Average CNC Machinist Salary in Chile for 2024

In this article, we will look at the average CNC Machinist salary for 2024 in Chile and how that compares to other countries and professions. We'll also look at interesting salary data points like median salary, 25th and 75th percentile salaries, salary amounts based on experience, bonus ranges and more!

The data in this article has been compiled using official government salary data, salary surveys, and other sources such as job postings which contain salary information.

All salary information is in the local currency, which is the Chilean peso. To keep things simple, we are using the CLP currency code instead of the currency symbol $.

How Much Does an CNC Machinist Make in Chile?

An CNC Machinist working in Chile will typically earn around 13,679,300 CLP per year, and this can range from the lowest average salary of about 7,236,200 CLP to the highest average salary of 20,760,500 CLP.

Average Annual Salary
13,679,300 CLP
Average Monthly Salary
1,139,941 CLP

Lowest Annual Salary
7,236,200 CLP
Lowest Monthly Salary
603,016 CLP

Highest Annual Salary
20,760,500 CLP
Highest Monthly Salary
1,730,041 CLP

These are average salaries for an CNC Machinist in Chile and include benefits such as housing and transport. It's also possible for an CNC Machinist to earn more or less than the average salaries shown above.

CNC Machinist salaries will vary a lot based on your experience, location, skills, and gender. Keep reading below to research more data on each of these areas.

Distribution of CNC Machinist Salaries in Chile

So we've looked at the average salaries an CNC Machinist will earn in Chile. The next interesting data point is the distribution of salaries.

Salary ranges

We already know that an CNC Machinist can earn between 7,236,200 CLP and 20,760,500 CLP on average in Chile. This is known as the range in statistics.

The difference between the maximum and minimum values is a good indicator of variability in salaries, and can be used by employers to figure out how much they can expect to pay, and for employees to know how much they can earn.

Median salary

The median salary for an CNC Machinist in Chile is 12,841,200 CLP. This is the middle value in the distribution of salaries.

What this means is that approximately 50% of the population earn less than 12,841,200 CLP, and 50% of the population earn more than 12,841,200 CLP.

If you are earning more than the median salary, that's a good indicator that you are being paid well.

If you're not earning more than the median salary, your objective should be to increase your earnings to be at least as high as the median salary (which you can do by asking for a pay rise, looking for a better paying job, etc).

Percentiles

Percentiles are similar to the median salary, but instead of looking at the middle value, they look at the values in the top and bottom half of the distribution.

For the average CNC Machinist salary in Chile, 25% of the population are earning less than 9,036,900 CLP while 75% of the population earn more than 9,036,900 CLP.

75% of the population earn less than 15,838,200 CLP, and 25% of the population earn more than 15,838,200 CLP.

Like the median salary, the 25th and 75th percentile salaries can be used to determine which quartile you fall into so that you know whether you are being paid well enough compared to others in your profession and location.

The difference between a median and an average salary

The median and average salary are both indicators you can use to see if you are being paid fairly based on the overall population.

  • If your salary is higher than the average and the median salary, you are earning well compared to others.
  • If your salary is lower than the average and the median salary, it could indicate you are not being paid well enough.
  • If you are somewhere in between then it's tricky to determine if you are being paid well enough and you might need to research more closely.

CNC Machinist Salary by Experience Level in Chile

The most important factor in determining your salary after the specific profession is the number of years experience you have. It stands to reason that more years of experience will result in a higher wage.

We have researched the average cnc machinist salary based on years of experience to give you an idea of how the average changes once you've worked for a certain amount of time.

  • 0 - 2 Years Experience. An CNC Machinist in Chile that has less than two years of experience can expect to earn somewhere in the region of 8,316,900 CLP.
  • 2 - 5 Years Experience. With two to five years of experience the average CNC Machinist salary would increase to 10,212,200 CLP.
  • 5 - 10 Years Experience. From five to ten years of experience as an CNC Machinist, the average salary would be 14,519,400 CLP.
  • 10 - 15 Years Experience. Once you have more than ten years of experience the average salary reaches around 16,918,700 CLP.
  • 15 - 20 Years Experience. An CNC Machinist with 15 to 20 years of experience can earn an average of 18,598,500 CLP.
  • 20+ Years Experience. For an CNC Machinist with more than 20 years, the expected average salary increases to 19,678,200 CLP.

Average Salary by Experience Chart

0-2 Years
8,316,900 CLP
2-5 Years +23%
10,212,200 CLP
5-10 Years +42%
14,519,400 CLP
10-15 Years +17%
16,918,700 CLP
15-20 Years +10%
18,598,500 CLP
20+ Years +6%
19,678,200 CLP

CNC Machinist Salary by Education Level in Chile

As well as experience in a job, your education plays a big role in how much you can earn. A lot of higher paying positions require a high level of education, but how much can a degree increase your salary?

