD
Energy Engineer Engineering 174,000 GMD
Engine Assembler Engineering 78,160 GMD
Engineer Engineering 168,100 GMD
Engineering Account Manager Engineering 187,300 GMD
Engineering Chief Designer Engineering 187,500 GMD
Engineering Consultant Engineering 222,300 GMD
Engineering Key Account Manager Engineering 239,000 GMD
Engineering Lab Technician Engineering 157,600 GMD
Engineering Manager Engineering 233,900 GMD
Engineering Planning Manager Engineering 221,500 GMD
Engineering Production Manager Engineering 282,500 GMD
Engineering Project Analyst Engineering 197,600 GMD
Engineering Project Coordinator Engineering 181,600 GMD
Engineering Project Director Engineering 332,500 GMD
Engineering Project Leader Engineering 197,600 GMD
Engineering Project Manager Engineering 233,600 GMD
Engineering Research and Development Manager Engineering 273,000 GMD
Engineering Safety Coordinator Engineering 130,400 GMD
Engineering Sales Manager Engineering 217,900 GMD
Engineering Technician Engineering 128,500 GMD
Engineering Technologist Engineering 125,700 GMD
Environmental Engineer Engineering 167,100 GMD
Equipment Engineer Engineering 152,300 GMD
Equipment Engineering Manager Engineering 215,100 GMD
Estimator Engineering 142,300 GMD
Fabrication Specialist Engineering 112,000 GMD
Fabricator Engineering 69,720 GMD
Facade Engineer Engineering 161,600 GMD
Fiber Analyst Engineering 96,960 GMD
Field Engineer Engineering 168,100 GMD
Field Engineering Manager Engineering 266,000 GMD
Fire Engineer Engineering 161,300 GMD
Fitter and Turner Engineering 49,020 GMD
Forestry Strategic Planner Engineering 187,300 GMD
Generation Engineer Engineering 172,200 GMD
Genetic Engineer Engineering 183,600 GMD
Geological Engineer Engineering 174,000 GMD
Geotechnical Engineer Engineering 181,600 GMD
Heavy Equipment Mechanic Engineering 81,180 GMD
Highway Engineer Engineering 168,100 GMD
HSE Professional Engineering 152,100 GMD
HVAC Engineer Engineering 172,200 GMD
HVAC Supervisor Engineering 148,300 GMD
Industrial Engineer Engineering 152,300 GMD
Industrial Engineering Technologist Engineering 159,400 GMD
Instrument Engineer Engineering 161,300 GMD
Instrument Technician Engineering 93,340 GMD
Instrumentation and Control Engineer Engineering 164,200 GMD
Instrumentation Designer Engineering 139,100 GMD
Instrumentation Engineer Engineering 159,100 GMD
Instrumentation Manager Engineering 159,100 GMD
Irrigation Engineer Engineering 152,000 GMD
Licensed Aircraft Engineer Engineering 172,400 GMD
Locomotive Engineer Engineering 151,800 GMD
Maintenance Engineer Engineering 159,400 GMD
Maintenance Fitter Engineering 58,860 GMD
Maintenance Manager Engineering 161,300 GMD
Manufacturing Engineer Engineering 159,400 GMD
Marine Engineer Engineering 161,600 GMD
Materials Engineer Engineering 157,600 GMD
Materials Researcher Engineering 152,100 GMD
Materials Technician Engineering 116,380 GMD
Mechanical and Electrical Engineer Engineering 183,600 GMD
Mechanical Designer Engineering 138,800 GMD
Mechanical Engineer Engineering 164,200 GMD
Mechanical Engineering Manager Engineering 237,400 GMD
Mechanical Inspector Engineering 152,300 GMD
Mechatronics Engineer Engineering 168,100 GMD
Mining Engineer Engineering 168,100 GMD
Oil and Petrochemical Engineer Engineering 176,800 GMD
Optical Engineer Engineering 161,300 GMD
Optical Instrument Assembler Engineering 83,420 GMD
PCB Assembler Engineering 61,840 GMD
