Average Mechanical Drafter Salary in Qatar for 2024

In this article, we will look at the average Mechanical Drafter salary for 2024 in Qatar and how that compares to other countries and professions. We'll also look at interesting salary data points like median salary, 25th and 75th percentile salaries, salary amounts based on experience, bonus ranges and more!

The data in this article has been compiled using official government salary data, salary surveys, and other sources such as job postings which contain salary information.

All salary information is in the local currency, which is the Qatari riyal. To keep things simple, we are using the QAR currency code instead of the currency symbol ุฑ.ู‚.

How Much Does a Mechanical Drafter Make in Qatar?

A Mechanical Drafter working in Qatar will typically earn around 100,140 QAR per year, and this can range from the lowest average salary of about 48,340 QAR to the highest average salary of 159,500 QAR.

Average Annual Salary
100,140 QAR
Average Monthly Salary
8,345 QAR

Lowest Annual Salary
48,340 QAR
Lowest Monthly Salary
4,028 QAR

Highest Annual Salary
159,500 QAR
Highest Monthly Salary
13,291 QAR

These are average salaries for a Mechanical Drafter in Qatar and include benefits such as housing and transport. It's also possible for a Mechanical Drafter to earn more or less than the average salaries shown above.

Mechanical Drafter salaries will vary a lot based on your experience, location, skills, and gender. Keep reading below to research more data on each of these areas.

Distribution of Mechanical Drafter Salaries in Qatar

So we've looked at the average salaries a Mechanical Drafter will earn in Qatar. The next interesting data point is the distribution of salaries.

Salary ranges

We already know that a Mechanical Drafter can earn between 48,340 QAR and 159,500 QAR on average in Qatar. This is known as the range in statistics.

The difference between the maximum and minimum values is a good indicator of variability in salaries, and can be used by employers to figure out how much they can expect to pay, and for employees to know how much they can earn.

Median salary

The median salary for a Mechanical Drafter in Qatar is 108,080 QAR. This is the middle value in the distribution of salaries.

What this means is that approximately 50% of the population earn less than 108,080 QAR, and 50% of the population earn more than 108,080 QAR.

If you are earning more than the median salary, that's a good indicator that you are being paid well.

If you're not earning more than the median salary, your objective should be to increase your earnings to be at least as high as the median salary (which you can do by asking for a pay rise, looking for a better paying job, etc).

Percentiles

Percentiles are similar to the median salary, but instead of looking at the middle value, they look at the values in the top and bottom half of the distribution.

For the average Mechanical Drafter salary in Qatar, 25% of the population are earning less than 69,060 QAR while 75% of the population earn more than 69,060 QAR.

75% of the population earn less than 146,200 QAR, and 25% of the population earn more than 146,200 QAR.

Like the median salary, the 25th and 75th percentile salaries can be used to determine which quartile you fall into so that you know whether you are being paid well enough compared to others in your profession and location.

The difference between a median and an average salary

The median and average salary are both indicators you can use to see if you are being paid fairly based on the overall population.

  • If your salary is higher than the average and the median salary, you are earning well compared to others.
  • If your salary is lower than the average and the median salary, it could indicate you are not being paid well enough.
  • If you are somewhere in between then it's tricky to determine if you are being paid well enough and you might need to research more closely.

Mechanical Drafter Salary by Experience Level in Qatar

The most important factor in determining your salary after the specific profession is the number of years experience you have. It stands to reason that more years of experience will result in a higher wage.

We have researched the average mechanical drafter salary based on years of experience to give you an idea of how the average changes once you've worked for a certain amount of time.

  • 0 - 2 Years Experience. A Mechanical Drafter in Qatar that has less than two years of experience can expect to earn somewhere in the region of 52,380 QAR.
  • 2 - 5 Years Experience. With two to five years of experience the average Mechanical Drafter salary would increase to 69,040 QAR.
  • 5 - 10 Years Experience. From five to ten years of experience as a Mechanical Drafter, the average salary would be 103,440 QAR.
  • 10 - 15 Years Experience. Once you have more than ten years of experience the average salary reaches around 125,700 QAR.
  • 15 - 20 Years Experience. A Mechanical Drafter with 15 to 20 years of experience can earn an average of 139,100 QAR.
  • 20+ Years Experience. For a Mechanical Drafter with more than 20 years, the expected average salary increases to 151,800 QAR.

