Average CNC Programmer Salary in Malawi for 2024

In this article, we will look at the average CNC Programmer salary for 2024 in Malawi and how that compares to other countries and professions. We'll also look at interesting salary data points like median salary, 25th and 75th percentile salaries, salary amounts based on experience, bonus ranges and more!

The data in this article has been compiled using official government salary data, salary surveys, and other sources such as job postings which contain salary information.

All salary information is in the local currency, which is the Malawian kwacha. To keep things simple, we are using the MWK currency code instead of the currency symbol MK.

How Much Does an CNC Programmer Make in Malawi?

An CNC Programmer working in Malawi will typically earn around 1,345,400 MWK per year, and this can range from the lowest average salary of about 701,400 MWK to the highest average salary of 2,065,400 MWK.

Average Annual Salary
1,345,400 MWK
Average Monthly Salary
112,116 MWK

Lowest Annual Salary
701,400 MWK
Lowest Monthly Salary
58,450 MWK

Highest Annual Salary
2,065,400 MWK
Highest Monthly Salary
172,116 MWK

These are average salaries for an CNC Programmer in Malawi and include benefits such as housing and transport. It's also possible for an CNC Programmer to earn more or less than the average salaries shown above.

CNC Programmer salaries will vary a lot based on your experience, location, skills, and gender. Keep reading below to research more data on each of these areas.

Distribution of CNC Programmer Salaries in Malawi

So we've looked at the average salaries an CNC Programmer will earn in Malawi. The next interesting data point is the distribution of salaries.

Salary ranges

We already know that an CNC Programmer can earn between 701,400 MWK and 2,065,400 MWK on average in Malawi. This is known as the range in statistics.

The difference between the maximum and minimum values is a good indicator of variability in salaries, and can be used by employers to figure out how much they can expect to pay, and for employees to know how much they can earn.

Median salary

The median salary for an CNC Programmer in Malawi is 1,296,900 MWK. This is the middle value in the distribution of salaries.

What this means is that approximately 50% of the population earn less than 1,296,900 MWK, and 50% of the population earn more than 1,296,900 MWK.

If you are earning more than the median salary, that's a good indicator that you are being paid well.

If you're not earning more than the median salary, your objective should be to increase your earnings to be at least as high as the median salary (which you can do by asking for a pay rise, looking for a better paying job, etc).

Percentiles

Percentiles are similar to the median salary, but instead of looking at the middle value, they look at the values in the top and bottom half of the distribution.

For the average CNC Programmer salary in Malawi, 25% of the population are earning less than 899,200 MWK while 75% of the population earn more than 899,200 MWK.

75% of the population earn less than 1,606,100 MWK, and 25% of the population earn more than 1,606,100 MWK.

Like the median salary, the 25th and 75th percentile salaries can be used to determine which quartile you fall into so that you know whether you are being paid well enough compared to others in your profession and location.

The difference between a median and an average salary

The median and average salary are both indicators you can use to see if you are being paid fairly based on the overall population.

  • If your salary is higher than the average and the median salary, you are earning well compared to others.
  • If your salary is lower than the average and the median salary, it could indicate you are not being paid well enough.
  • If you are somewhere in between then it's tricky to determine if you are being paid well enough and you might need to research more closely.

CNC Programmer Salary by Experience Level in Malawi

The most important factor in determining your salary after the specific profession is the number of years experience you have. It stands to reason that more years of experience will result in a higher wage.

We have researched the average cnc programmer salary based on years of experience to give you an idea of how the average changes once you've worked for a certain amount of time.

  • 0 - 2 Years Experience. An CNC Programmer in Malawi that has less than two years of experience can expect to earn somewhere in the region of 795,700 MWK.
  • 2 - 5 Years Experience. With two to five years of experience the average CNC Programmer salary would increase to 1,067,500 MWK.
  • 5 - 10 Years Experience. From five to ten years of experience as an CNC Programmer, the average salary would be 1,391,600 MWK.
  • 10 - 15 Years Experience. Once you have more than ten years of experience the average salary reaches around 1,678,300 MWK.
  • 15 - 20 Years Experience. An CNC Programmer with 15 to 20 years of experience can earn an average of 1,835,700 MWK.
  • 20+ Years Experience. For an CNC Programmer with more than 20 years, the expected average salary increases to 1,930,500 MWK.