Photonics Engineer Engineering 183,700 GMD
Photonics Technician Engineering 148,300 GMD
Pipeline Engineer Engineering 151,800 GMD
Piping Designer Engineering 88,240 GMD
Piping Engineer Engineering 142,300 GMD
Planning Engineer Engineering 158,700 GMD
Pressure Vessel Inspector Engineering 77,620 GMD
Principal Cost Engineer Engineering 172,400 GMD
Principal Engineer Engineering 164,200 GMD
Principal Support Engineer Engineering 161,300 GMD
Process Engineer Engineering 158,700 GMD
Process Operator Engineering 93,880 GMD
Product Development Engineer Engineering 175,900 GMD
Product Development Technician Engineering 125,100 GMD
Product Engineer Engineering 172,200 GMD
Product Safety Engineer Engineering 158,700 GMD
Production Engineer Engineering 154,700 GMD
Project Engineer Engineering 172,200 GMD
Proposal Manager Engineering 204,000 GMD
Purchasing Engineer Engineering 142,300 GMD
Quality Assurance Engineer Engineering 159,400 GMD
Rail Engineer Engineering 159,100 GMD
Regional Field Engineer Engineering 174,000 GMD
Robotics Engineer Engineering 176,800 GMD
Robotics Technician Engineering 139,100 GMD
Safety Engineer Engineering 172,200 GMD
Safety Inspector Engineering 127,700 GMD
Safety Manager Engineering 197,600 GMD
Safety Officer Engineering 86,760 GMD
Sales Engineer Engineering 167,100 GMD
Scheduling Engineer Engineering 152,300 GMD
Service Engineer Engineering 172,200 GMD
Solar Engineer Engineering 176,800 GMD
Staff Engineer Engineering 159,400 GMD
Static Equipment Engineer Engineering 161,600 GMD
Stationary Engineer Engineering 150,000 GMD
Stress Engineer Engineering 151,800 GMD
Structural Analysis Engineer Engineering 154,700 GMD
Structural Designer Engineering 138,200 GMD
Structural Engineer Engineering 167,100 GMD
Structural Technician Engineering 106,960 GMD
Supply Chain Specialist Engineering 168,100 GMD
Surveyor Engineering 124,400 GMD
Technical Affairs Officer Engineering 80,540 GMD
Technical Assistant Engineering 86,460 GMD
Technical Engineer Engineering 139,100 GMD
Technical Support Engineer Engineering 143,200 GMD
Tender Engineer Engineering 151,800 GMD
Test Development Engineer Engineering 161,300 GMD
Test Engineer Engineering 164,200 GMD
Transportation Engineer Engineering 159,100 GMD
Validation Engineer Engineering 138,800 GMD
Verification Engineer Engineering 158,700 GMD
Wastewater Engineer Engineering 154,700 GMD
Wind Energy Engineer Engineering 169,000 GMD
Wind Energy Operations Manager Engineering 215,100 GMD
Work Planner Engineering 114,820 GMD

Link To or Reference This Page

We spend a lot of time collecting, cleaning, merging, and formatting the data that is shown on the site to be as useful to you as possible.

If you found the data or information on this page useful in your research, please use the tool below to properly cite or reference World Salaries as the source. We appreciate your support!

  • "Average Mechanical Design Engineer Salary in Gambia for 2024". World Salaries. Accessed on March 28, 2024. https://worldsalaries.com/average-mechanical-design-engineer-salary-in-gambia/.

  • "Average Mechanical Design Engineer Salary in Gambia for 2024". World Salaries, https://worldsalaries.com/average-mechanical-design-engineer-salary-in-gambia/. Accessed 28 March, 2024

  • Average Mechanical Design Engineer Salary in Gambia for 2024. World Salaries. Retrieved from https://worldsalaries.com/average-mechanical-design-engineer-salary-in-gambia/.