Average Salary by Experience Chart

0-2 Years
52,380 QAR
2-5 Years +34%
69,040 QAR
5-10 Years +48%
103,440 QAR
10-15 Years +22%
125,700 QAR
15-20 Years +9%
139,100 QAR
20+ Years +8%
151,800 QAR

Mechanical Drafter Salary by Education Level in Qatar

As well as experience in a job, your education plays a big role in how much you can earn. A lot of higher paying positions require a high level of education, but how much can a degree increase your salary?

In our research we have compared the salaries of employees in the same job and career level with different levels of education to see how much more you can earn at each education level.

The salary you can earn based on your education is very specific to both your location and the career path you choose.

In our research, we looked at the average salary for a Mechanical Drafter in Qatar based on the education level of the employees in order to find out whether a better education level would increase your salary.

  • Certificate or Diploma. A Mechanical Drafter in Qatar with a certificate or diploma education can earn an average salary of 60,920 QAR.

  • Bachelor's Degree. A Mechanical Drafter in Qatar with a bachelor's degree education can earn an average salary of 117,520 QAR.

Average Salary by Education Chart

Certificate or Diploma
60,920 QAR
Bachelor's Degree +93%
117,520 QAR

How Much is a Master's Degree or MBA Program?

The approximate cost of a master's degree or post-graduate program like an MBA in Qatar is around 78,400 to 235,000 QAR and takes two years to complete.

As you can see above, there are financial benefits from reaching master's degree level, but don't expect to see much of a salary increase until you have completed the degree.

It's common for people to pursue an MBA or other post-graduate program in order to switch to a a job that pays more. On average, you can expect to earn around 10% more when switching to a new company.

Whether you decide to pursue a master's degree depends on many factors. If you are able to afford it, the numbers suggest that the return on investment is worth it and you could recover the costs in a few years from the salary increase you would receive.

Mechanical Drafter Salary Compared by Gender

In the modern age, we know that there should never be a pay gap between men and women. Unfortunately, in many professions, there is still a significant difference between the salaries earned by men when compared to the salary of women in the same job.

In Qatar, a male mechanical drafter will earn an average of 107,820 QAR, while a female mechanical drafter will earn around 96,540 QAR.

This means that a male mechanical drafter earns approximately 12% more than a female mechanical drafter for performing the same job.

Average Salary by Gender Chart in Qatar

Male
107,820 QAR
Female -12%
96,540 QAR

Mechanical Drafter Average Pay Raise in Qatar

In many countries, an annual pay raise is often given to employees to reward their service with a salary increase.

From our research, we can see that the average pay raise for a Mechanical Drafter in Qatar is around 11% every 16 months.

The national average pay raise across all professions and industries in Qatar is around 9% every 16 months.

In this case, we can see that the number of months between the average pay raise is higher than the typical 12 months.

To make the data more meaningful, we can calculate what the approximate annual pay raise would be using a simple formula:

Annual Increase = ( Increase Rate ÷ Months ) × 12

So for this example, it would be:

Annual Increase = ( 11 ÷ 16 ) × 12  = 8%

What this means is that a Mechanical Drafter in Qatar can expect to receive an average pay raise of around 8% every 12 months.

Annual Pay Raise by Industry in Qatar for 2024

In the chart below, you can see the average annual pay raise percentages for each of the major industries in Qatar.

You will see that companies in bigger and more lucrative industries tend to have the higher annual pay raises.

Banking
5%
Energy
1%
Information Technology
6%
Healthcare
2%
Travel
7%
Construction
3%
Education
8%

Mechanical Drafter Bonus and Incentive Rates in Qatar

Another part of your overall compensation in a job is how much bonus you receive. Some job roles will be more likely to pay a bonus than others and also more likely to have higher bonus rates.