Average Salary by Experience Chart

0-2 Years
795,700 MWK
2-5 Years +34%
1,067,500 MWK
5-10 Years +30%
1,391,600 MWK
10-15 Years +21%
1,678,300 MWK
15-20 Years +9%
1,835,700 MWK
20+ Years +5%
1,930,500 MWK

CNC Programmer Salary by Education Level in Malawi

As well as experience in a job, your education plays a big role in how much you can earn. A lot of higher paying positions require a high level of education, but how much can a degree increase your salary?

In our research we have compared the salaries of employees in the same job and career level with different levels of education to see how much more you can earn at each education level.

The salary you can earn based on your education is very specific to both your location and the career path you choose.

In our research, we looked at the average salary for an CNC Programmer in Malawi based on the education level of the employees in order to find out whether a better education level would increase your salary.

  • Certificate or Diploma. An CNC Programmer in Malawi with a certificate or diploma education can earn an average salary of 1,000,700 MWK.

  • Bachelor's Degree. An CNC Programmer in Malawi with a bachelor's degree education can earn an average salary of 1,800,200 MWK.

Average Salary by Education Chart

Certificate or Diploma
1,000,700 MWK
Bachelor's Degree +80%
1,800,200 MWK

How Much is a Master's Degree or MBA Program?

The approximate cost of a master's degree or post-graduate program like an MBA in Malawi is around 822,000 to 2,470,000 MWK and takes two years to complete.

As you can see above, there are financial benefits from reaching master's degree level, but don't expect to see much of a salary increase until you have completed the degree.

It's common for people to pursue an MBA or other post-graduate program in order to switch to a a job that pays more. On average, you can expect to earn around 10% more when switching to a new company.

Whether you decide to pursue a master's degree depends on many factors. If you are able to afford it, the numbers suggest that the return on investment is worth it and you could recover the costs in a few years from the salary increase you would receive.

CNC Programmer Salary Compared by Gender

In the modern age, we know that there should never be a pay gap between men and women. Unfortunately, in many professions, there is still a significant difference between the salaries earned by men when compared to the salary of women in the same job.

In Malawi, a male cnc programmer will earn an average of 1,440,700 MWK, while a female cnc programmer will earn around 1,296,900 MWK.

This means that a male cnc programmer earns approximately 11% more than a female cnc programmer for performing the same job.

Average Salary by Gender Chart in Malawi

Male
1,440,700 MWK
Female -11%
1,296,900 MWK

CNC Programmer Average Pay Raise in Malawi

In many countries, an annual pay raise is often given to employees to reward their service with a salary increase.

From our research, we can see that the average pay raise for an CNC Programmer in Malawi is around 5% every 30 months.

The national average pay raise across all professions and industries in Malawi is around 4% every 29 months.

In this case, we can see that the number of months between the average pay raise is higher than the typical 12 months.

To make the data more meaningful, we can calculate what the approximate annual pay raise would be using a simple formula:

Annual Increase = ( Increase Rate ÷ Months ) × 12

So for this example, it would be:

Annual Increase = ( 5 ÷ 30 ) × 12  = 2%

What this means is that an CNC Programmer in Malawi can expect to receive an average pay raise of around 2% every 12 months.

Annual Pay Raise by Industry in Malawi for 2024

In the chart below, you can see the average annual pay raise percentages for each of the major industries in Malawi.

You will see that companies in bigger and more lucrative industries tend to have the higher annual pay raises.

Banking
3%
Energy
6%
Information Technology
9%
Healthcare
3%
Travel
6%
Construction
9%
Education
3%

CNC Programmer Bonus and Incentive Rates in Malawi

Another part of your overall compensation in a job is how much bonus you receive. Some job roles will be more likely to pay a bonus than others and also more likely to have higher bonus rates.

Generally speaking, jobs that are more involved with direct revenue generation will receive higher bonuses based on the performance towards revenue goals.

An CNC Programmer is a low bonus based job, with 10% of employees reporting at least one bonus in the last 12 months.

90% reported that they had not received any bonuses in the previous 12 months.

For the employees that did receive a bonus in the previous 12 months, the reported bonuses ranged from 1% to 3%.

Received Bonus
10%
No Bonus
90%

What are the Types of Bonus?

There are a number of difference types of bonus you can receive in a job. Including:

  • Individual performance bonus - This is a bonus that is awarded to an individual employee for general performance in the job. It's the most common type of bonus.
  • Company performance bonus - This is a bonus that is awarded to a company employees to share profit with the staff.
  • Goal based bonus - This is a bonus that is awarded to an individual employee (or a team) for achieving specific goals, objectives, or milestones.
  • Holiday bonus - This type of bonus is usually paid around the holidays, often the end of the year, and is a token of appreciation for the hard work throughout the year.

