Average CAD Drafter Salary in Bangladesh for 2024

In this article, we will look at the average CAD Drafter salary for 2024 in Bangladesh and how that compares to other countries and professions. We'll also look at interesting salary data points like median salary, 25th and 75th percentile salaries, salary amounts based on experience, bonus ranges and more!

The data in this article has been compiled using official government salary data, salary surveys, and other sources such as job postings which contain salary information.

All salary information is in the local currency, which is the Bangladeshi taka. To keep things simple, we are using the BDT currency code instead of the currency symbol ৳.

How Much Does a CAD Drafter Make in Bangladesh?

A CAD Drafter working in Bangladesh will typically earn around 159,100 BDT per year, and this can range from the lowest average salary of about 74,540 BDT to the highest average salary of 253,400 BDT.

Average Annual Salary
159,100 BDT
Average Monthly Salary
13,258 BDT

Lowest Annual Salary
74,540 BDT
Lowest Monthly Salary
6,211 BDT

Highest Annual Salary
253,400 BDT
Highest Monthly Salary
21,116 BDT

These are average salaries for a CAD Drafter in Bangladesh and include benefits such as housing and transport. It's also possible for a CAD Drafter to earn more or less than the average salaries shown above.

CAD Drafter salaries will vary a lot based on your experience, location, skills, and gender. Keep reading below to research more data on each of these areas.

Distribution of CAD Drafter Salaries in Bangladesh

So we've looked at the average salaries a CAD Drafter will earn in Bangladesh. The next interesting data point is the distribution of salaries.

Salary ranges

We already know that a CAD Drafter can earn between 74,540 BDT and 253,400 BDT on average in Bangladesh. This is known as the range in statistics.

The difference between the maximum and minimum values is a good indicator of variability in salaries, and can be used by employers to figure out how much they can expect to pay, and for employees to know how much they can earn.

Median salary

The median salary for a CAD Drafter in Bangladesh is 172,200 BDT. This is the middle value in the distribution of salaries.

What this means is that approximately 50% of the population earn less than 172,200 BDT, and 50% of the population earn more than 172,200 BDT.

If you are earning more than the median salary, that's a good indicator that you are being paid well.

If you're not earning more than the median salary, your objective should be to increase your earnings to be at least as high as the median salary (which you can do by asking for a pay rise, looking for a better paying job, etc).

Percentiles

Percentiles are similar to the median salary, but instead of looking at the middle value, they look at the values in the top and bottom half of the distribution.

For the average CAD Drafter salary in Bangladesh, 25% of the population are earning less than 107,880 BDT while 75% of the population earn more than 107,880 BDT.

75% of the population earn less than 227,600 BDT, and 25% of the population earn more than 227,600 BDT.

Like the median salary, the 25th and 75th percentile salaries can be used to determine which quartile you fall into so that you know whether you are being paid well enough compared to others in your profession and location.

The difference between a median and an average salary

The median and average salary are both indicators you can use to see if you are being paid fairly based on the overall population.

  • If your salary is higher than the average and the median salary, you are earning well compared to others.
  • If your salary is lower than the average and the median salary, it could indicate you are not being paid well enough.
  • If you are somewhere in between then it's tricky to determine if you are being paid well enough and you might need to research more closely.

CAD Drafter Salary by Experience Level in Bangladesh

The most important factor in determining your salary after the specific profession is the number of years experience you have. It stands to reason that more years of experience will result in a higher wage.

We have researched the average cad drafter salary based on years of experience to give you an idea of how the average changes once you've worked for a certain amount of time.

  • 0 - 2 Years Experience. A CAD Drafter in Bangladesh that has less than two years of experience can expect to earn somewhere in the region of 81,180 BDT.
  • 2 - 5 Years Experience. With two to five years of experience the average CAD Drafter salary would increase to 111,900 BDT.
  • 5 - 10 Years Experience. From five to ten years of experience as a CAD Drafter, the average salary would be 161,600 BDT.
  • 10 - 15 Years Experience. Once you have more than ten years of experience the average salary reaches around 197,600 BDT.
  • 15 - 20 Years Experience. A CAD Drafter with 15 to 20 years of experience can earn an average of 216,800 BDT.
  • 20+ Years Experience. For a CAD Drafter with more than 20 years, the expected average salary increases to 233,900 BDT.

