Average CNC Programmer Salary in Åland Islands for 2024

In this article, we will look at the average CNC Programmer salary for 2024 in Åland Islands and how that compares to other countries and professions. We'll also look at interesting salary data points like median salary, 25th and 75th percentile salaries, salary amounts based on experience, bonus ranges and more!

The data in this article has been compiled using official government salary data, salary surveys, and other sources such as job postings which contain salary information.

All salary information is in the local currency, which is the Euro. To keep things simple, we are using the EUR currency code instead of the currency symbol €.

How Much Does an CNC Programmer Make in Åland Islands?

An CNC Programmer working in Åland Islands will typically earn around 31,380 EUR per year, and this can range from the lowest average salary of about 17,540 EUR to the highest average salary of 45,580 EUR.

Average Annual Salary
31,380 EUR
Average Monthly Salary
2,615 EUR

Lowest Annual Salary
17,540 EUR
Lowest Monthly Salary
1,461 EUR

Highest Annual Salary
45,580 EUR
Highest Monthly Salary
3,798 EUR

These are average salaries for an CNC Programmer in Åland Islands and include benefits such as housing and transport. It's also possible for an CNC Programmer to earn more or less than the average salaries shown above.

CNC Programmer salaries will vary a lot based on your experience, location, skills, and gender. Keep reading below to research more data on each of these areas.

Distribution of CNC Programmer Salaries in Åland Islands

So we've looked at the average salaries an CNC Programmer will earn in Åland Islands. The next interesting data point is the distribution of salaries.

Salary ranges

We already know that an CNC Programmer can earn between 17,540 EUR and 45,580 EUR on average in Åland Islands. This is known as the range in statistics.

The difference between the maximum and minimum values is a good indicator of variability in salaries, and can be used by employers to figure out how much they can expect to pay, and for employees to know how much they can earn.

Median salary

The median salary for an CNC Programmer in Åland Islands is 27,560 EUR. This is the middle value in the distribution of salaries.

What this means is that approximately 50% of the population earn less than 27,560 EUR, and 50% of the population earn more than 27,560 EUR.

If you are earning more than the median salary, that's a good indicator that you are being paid well.

If you're not earning more than the median salary, your objective should be to increase your earnings to be at least as high as the median salary (which you can do by asking for a pay rise, looking for a better paying job, etc).

Percentiles

Percentiles are similar to the median salary, but instead of looking at the middle value, they look at the values in the top and bottom half of the distribution.

For the average CNC Programmer salary in Åland Islands, 25% of the population are earning less than 21,020 EUR while 75% of the population earn more than 21,020 EUR.

75% of the population earn less than 34,380 EUR, and 25% of the population earn more than 34,380 EUR.

Like the median salary, the 25th and 75th percentile salaries can be used to determine which quartile you fall into so that you know whether you are being paid well enough compared to others in your profession and location.

The difference between a median and an average salary

The median and average salary are both indicators you can use to see if you are being paid fairly based on the overall population.

  • If your salary is higher than the average and the median salary, you are earning well compared to others.
  • If your salary is lower than the average and the median salary, it could indicate you are not being paid well enough.
  • If you are somewhere in between then it's tricky to determine if you are being paid well enough and you might need to research more closely.

CNC Programmer Salary by Experience Level in Åland Islands

The most important factor in determining your salary after the specific profession is the number of years experience you have. It stands to reason that more years of experience will result in a higher wage.

We have researched the average cnc programmer salary based on years of experience to give you an idea of how the average changes once you've worked for a certain amount of time.

  • 0 - 2 Years Experience. An CNC Programmer in Åland Islands that has less than two years of experience can expect to earn somewhere in the region of 19,360 EUR.
  • 2 - 5 Years Experience. With two to five years of experience the average CNC Programmer salary would increase to 24,280 EUR.
  • 5 - 10 Years Experience. From five to ten years of experience as an CNC Programmer, the average salary would be 31,980 EUR.
  • 10 - 15 Years Experience. Once you have more than ten years of experience the average salary reaches around 36,720 EUR.
  • 15 - 20 Years Experience. An CNC Programmer with 15 to 20 years of experience can earn an average of 43,360 EUR.
  • 20+ Years Experience. For an CNC Programmer with more than 20 years, the expected average salary increases to 42,960 EUR.