In our research we have compared the salaries of employees in the same job and career level with different levels of education to see how much more you can earn at each education level.

The salary you can earn based on your education is very specific to both your location and the career path you choose.

In our research, we looked at the average salary for an CNC Machinist in Chile based on the education level of the employees in order to find out whether a better education level would increase your salary.

  • Certificate or Diploma. An CNC Machinist in Chile with a certificate or diploma education can earn an average salary of 11,028,500 CLP.

  • Bachelor's Degree. An CNC Machinist in Chile with a bachelor's degree education can earn an average salary of 16,198,300 CLP.

Average Salary by Education Chart

Certificate or Diploma
11,028,500 CLP
Bachelor's Degree +47%
16,198,300 CLP

How Much is a Master's Degree or MBA Program?

The approximate cost of a master's degree or post-graduate program like an MBA in Chile is around 9,340,000 to 28,000,000 CLP and takes two years to complete.

As you can see above, there are financial benefits from reaching master's degree level, but don't expect to see much of a salary increase until you have completed the degree.

It's common for people to pursue an MBA or other post-graduate program in order to switch to a a job that pays more. On average, you can expect to earn around 10% more when switching to a new company.

Whether you decide to pursue a master's degree depends on many factors. If you are able to afford it, the numbers suggest that the return on investment is worth it and you could recover the costs in a few years from the salary increase you would receive.

CNC Machinist Salary Compared by Gender

In the modern age, we know that there should never be a pay gap between men and women. Unfortunately, in many professions, there is still a significant difference between the salaries earned by men when compared to the salary of women in the same job.

In Chile, a male cnc machinist will earn an average of 14,158,800 CLP, while a female cnc machinist will earn around 13,079,500 CLP.

This means that a male cnc machinist earns approximately 8% more than a female cnc machinist for performing the same job.

Average Salary by Gender Chart in Chile

Male
14,158,800 CLP
Female -8%
13,079,500 CLP

CNC Machinist Average Pay Raise in Chile

In many countries, an annual pay raise is often given to employees to reward their service with a salary increase.

From our research, we can see that the average pay raise for an CNC Machinist in Chile is around 8% every 20 months.

The national average pay raise across all professions and industries in Chile is around 7% every 19 months.

In this case, we can see that the number of months between the average pay raise is higher than the typical 12 months.

To make the data more meaningful, we can calculate what the approximate annual pay raise would be using a simple formula:

Annual Increase = ( Increase Rate ÷ Months ) × 12

So for this example, it would be:

Annual Increase = ( 8 ÷ 20 ) × 12  = 5%

What this means is that an CNC Machinist in Chile can expect to receive an average pay raise of around 5% every 12 months.

Annual Pay Raise by Industry in Chile for 2024

In the chart below, you can see the average annual pay raise percentages for each of the major industries in Chile.

You will see that companies in bigger and more lucrative industries tend to have the higher annual pay raises.

Banking
7%
Energy
5%
Information Technology
3%
Healthcare
1%
Travel
8%
Construction
6%
Education
4%

CNC Machinist Bonus and Incentive Rates in Chile

Another part of your overall compensation in a job is how much bonus you receive. Some job roles will be more likely to pay a bonus than others and also more likely to have higher bonus rates.

Generally speaking, jobs that are more involved with direct revenue generation will receive higher bonuses based on the performance towards revenue goals.

An CNC Machinist is a low bonus based job, with 24% of employees reporting at least one bonus in the last 12 months.

76% reported that they had not received any bonuses in the previous 12 months.

For the employees that did receive a bonus in the previous 12 months, the reported bonuses ranged from 1% to 3%.

Received Bonus
24%
No Bonus
76%

What are the Types of Bonus?

There are a number of difference types of bonus you can receive in a job. Including:

  • Individual performance bonus - This is a bonus that is awarded to an individual employee for general performance in the job. It's the most common type of bonus.
  • Company performance bonus - This is a bonus that is awarded to a company employees to share profit with the staff.
  • Goal based bonus - This is a bonus that is awarded to an individual employee (or a team) for achieving specific goals, objectives, or milestones.
  • Holiday bonus - This type of bonus is usually paid around the holidays, often the end of the year, and is a token of appreciation for the hard work throughout the year.

Government vs Private Sector Salaries

Another commonly asked question is whether you get paid a higher salary working in the public (government) sector or the private sector.

Public sector employees in Chile earn approximately 7% more than private sector employees in the same role.