Generally speaking, jobs that are more involved with direct revenue generation will receive higher bonuses based on the performance towards revenue goals.

A Mechanical Drafter is a low bonus based job, with 33% of employees reporting at least one bonus in the last 12 months.

67% reported that they had not received any bonuses in the previous 12 months.

For the employees that did receive a bonus in the previous 12 months, the reported bonuses ranged from 0% to 4%.

Received Bonus
33%
No Bonus
67%

What are the Types of Bonus?

There are a number of difference types of bonus you can receive in a job. Including:

  • Individual performance bonus - This is a bonus that is awarded to an individual employee for general performance in the job. It's the most common type of bonus.
  • Company performance bonus - This is a bonus that is awarded to a company employees to share profit with the staff.
  • Goal based bonus - This is a bonus that is awarded to an individual employee (or a team) for achieving specific goals, objectives, or milestones.
  • Holiday bonus - This type of bonus is usually paid around the holidays, often the end of the year, and is a token of appreciation for the hard work throughout the year.

Government vs Private Sector Salaries

Another commonly asked question is whether you get paid a higher salary working in the public (government) sector or the private sector.

Public sector employees in Qatar earn approximately 5% more than private sector employees in the same role.

Public Sector
192,600 QAR
Private Sector -5%
183,700 QAR

Salaries for Jobs Similar to a Mechanical Drafter

In the table below, we have salary information for jobs that are similar to a Mechanical Drafter in Qatar.

Job Title Category Salary
Architect Architecture 214,000 QAR
Architectural Designer Architecture 197,600 QAR
Architectural Drafter Architecture 92,300 QAR
Architectural Manager Architecture 332,500 QAR
Architectural Technician Architecture 118,380 QAR
Architectural Technologist Architecture 125,100 QAR
Architecture Consultant Architecture 299,500 QAR
Architecture Estimating Manager Architecture 243,000 QAR
Architecture Specifications Writer Architecture 83,420 QAR
Assistant Architectural Manager Architecture 299,500 QAR
CAD Drafter Architecture 92,900 QAR
CAD Manager Architecture 207,700 QAR
Design and Decoration Assistant Architecture 87,940 QAR
Design Manager Architecture 301,700 QAR
Drafter Architecture 88,580 QAR
Drafting Supervisor Architecture 159,500 QAR
Facilities and Project Manager Architecture 292,000 QAR
Facility Planner Architecture 172,200 QAR
Interior Architect Architecture 172,200 QAR
Interior Decorator Architecture 169,000 QAR
Interior Design Assistant Architecture 80,180 QAR
Interior Designer Architecture 181,600 QAR
Kitchen Designer Architecture 112,560 QAR
Landscape Architect Architecture 252,300 QAR
Landscape Artist Architecture 146,200 QAR
Landscaper Architecture 125,100 QAR
Mapping Technician Architecture 80,180 QAR
Photogrammetrist Architecture 92,240 QAR

Salary Comparison by City

If you want to compare salaries with different cities in Qatar, you can use the links below to explore the data for each specific city we have researched.

City Average Salary
Doha 115,600 QAR

Link To or Reference This Page

We spend a lot of time collecting, cleaning, merging, and formatting the data that is shown on the site to be as useful to you as possible.

If you found the data or information on this page useful in your research, please use the tool below to properly cite or reference World Salaries as the source. We appreciate your support!

  • "Average Mechanical Drafter Salary in Qatar for 2024". World Salaries. Accessed on March 28, 2024. https://worldsalaries.com/average-mechanical-drafter-salary-in-qatar/.

  • "Average Mechanical Drafter Salary in Qatar for 2024". World Salaries, https://worldsalaries.com/average-mechanical-drafter-salary-in-qatar/. Accessed 28 March, 2024

  • Average Mechanical Drafter Salary in Qatar for 2024. World Salaries. Retrieved from https://worldsalaries.com/average-mechanical-drafter-salary-in-qatar/.