Average Salary by Experience Chart

0-2 Years
19,360 EUR
2-5 Years +23%
24,280 EUR
5-10 Years +42%
31,980 EUR
10-15 Years +17%
36,720 EUR
15-20 Years +10%
43,360 EUR
20+ Years +6%
42,960 EUR

CNC Programmer Salary by Education Level in Åland Islands

As well as experience in a job, your education plays a big role in how much you can earn. A lot of higher paying positions require a high level of education, but how much can a degree increase your salary?

In our research we have compared the salaries of employees in the same job and career level with different levels of education to see how much more you can earn at each education level.

The salary you can earn based on your education is very specific to both your location and the career path you choose.

In our research, we looked at the average salary for an CNC Programmer in Åland Islands based on the education level of the employees in order to find out whether a better education level would increase your salary.

  • Certificate or Diploma. An CNC Programmer in Åland Islands with a certificate or diploma education can earn an average salary of 25,680 EUR.

  • Bachelor's Degree. An CNC Programmer in Åland Islands with a bachelor's degree education can earn an average salary of 36,020 EUR.

Average Salary by Education Chart

Certificate or Diploma
25,680 EUR
Bachelor's Degree +47%
36,020 EUR

How Much is a Master's Degree or MBA Program?

The approximate cost of a master's degree or post-graduate program like an MBA in Åland Islands is around 18,200 to 54,600 EUR and takes two years to complete.

As you can see above, there are financial benefits from reaching master's degree level, but don't expect to see much of a salary increase until you have completed the degree.

It's common for people to pursue an MBA or other post-graduate program in order to switch to a a job that pays more. On average, you can expect to earn around 10% more when switching to a new company.

Whether you decide to pursue a master's degree depends on many factors. If you are able to afford it, the numbers suggest that the return on investment is worth it and you could recover the costs in a few years from the salary increase you would receive.

CNC Programmer Salary Compared by Gender

In the modern age, we know that there should never be a pay gap between men and women. Unfortunately, in many professions, there is still a significant difference between the salaries earned by men when compared to the salary of women in the same job.

In Åland Islands, a male cnc programmer will earn an average of 31,040 EUR, while a female cnc programmer will earn around 26,860 EUR.

This means that a male cnc programmer earns approximately 16% more than a female cnc programmer for performing the same job.

Average Salary by Gender Chart in Åland Islands

Male
31,040 EUR
Female -16%
26,860 EUR

CNC Programmer Average Pay Raise in Åland Islands

In many countries, an annual pay raise is often given to employees to reward their service with a salary increase.

From our research, we can see that the average pay raise for an CNC Programmer in Åland Islands is around 6% every 29 months.

The national average pay raise across all professions and industries in Åland Islands is around 5% every 28 months.

In this case, we can see that the number of months between the average pay raise is higher than the typical 12 months.

To make the data more meaningful, we can calculate what the approximate annual pay raise would be using a simple formula:

Annual Increase = ( Increase Rate ÷ Months ) × 12

So for this example, it would be:

Annual Increase = ( 6 ÷ 29 ) × 12  = 2%

What this means is that an CNC Programmer in Åland Islands can expect to receive an average pay raise of around 2% every 12 months.

Annual Pay Raise by Industry in Åland Islands for 2024

In the chart below, you can see the average annual pay raise percentages for each of the major industries in Åland Islands.

You will see that companies in bigger and more lucrative industries tend to have the higher annual pay raises.

Banking
2%
Energy
4%
Information Technology
6%
Healthcare
8%
Travel
1%
Construction
3%
Education
5%

CNC Programmer Bonus and Incentive Rates in Åland Islands

Another part of your overall compensation in a job is how much bonus you receive. Some job roles will be more likely to pay a bonus than others and also more likely to have higher bonus rates.

Generally speaking, jobs that are more involved with direct revenue generation will receive higher bonuses based on the performance towards revenue goals.

An CNC Programmer is a low bonus based job, with 9% of employees reporting at least one bonus in the last 12 months.

91% reported that they had not received any bonuses in the previous 12 months.

For the employees that did receive a bonus in the previous 12 months, the reported bonuses ranged from 1% to 3%.

Received Bonus
9%
No Bonus
91%

What are the Types of Bonus?

There are a number of difference types of bonus you can receive in a job. Including:

  • Individual performance bonus - This is a bonus that is awarded to an individual employee for general performance in the job. It's the most common type of bonus.
  • Company performance bonus - This is a bonus that is awarded to a company employees to share profit with the staff.
  • Goal based bonus - This is a bonus that is awarded to an individual employee (or a team) for achieving specific goals, objectives, or milestones.
  • Holiday bonus - This type of bonus is usually paid around the holidays, often the end of the year, and is a token of appreciation for the hard work throughout the year.