Public Sector
23,399,000 CLP
Private Sector -7%
21,841,900 CLP

Salaries for Jobs Similar to an CNC Machinist

In the table below, we have salary information for jobs that are similar to an CNC Machinist in Chile.

Job Title Category Salary
Assembly Foreman Factory and Manufacturing 6,505,500 CLP
Assembly Line Worker Factory and Manufacturing 5,914,900 CLP
Assembly Supervisor Factory and Manufacturing 9,311,400 CLP
Assistance Maintenance Manager Factory and Manufacturing 23,520,800 CLP
Assistant Shipping Manager Factory and Manufacturing 19,439,300 CLP
Chemical Equipment Controller Factory and Manufacturing 14,400,800 CLP
Chemical Technican Apprentice Factory and Manufacturing 11,953,700 CLP
CNC Operator Factory and Manufacturing 13,561,900 CLP
CNC Programmer Factory and Manufacturing 15,599,800 CLP
Colour Technologist Factory and Manufacturing 7,548,300 CLP
Contracts Manager Factory and Manufacturing 25,801,200 CLP
Data Collection Coordinator Factory and Manufacturing 10,932,200 CLP
Demand Planner Factory and Manufacturing 8,926,700 CLP
Derrick Operator Factory and Manufacturing 6,682,700 CLP
Director of Manufacturing Factory and Manufacturing 38,158,300 CLP
Dock Worker Factory and Manufacturing 6,142,600 CLP
Drying Technician Factory and Manufacturing 6,156,100 CLP
Equipment Operator Factory and Manufacturing 5,555,200 CLP
Export Sales Coordinator Factory and Manufacturing 18,479,600 CLP
Factory Superintendent Factory and Manufacturing 9,276,800 CLP
Factory Worker Factory and Manufacturing 6,804,900 CLP
Failure Analysis Technician Factory and Manufacturing 9,311,400 CLP
Fiberglass Laminator Factory and Manufacturing 6,457,900 CLP
Food Technologist Factory and Manufacturing 11,184,400 CLP
Forklift Driver Factory and Manufacturing 6,420,700 CLP
Forklift Operator Factory and Manufacturing 6,216,700 CLP
Forming Machine Operator Factory and Manufacturing 6,442,400 CLP
Furnace Operator Factory and Manufacturing 6,142,600 CLP
Gas Appliance Repairer Factory and Manufacturing 6,505,500 CLP
General Warehouse Associate Factory and Manufacturing 10,775,000 CLP
Heavy Equipment Operator Factory and Manufacturing 8,508,800 CLP
HSE Manager Factory and Manufacturing 26,399,200 CLP
Industrial Engineer Factory and Manufacturing 21,121,400 CLP
Industrial Machinery Mechanic Factory and Manufacturing 12,721,300 CLP
Industrial Production Manager Factory and Manufacturing 37,800,500 CLP
Industrial Safety and Health Engineer Factory and Manufacturing 19,558,300 CLP
Intake Operator Factory and Manufacturing 8,554,100 CLP
Key Account Manager Factory and Manufacturing 30,721,900 CLP
Lift Truck Operator Factory and Manufacturing 6,648,800 CLP
Loading Supervisor Factory and Manufacturing 11,377,500 CLP
Logistic Coordinator Factory and Manufacturing 16,799,900 CLP
Logistics Clerk Factory and Manufacturing 7,441,400 CLP
Machine Operator Factory and Manufacturing 6,382,300 CLP
Machinist Factory and Manufacturing 6,382,300 CLP
Maintenance Manager Factory and Manufacturing 23,040,200 CLP
Maintenance Store Clerk Factory and Manufacturing 6,624,300 CLP
Manufacturing Engineer Factory and Manufacturing 19,321,100 CLP
Manufacturing Engineering Manager Factory and Manufacturing 29,041,200 CLP
Manufacturing Engineering Technologist Factory and Manufacturing 22,918,100 CLP
Manufacturing Manager Factory and Manufacturing 35,279,300 CLP
Manufacturing Operative Factory and Manufacturing 10,537,900 CLP
Manufacturing Production Technician Factory and Manufacturing 7,669,900 CLP
Manufacturing Supervisor Factory and Manufacturing 17,399,400 CLP
Manufacturing Technician Factory and Manufacturing 7,404,700 CLP
Materials Manager Factory and Manufacturing 26,639,300 CLP
Materials Supervisor Factory and Manufacturing 17,159,700 CLP
Mechanical Fitter Engineer Factory and Manufacturing 20,639,100 CLP
Mechanical Foreman Factory and Manufacturing 6,514,800 CLP
Merchandise Planner Factory and Manufacturing 10,523,700 CLP
Metrology Engineer Factory and Manufacturing 19,678,200 CLP