Government vs Private Sector Salaries

Another commonly asked question is whether you get paid a higher salary working in the public (government) sector or the private sector.

Public sector employees in Malawi earn approximately 14% more than private sector employees in the same role.

Public Sector
2,136,200 MWK
Private Sector -14%
1,870,400 MWK

Salaries for Jobs Similar to an CNC Programmer

In the table below, we have salary information for jobs that are similar to an CNC Programmer in Malawi.

Job Title Category Salary
Assembly Foreman Factory and Manufacturing 576,500 MWK
Assembly Line Worker Factory and Manufacturing 559,000 MWK
Assembly Supervisor Factory and Manufacturing 814,500 MWK
Assistance Maintenance Manager Factory and Manufacturing 2,015,600 MWK
Assistant Shipping Manager Factory and Manufacturing 1,788,300 MWK
Chemical Equipment Controller Factory and Manufacturing 1,259,300 MWK
Chemical Technican Apprentice Factory and Manufacturing 1,122,900 MWK
CNC Machinist Factory and Manufacturing 1,259,300 MWK
CNC Operator Factory and Manufacturing 1,235,600 MWK
Colour Technologist Factory and Manufacturing 712,100 MWK
Contracts Manager Factory and Manufacturing 2,230,100 MWK
Data Collection Coordinator Factory and Manufacturing 974,600 MWK
Demand Planner Factory and Manufacturing 821,500 MWK
Derrick Operator Factory and Manufacturing 592,200 MWK
Director of Manufacturing Factory and Manufacturing 3,503,800 MWK
Dock Worker Factory and Manufacturing 541,700 MWK
Drying Technician Factory and Manufacturing 516,100 MWK
Equipment Operator Factory and Manufacturing 518,900 MWK
Export Sales Coordinator Factory and Manufacturing 1,716,600 MWK
Factory Superintendent Factory and Manufacturing 830,500 MWK
Factory Worker Factory and Manufacturing 623,700 MWK
Failure Analysis Technician Factory and Manufacturing 843,600 MWK
Fiberglass Laminator Factory and Manufacturing 558,300 MWK
Food Technologist Factory and Manufacturing 1,058,800 MWK
Forklift Driver Factory and Manufacturing 578,500 MWK
Forklift Operator Factory and Manufacturing 581,000 MWK
Forming Machine Operator Factory and Manufacturing 588,500 MWK
Furnace Operator Factory and Manufacturing 537,300 MWK
Gas Appliance Repairer Factory and Manufacturing 544,800 MWK
General Warehouse Associate Factory and Manufacturing 902,100 MWK
Heavy Equipment Operator Factory and Manufacturing 735,500 MWK
HSE Manager Factory and Manufacturing 2,495,600 MWK
Industrial Engineer Factory and Manufacturing 1,825,000 MWK
Industrial Machinery Mechanic Factory and Manufacturing 1,134,500 MWK
Industrial Production Manager Factory and Manufacturing 3,312,100 MWK
Industrial Safety and Health Engineer Factory and Manufacturing 1,678,300 MWK
Intake Operator Factory and Manufacturing 748,600 MWK
Key Account Manager Factory and Manufacturing 2,819,600 MWK
Lift Truck Operator Factory and Manufacturing 582,700 MWK
Loading Supervisor Factory and Manufacturing 1,038,700 MWK
Logistic Coordinator Factory and Manufacturing 1,476,700 MWK
Logistics Clerk Factory and Manufacturing 681,900 MWK
Machine Operator Factory and Manufacturing 543,200 MWK
Machinist Factory and Manufacturing 568,500 MWK
Maintenance Manager Factory and Manufacturing 2,065,400 MWK
Maintenance Store Clerk Factory and Manufacturing 573,500 MWK
Manufacturing Engineer Factory and Manufacturing 1,825,000 MWK
Manufacturing Engineering Manager Factory and Manufacturing 2,641,300 MWK
Manufacturing Engineering Technologist Factory and Manufacturing 2,076,600 MWK
Manufacturing Manager Factory and Manufacturing 2,953,200 MWK
Manufacturing Operative Factory and Manufacturing 999,500 MWK
Manufacturing Production Technician Factory and Manufacturing 687,100 MWK
Manufacturing Supervisor Factory and Manufacturing 1,547,500 MWK
Manufacturing Technician Factory and Manufacturing 663,100 MWK
Materials Manager Factory and Manufacturing 2,471,700 MWK