Average Salary by Experience Chart

0-2 Years
81,180 BDT
2-5 Years +34%
111,900 BDT
5-10 Years +48%
161,600 BDT
10-15 Years +22%
197,600 BDT
15-20 Years +9%
216,800 BDT
20+ Years +8%
233,900 BDT

CAD Drafter Salary by Education Level in Bangladesh

As well as experience in a job, your education plays a big role in how much you can earn. A lot of higher paying positions require a high level of education, but how much can a degree increase your salary?

In our research we have compared the salaries of employees in the same job and career level with different levels of education to see how much more you can earn at each education level.

The salary you can earn based on your education is very specific to both your location and the career path you choose.

In our research, we looked at the average salary for a CAD Drafter in Bangladesh based on the education level of the employees in order to find out whether a better education level would increase your salary.

  • Certificate or Diploma. A CAD Drafter in Bangladesh with a certificate or diploma education can earn an average salary of 95,420 BDT.

  • Bachelor's Degree. A CAD Drafter in Bangladesh with a bachelor's degree education can earn an average salary of 187,500 BDT.

Average Salary by Education Chart

Certificate or Diploma
95,420 BDT
Bachelor's Degree +93%
187,500 BDT

How Much is a Master's Degree or MBA Program?

The approximate cost of a master's degree or post-graduate program like an MBA in Bangladesh is around 130,000 to 390,000 BDT and takes two years to complete.

As you can see above, there are financial benefits from reaching master's degree level, but don't expect to see much of a salary increase until you have completed the degree.

It's common for people to pursue an MBA or other post-graduate program in order to switch to a a job that pays more. On average, you can expect to earn around 10% more when switching to a new company.

Whether you decide to pursue a master's degree depends on many factors. If you are able to afford it, the numbers suggest that the return on investment is worth it and you could recover the costs in a few years from the salary increase you would receive.

CAD Drafter Salary Compared by Gender

In the modern age, we know that there should never be a pay gap between men and women. Unfortunately, in many professions, there is still a significant difference between the salaries earned by men when compared to the salary of women in the same job.

In Bangladesh, a male cad drafter will earn an average of 172,200 BDT, while a female cad drafter will earn around 143,200 BDT.

This means that a male cad drafter earns approximately 20% more than a female cad drafter for performing the same job.

Average Salary by Gender Chart in Bangladesh

Male
172,200 BDT
Female -20%
143,200 BDT

CAD Drafter Average Pay Raise in Bangladesh

In many countries, an annual pay raise is often given to employees to reward their service with a salary increase.

From our research, we can see that the average pay raise for a CAD Drafter in Bangladesh is around 7% every 28 months.

The national average pay raise across all professions and industries in Bangladesh is around 5% every 28 months.

In this case, we can see that the number of months between the average pay raise is higher than the typical 12 months.

To make the data more meaningful, we can calculate what the approximate annual pay raise would be using a simple formula:

Annual Increase = ( Increase Rate ÷ Months ) × 12

So for this example, it would be:

Annual Increase = ( 7 ÷ 28 ) × 12  = 3%

What this means is that a CAD Drafter in Bangladesh can expect to receive an average pay raise of around 3% every 12 months.

Annual Pay Raise by Industry in Bangladesh for 2024

In the chart below, you can see the average annual pay raise percentages for each of the major industries in Bangladesh.

You will see that companies in bigger and more lucrative industries tend to have the higher annual pay raises.

Banking
9%
Energy
9%
Information Technology
9%
Healthcare
9%
Travel
9%
Construction
9%
Education
9%

CAD Drafter Bonus and Incentive Rates in Bangladesh

Another part of your overall compensation in a job is how much bonus you receive. Some job roles will be more likely to pay a bonus than others and also more likely to have higher bonus rates.

Generally speaking, jobs that are more involved with direct revenue generation will receive higher bonuses based on the performance towards revenue goals.

A CAD Drafter is a low bonus based job, with 15% of employees reporting at least one bonus in the last 12 months.

