Skip to content
worldsalaries .com

Average Machinist Salary in Bahamas for 2026

A machinist in Bahamas earns about 14,900 BSD a year. That's 69% below the national average of 48,600 BSD.

Pay ranges widely from country to country and from role to role. The lowest reported salaries in Bahamas sit around 6,510 BSD a year, while the very top stretches to 21,700 BSD. Everything on this page is in Bahamian dollar (BSD, symbol $), which lets you compare numbers like-for-like without worrying about exchange rates.

The numbers here are pulled together from official government wage data, large independent salary surveys, and aggregated worker-reported pay. Most reported salaries include the benefits that are common in Bahamas, such as housing or transport allowances, which is worth keeping in mind if you're comparing against a country where those are usually paid on top.


How much does a machinist make in Bahamas?

Average salary
14,900 BSD
1,241 BSD per month
Lowest reported
6,510 BSD
542 BSD per month
Highest reported
21,700 BSD
1,808 BSD per month

A typical machinist working in Bahamas brings home around 1,241 BSD a month before tax. Entry-level pay starts near 6,510 BSD, and the top of the ladder reaches roughly 21,700 BSD for the most experienced and specialised people in the role.

The wide gap between low end and top end reflects how much pay can vary inside the same job title. A junior machinist working at a small local employer earns very different money from a senior at a multinational. Skills, employer, city and years in the seat all push the number around.


How machinist pay ranges in Bahamas

A good way to think about salary in Bahamas is to look at the distribution rather than the headline average. Half of all machinists in Bahamas earn less than 13,600 BSD a year, and the other half earn more. That middle number is the median, and it is usually more useful than the average for answering "is my pay normal here".

Looking at the quartiles fills in the picture. A quarter of earners take home less than 10,910 BSD (the 25th percentile), and a quarter clear 17,500 BSD (the 75th percentile). The middle 50% of machinists sit somewhere inside that band, which is where the typical reader of this page probably lives.

The very lowest reported salaries sit around 6,510 BSD. The highest stretch to 21,700 BSD, though only a small fraction of earners ever reach that level. If you are deciding whether your own offer or current pay is reasonable, work out which of those four bands you would fall into and use that as your reference point.

6,510
Low
13,600
Median
21,700
High
10,910
25th
17,500
75th
The middle 50% sit between the 25th and 75th percentile Tails are the lowest and highest reported All figures in BSD

Machinist pay by experience in Bahamas

Years of experience is the single biggest lever on pay for a machinist in Bahamas, ahead of education and almost any other single factor. The longer you have been in the role, the more your employer can trust you to handle complexity, mentor others and act independently, all of which command higher pay. The chart below shows how the typical machinist salary changes as you move through the career ladder.

  • 0-2 Years
    8,480 BSD
  • 2-5 Years
    +45% from previous
    12,300 BSD
  • 5-10 Years
    +28% from previous
    15,800 BSD
  • 10-15 Years
    +7% from previous
    16,900 BSD
  • 15-20 Years
    +20% from previous
    20,200 BSD
  • 20+ Years
    19,100 BSD

The single largest jump on the ladder is from 0 - 2 Years to 2 - 5 Years, where pay rises by about 45%. That is the point at which a machinist typically goes from "competent in the role" to "the person other people in the team learn from", and the market pays well for that step.


Machinist pay by education in Bahamas

Education sits alongside experience as one of the biggest factors driving machinist pay in Bahamas. Higher qualifications consistently pull higher salaries, but the size of the gap tends to be smallest at junior levels and widens as people move up. Two people in the same role with the same years of experience but different degrees can end up earning very different money once they reach mid-career.

Below is the average machinist salary in Bahamas broken down by the highest level of education a worker has completed.

  • High School
    11,300 BSD
  • Certificate or Diploma
    +50% from previous
    16,900 BSD

Machinist gender pay gap in Bahamas

The gender pay gap is a stubborn feature of almost every labour market, and Bahamas is no exception. Male machinists in Bahamas earn an average of 14,000 BSD a year, while female machinists earn around 13,600 BSD. That works out to a 3% gap in favour of men, even when comparing people doing the same work.