Government vs Private Sector Salaries

Another commonly asked question is whether you get paid a higher salary working in the public (government) sector or the private sector.

Public sector employees in Åland Islands earn approximately 17% more than private sector employees in the same role.

Public Sector
47,120 EUR
Private Sector -17%
40,240 EUR

Salaries for Jobs Similar to an CNC Programmer

In the table below, we have salary information for jobs that are similar to an CNC Programmer in Åland Islands.

Job Title Category Salary
Assembly Foreman Factory and Manufacturing 12,120 EUR
Assembly Line Worker Factory and Manufacturing 13,540 EUR
Assembly Supervisor Factory and Manufacturing 19,020 EUR
Assistance Maintenance Manager Factory and Manufacturing 46,400 EUR
Assistant Shipping Manager Factory and Manufacturing 40,240 EUR
Chemical Equipment Controller Factory and Manufacturing 29,320 EUR
Chemical Technican Apprentice Factory and Manufacturing 25,940 EUR
CNC Machinist Factory and Manufacturing 27,480 EUR
CNC Operator Factory and Manufacturing 26,660 EUR
Colour Technologist Factory and Manufacturing 16,880 EUR
Contracts Manager Factory and Manufacturing 54,700 EUR
Data Collection Coordinator Factory and Manufacturing 20,460 EUR
Demand Planner Factory and Manufacturing 19,640 EUR
Derrick Operator Factory and Manufacturing 13,780 EUR
Director of Manufacturing Factory and Manufacturing 78,120 EUR
Dock Worker Factory and Manufacturing 12,520 EUR
Drying Technician Factory and Manufacturing 13,060 EUR
Equipment Operator Factory and Manufacturing 10,080 EUR
Export Sales Coordinator Factory and Manufacturing 40,240 EUR
Factory Superintendent Factory and Manufacturing 19,020 EUR
Factory Worker Factory and Manufacturing 12,240 EUR
Failure Analysis Technician Factory and Manufacturing 21,100 EUR
Fiberglass Laminator Factory and Manufacturing 12,000 EUR
Food Technologist Factory and Manufacturing 23,400 EUR
Forklift Driver Factory and Manufacturing 13,900 EUR
Forklift Operator Factory and Manufacturing 12,120 EUR
Forming Machine Operator Factory and Manufacturing 14,620 EUR
Furnace Operator Factory and Manufacturing 13,700 EUR
Gas Appliance Repairer Factory and Manufacturing 11,360 EUR
General Warehouse Associate Factory and Manufacturing 19,980 EUR
Heavy Equipment Operator Factory and Manufacturing 16,720 EUR
HSE Manager Factory and Manufacturing 51,120 EUR
Industrial Engineer Factory and Manufacturing 42,320 EUR
Industrial Machinery Mechanic Factory and Manufacturing 25,720 EUR
Industrial Production Manager Factory and Manufacturing 74,380 EUR
Industrial Safety and Health Engineer Factory and Manufacturing 41,180 EUR
Intake Operator Factory and Manufacturing 16,720 EUR
Key Account Manager Factory and Manufacturing 58,520 EUR
Lift Truck Operator Factory and Manufacturing 14,620 EUR
Loading Supervisor Factory and Manufacturing 22,420 EUR
Logistic Coordinator Factory and Manufacturing 35,560 EUR
Logistics Clerk Factory and Manufacturing 15,760 EUR
Machine Operator Factory and Manufacturing 11,360 EUR
Machinist Factory and Manufacturing 11,360 EUR
Maintenance Manager Factory and Manufacturing 47,400 EUR
Maintenance Store Clerk Factory and Manufacturing 13,560 EUR
Manufacturing Engineer Factory and Manufacturing 41,900 EUR
Manufacturing Engineering Manager Factory and Manufacturing 61,180 EUR
Manufacturing Engineering Technologist Factory and Manufacturing 45,580 EUR
Manufacturing Manager Factory and Manufacturing 70,700 EUR
Manufacturing Operative Factory and Manufacturing 21,020 EUR
Manufacturing Production Technician Factory and Manufacturing 14,140 EUR
Manufacturing Supervisor Factory and Manufacturing 36,160 EUR
Manufacturing Technician Factory and Manufacturing 14,840 EUR
Materials Manager Factory and Manufacturing 57,080 EUR
Materials Supervisor Factory and Manufacturing 38,140 EUR