85% reported that they had not received any bonuses in the previous 12 months.

For the employees that did receive a bonus in the previous 12 months, the reported bonuses ranged from 0% to 4%.

Received Bonus
15%
No Bonus
85%

What are the Types of Bonus?

There are a number of difference types of bonus you can receive in a job. Including:

  • Individual performance bonus - This is a bonus that is awarded to an individual employee for general performance in the job. It's the most common type of bonus.
  • Company performance bonus - This is a bonus that is awarded to a company employees to share profit with the staff.
  • Goal based bonus - This is a bonus that is awarded to an individual employee (or a team) for achieving specific goals, objectives, or milestones.
  • Holiday bonus - This type of bonus is usually paid around the holidays, often the end of the year, and is a token of appreciation for the hard work throughout the year.

Government vs Private Sector Salaries

Another commonly asked question is whether you get paid a higher salary working in the public (government) sector or the private sector.

Public sector employees in Bangladesh earn approximately 25% more than private sector employees in the same role.

Public Sector
345,700 BDT
Private Sector -25%
277,400 BDT

Salaries for Jobs Similar to a CAD Drafter

In the table below, we have salary information for jobs that are similar to a CAD Drafter in Bangladesh.

Job Title Category Salary
Architect Architecture 384,200 BDT
Architectural Designer Architecture 369,300 BDT
Architectural Drafter Architecture 159,100 BDT
Architectural Manager Architecture 548,500 BDT
Architectural Technician Architecture 208,600 BDT
Architectural Technologist Architecture 207,800 BDT
Architecture Consultant Architecture 552,400 BDT
Architecture Estimating Manager Architecture 451,000 BDT
Architecture Specifications Writer Architecture 148,300 BDT
Assistant Architectural Manager Architecture 548,800 BDT
CAD Manager Architecture 362,200 BDT
Design and Decoration Assistant Architecture 159,500 BDT
Design Manager Architecture 514,300 BDT
Drafter Architecture 151,800 BDT
Drafting Supervisor Architecture 283,700 BDT
Facilities and Project Manager Architecture 504,500 BDT
Facility Planner Architecture 283,400 BDT
Interior Architect Architecture 325,600 BDT
Interior Decorator Architecture 275,500 BDT
Interior Design Assistant Architecture 143,200 BDT
Interior Designer Architecture 312,400 BDT
Kitchen Designer Architecture 196,800 BDT
Landscape Architect Architecture 453,200 BDT
Landscape Artist Architecture 258,400 BDT
Landscaper Architecture 228,500 BDT
Mapping Technician Architecture 143,200 BDT
Mechanical Drafter Architecture 189,300 BDT
Photogrammetrist Architecture 161,600 BDT

Salary Comparison by City

If you want to compare salaries with different cities in Bangladesh, you can use the links below to explore the data for each specific city we have researched.

City Average Salary
Barisal 159,400 BDT
Bogra 168,100 BDT
Chandpur 142,300 BDT
Chittagong 172,200 BDT
Coxs Bazar 150,000 BDT
Dhaka 181,600 BDT
Jamalpur 143,200 BDT
Jessore 159,500 BDT
Khulna 176,800 BDT
Rajshahi 176,800 BDT
St. Martin 139,100 BDT
Sylhet 163,800 BDT

Link To or Reference This Page

We spend a lot of time collecting, cleaning, merging, and formatting the data that is shown on the site to be as useful to you as possible.

If you found the data or information on this page useful in your research, please use the tool below to properly cite or reference World Salaries as the source. We appreciate your support!

  • "Average CAD Drafter Salary in Bangladesh for 2024". World Salaries. Accessed on March 29, 2024. https://worldsalaries.com/average-cad-drafter-salary-in-bangladesh/.

  • "Average CAD Drafter Salary in Bangladesh for 2024". World Salaries, https://worldsalaries.com/average-cad-drafter-salary-in-bangladesh/. Accessed 29 March, 2024

  • Average CAD Drafter Salary in Bangladesh for 2024. World Salaries. Retrieved from https://worldsalaries.com/average-cad-drafter-salary-in-bangladesh/.