Materials Supervisor Factory and Manufacturing 1,570,900 MWK
Mechanical Fitter Engineer Factory and Manufacturing 1,858,200 MWK
Mechanical Foreman Factory and Manufacturing 580,600 MWK
Merchandise Planner Factory and Manufacturing 995,200 MWK
Metrology Engineer Factory and Manufacturing 1,678,300 MWK
Operations Engineer Factory and Manufacturing 1,765,300 MWK
Operations Manager Factory and Manufacturing 2,653,700 MWK
Order Management Coordinator Factory and Manufacturing 1,405,700 MWK
Order Processing Manager Factory and Manufacturing 2,352,500 MWK
Order Selector Factory and Manufacturing 660,500 MWK
Package Handler Factory and Manufacturing 548,500 MWK
Packaging Manager Factory and Manufacturing 1,942,700 MWK
Packer Factory and Manufacturing 596,100 MWK
Packing Deputy Supervisor Factory and Manufacturing 1,440,700 MWK
Planning Manager Factory and Manufacturing 2,557,100 MWK
Plant Manager Factory and Manufacturing 3,144,700 MWK
Precision Instrument Repairer Factory and Manufacturing 839,500 MWK
Process Technician Factory and Manufacturing 687,100 MWK
Product Manager Factory and Manufacturing 2,854,700 MWK
Production Analyst Factory and Manufacturing 2,435,600 MWK
Production Director Factory and Manufacturing 3,432,600 MWK
Production Engineer Factory and Manufacturing 1,870,400 MWK
Production Engineering Supervisor Factory and Manufacturing 2,819,600 MWK
Production Inspector Factory and Manufacturing 1,858,200 MWK
Production Laborer Factory and Manufacturing 501,400 MWK
Production Manager Factory and Manufacturing 3,217,900 MWK
Production Operator Factory and Manufacturing 778,900 MWK
Production Scheduler Factory and Manufacturing 1,320,500 MWK
Production Supervisor Factory and Manufacturing 1,728,900 MWK
Production Technician Factory and Manufacturing 768,900 MWK
Production Worker Factory and Manufacturing 717,900 MWK
Quality Control Analyst Factory and Manufacturing 2,339,200 MWK
Quality Control Inspector Factory and Manufacturing 1,811,000 MWK
Quality Control Manager Factory and Manufacturing 2,688,800 MWK
Service Technician Factory and Manufacturing 675,200 MWK
SHEQ Officer Factory and Manufacturing 832,300 MWK
Shipping Manager Factory and Manufacturing 2,734,500 MWK
Small Engine Mechanic Factory and Manufacturing 985,700 MWK
Spray Painter Factory and Manufacturing 556,000 MWK
Sterile Processing Technician Factory and Manufacturing 687,100 MWK
Structural Welder Factory and Manufacturing 510,000 MWK
Supply Chain Operative Factory and Manufacturing 1,594,500 MWK
Technical Operator Factory and Manufacturing 772,700 MWK
Technology Development Manager Factory and Manufacturing 3,299,800 MWK
Testing Technician Factory and Manufacturing 1,273,300 MWK
Toolmaker Factory and Manufacturing 938,100 MWK
Warehouse Forklift Operator Factory and Manufacturing 565,100 MWK
Warehouse Operative Factory and Manufacturing 642,800 MWK
Warehouse Worker Factory and Manufacturing 598,600 MWK
Warranty Handler Factory and Manufacturing 1,009,200 MWK
Welder Factory and Manufacturing 539,700 MWK
Workshop Manager Factory and Manufacturing 2,110,600 MWK

Link To or Reference This Page

We spend a lot of time collecting, cleaning, merging, and formatting the data that is shown on the site to be as useful to you as possible.

If you found the data or information on this page useful in your research, please use the tool below to properly cite or reference World Salaries as the source. We appreciate your support!

  • "Average CNC Programmer Salary in Malawi for 2024". World Salaries. Accessed on March 28, 2024. https://worldsalaries.com/average-cnc-programmer-salary-in-malawi/.

  • "Average CNC Programmer Salary in Malawi for 2024". World Salaries, https://worldsalaries.com/average-cnc-programmer-salary-in-malawi/. Accessed 28 March, 2024

  • Average CNC Programmer Salary in Malawi for 2024. World Salaries. Retrieved from https://worldsalaries.com/average-cnc-programmer-salary-in-malawi/.