Mechanical Fitter Engineer Factory and Manufacturing 41,480 EUR
Mechanical Foreman Factory and Manufacturing 13,780 EUR
Merchandise Planner Factory and Manufacturing 21,380 EUR
Metrology Engineer Factory and Manufacturing 39,560 EUR
Operations Engineer Factory and Manufacturing 36,020 EUR
Operations Manager Factory and Manufacturing 64,040 EUR
Order Management Coordinator Factory and Manufacturing 34,980 EUR
Order Processing Manager Factory and Manufacturing 53,840 EUR
Order Selector Factory and Manufacturing 13,100 EUR
Package Handler Factory and Manufacturing 13,660 EUR
Packaging Manager Factory and Manufacturing 45,200 EUR
Packer Factory and Manufacturing 10,980 EUR
Packing Deputy Supervisor Factory and Manufacturing 35,300 EUR
Planning Manager Factory and Manufacturing 57,860 EUR
Plant Manager Factory and Manufacturing 68,400 EUR
Precision Instrument Repairer Factory and Manufacturing 16,980 EUR
Process Technician Factory and Manufacturing 15,580 EUR
Product Manager Factory and Manufacturing 67,360 EUR
Production Analyst Factory and Manufacturing 55,840 EUR
Production Director Factory and Manufacturing 77,340 EUR
Production Engineer Factory and Manufacturing 43,340 EUR
Production Engineering Supervisor Factory and Manufacturing 62,460 EUR
Production Inspector Factory and Manufacturing 41,820 EUR
Production Laborer Factory and Manufacturing 10,000 EUR
Production Manager Factory and Manufacturing 75,100 EUR
Production Operator Factory and Manufacturing 19,200 EUR
Production Scheduler Factory and Manufacturing 33,120 EUR
Production Supervisor Factory and Manufacturing 40,640 EUR
Production Technician Factory and Manufacturing 19,200 EUR
Production Worker Factory and Manufacturing 17,620 EUR
Quality Control Analyst Factory and Manufacturing 54,700 EUR
Quality Control Inspector Factory and Manufacturing 45,580 EUR
Quality Control Manager Factory and Manufacturing 60,160 EUR
Service Technician Factory and Manufacturing 15,760 EUR
SHEQ Officer Factory and Manufacturing 18,940 EUR
Shipping Manager Factory and Manufacturing 64,040 EUR
Small Engine Mechanic Factory and Manufacturing 20,460 EUR
Spray Painter Factory and Manufacturing 13,700 EUR
Sterile Processing Technician Factory and Manufacturing 14,920 EUR
Structural Welder Factory and Manufacturing 10,080 EUR
Supply Chain Operative Factory and Manufacturing 33,980 EUR
Technical Operator Factory and Manufacturing 16,400 EUR
Technology Development Manager Factory and Manufacturing 68,320 EUR
Testing Technician Factory and Manufacturing 29,640 EUR
Toolmaker Factory and Manufacturing 20,940 EUR
Warehouse Forklift Operator Factory and Manufacturing 12,000 EUR
Warehouse Operative Factory and Manufacturing 12,620 EUR
Warehouse Worker Factory and Manufacturing 12,240 EUR
Warranty Handler Factory and Manufacturing 22,400 EUR
Welder Factory and Manufacturing 13,780 EUR
Workshop Manager Factory and Manufacturing 45,580 EUR

Link To or Reference This Page

We spend a lot of time collecting, cleaning, merging, and formatting the data that is shown on the site to be as useful to you as possible.

If you found the data or information on this page useful in your research, please use the tool below to properly cite or reference World Salaries as the source. We appreciate your support!

  • "Average CNC Programmer Salary in Åland Islands for 2024". World Salaries. Accessed on March 28, 2024. https://worldsalaries.com/average-cnc-programmer-salary-in-aland-islands/.

  • "Average CNC Programmer Salary in Åland Islands for 2024". World Salaries, https://worldsalaries.com/average-cnc-programmer-salary-in-aland-islands/. Accessed 28 March, 2024

  • Average CNC Programmer Salary in Åland Islands for 2024. World Salaries. Retrieved from https://worldsalaries.com/average-cnc-programmer-salary-in-aland-islands/.