A pay gap of this size has a real long-term cost. Over a typical thirty-year career it can add up to several years of pay, and it compounds through pensions, retirement contributions and bonus-linked stock. Some of the gap is explained by women being more likely to work part-time, take career breaks, or be steered toward lower-paying specialisations. Some of it is straightforward unequal pay for the same job, which is harder to defend.

Machinist gender pay gap

3%

Men earn this much more than women on average in Bahamas.

Men 14,000 BSD
Women 13,600 BSD

Pay raises for a machinist in Bahamas

Most countries hand out at least some kind of pay raise every year, typically when an employee's contract is reviewed or as a cost-of-living adjustment to keep wages roughly in step with inflation. The rhythm and size of those raises varies hugely between industries.

A typical worker doing this role in Bahamas sees a raise of about 5% every 29 months, which works out to roughly 2% on an annual basis. That figure is the typical underlying rate; in years where inflation runs high you can usually expect a bit more, and in flat-economy years a bit less.

Across all jobs in Bahamas, the national average raise is around 5% every 28 months.

By industry

Industries with the highest pay raises in Bahamas:

  • Banking
  • Energy
  • Information Technology
  • Healthcare
    1%
  • Travel
  • Construction
  • Education

By experience level

Experienced workers tend to see larger raises. Retaining a senior is cheaper than replacing them, so employers fight harder for them.

  • Junior Level
    3% - 5%
  • Mid-Career
  • Senior Level
  • Top Management

Machinist bonus rates in Bahamas

Bonuses are the other half of total compensation, and they vary a lot between jobs and industries. Some roles are paid almost entirely in base salary; others lean heavily on bonus structures tied to revenue, project completion or company performance. Whether a job pays a bonus, how big it is, and how often it lands all factor into whether the headline salary is actually a good offer.

9%

9% of machinists in Bahamas reported a bonus of some kind in the past twelve months. That makes a machinist a low-bonus role overall, which is useful context when you're weighing up a job offer where the base is below market.

Among those who did receive a bonus, the size of the payment varied substantially. Reported bonuses ranged from 1% to 3% of base salary. The remaining 91% of machinists reported no bonus at all over the same period.

Which careers pay bonuses in Bahamas

Revenue-facing roles tend to pay the biggest bonuses. Operational and support roles tend toward smaller, more predictable ones.

  • Finance
  • Architecture
  • Sales
  • Business Development
  • Marketing / Advertising
  • Information Technology
  • Healthcare
  • Insurance
  • Customer Service
  • Human Resources
  • Construction
  • Transport
  • Hospitality

Machinist: public vs private sector pay

Public-sector pay in Bahamas is about 11% more than private-sector pay for similar work. The private sector typically offers stronger upside and bigger bonuses; the public sector typically offers better benefits and stability.

Public vs private pay gap

10%

Public-sector workers earn this much more than private-sector workers in Bahamas on average.

Public sector 51,500 BSD
Private sector 46,300 BSD


Machinist in Bahamas: FAQs

  • How much does a machinist make per month in Bahamas?

    A machinist in Bahamas earns about 1,241 BSD a month before tax, based on an annual average of 14,900 BSD.

  • What's the salary range for a machinist in Bahamas?

    Entry-level machinists in Bahamas start near 6,510 BSD. Top-end pay reaches around 21,700 BSD. The middle 50% of earners sit between 10,910 and 17,500 BSD.

  • Is the median machinist salary in Bahamas higher or lower than the average?

    The median is 13,600 BSD, lower than the average of 14,900 BSD. Half of machinists in Bahamas earn below the median, half earn above it.

  • What's the gender pay gap for machinists in Bahamas?

    Men working as a machinist in Bahamas earn around 3% more than women on average (14,000 vs 13,600 BSD a year).

  • Do machinists in Bahamas get bonuses?

    About 9% of machinists in Bahamas reported a bonus in the past 12 months. Reported bonuses ranged from 1% to 3% of base salary.

  • Do machinists earn more in the public or private sector in Bahamas?

    In Bahamas, the public sector pays a machinist about 11% more on average. Public-sector pay tends to be steadier; private-sector pay tends to offer bigger upside.

  • How often do machinists in Bahamas get a pay raise?

    A machinist in Bahamas sees a raise of around 5% every 29 months, equivalent to roughly 2% a year.