Operations Engineer Factory and Manufacturing 19,921,600 CLP
Operations Manager Factory and Manufacturing 31,800,300 CLP
Order Management Coordinator Factory and Manufacturing 15,960,700 CLP
Order Processing Manager Factory and Manufacturing 27,361,200 CLP
Order Selector Factory and Manufacturing 7,618,900 CLP
Package Handler Factory and Manufacturing 5,880,300 CLP
Packaging Manager Factory and Manufacturing 21,841,900 CLP
Packer Factory and Manufacturing 6,480,800 CLP
Packing Deputy Supervisor Factory and Manufacturing 16,439,200 CLP
Planning Manager Factory and Manufacturing 28,801,400 CLP
Plant Manager Factory and Manufacturing 33,001,000 CLP
Precision Instrument Repairer Factory and Manufacturing 9,504,500 CLP
Process Technician Factory and Manufacturing 7,561,700 CLP
Product Manager Factory and Manufacturing 32,639,300 CLP
Production Analyst Factory and Manufacturing 26,759,500 CLP
Production Director Factory and Manufacturing 39,840,400 CLP
Production Engineer Factory and Manufacturing 20,760,500 CLP
Production Engineering Supervisor Factory and Manufacturing 31,678,800 CLP
Production Inspector Factory and Manufacturing 20,760,500 CLP
Production Laborer Factory and Manufacturing 5,686,100 CLP
Production Manager Factory and Manufacturing 36,601,600 CLP
Production Operator Factory and Manufacturing 9,025,900 CLP
Production Scheduler Factory and Manufacturing 15,719,900 CLP
Production Supervisor Factory and Manufacturing 20,518,900 CLP
Production Technician Factory and Manufacturing 8,401,800 CLP
Production Worker Factory and Manufacturing 8,329,200 CLP
Quality Control Analyst Factory and Manufacturing 27,118,300 CLP
Quality Control Inspector Factory and Manufacturing 21,599,000 CLP
Quality Control Manager Factory and Manufacturing 28,560,900 CLP
Service Technician Factory and Manufacturing 7,523,300 CLP
SHEQ Officer Factory and Manufacturing 9,816,600 CLP
Shipping Manager Factory and Manufacturing 30,841,400 CLP
Small Engine Mechanic Factory and Manufacturing 10,956,400 CLP
Spray Painter Factory and Manufacturing 6,118,800 CLP
Sterile Processing Technician Factory and Manufacturing 7,246,500 CLP
Structural Welder Factory and Manufacturing 5,518,700 CLP
Supply Chain Operative Factory and Manufacturing 18,239,400 CLP
Technical Operator Factory and Manufacturing 8,758,900 CLP
Technology Development Manager Factory and Manufacturing 35,878,200 CLP
Testing Technician Factory and Manufacturing 13,919,600 CLP
Toolmaker Factory and Manufacturing 10,546,700 CLP
Warehouse Forklift Operator Factory and Manufacturing 6,263,400 CLP
Warehouse Operative Factory and Manufacturing 6,768,400 CLP
Warehouse Worker Factory and Manufacturing 7,057,300 CLP
Warranty Handler Factory and Manufacturing 11,221,100 CLP
Welder Factory and Manufacturing 6,168,300 CLP
Workshop Manager Factory and Manufacturing 23,159,200 CLP

Salary Comparison by City

If you want to compare salaries with different cities in Chile, you can use the links below to explore the data for each specific city we have researched.

City Average Salary
Antofagasta 15,001,200 CLP
Concepcion 12,481,200 CLP
La Florida 14,280,500 CLP
Las Condes 13,561,900 CLP
Maipu 15,599,800 CLP
Penalolen 13,319,300 CLP
Puente Alto 15,480,300 CLP
Rancagua 12,239,700 CLP
San Bernardo 13,561,900 CLP
Santiago 15,118,700 CLP
Temuco 12,841,200 CLP
Valparaiso 13,561,900 CLP
Vina del Mar 15,118,700 CLP

Link To or Reference This Page

We spend a lot of time collecting, cleaning, merging, and formatting the data that is shown on the site to be as useful to you as possible.

If you found the data or information on this page useful in your research, please use the tool below to properly cite or reference World Salaries as the source. We appreciate your support!

  • "Average CNC Machinist Salary in Chile for 2024". World Salaries. Accessed on March 28, 2024. https://worldsalaries.com/average-cnc-machinist-salary-in-chile/.

  • "Average CNC Machinist Salary in Chile for 2024". World Salaries, https://worldsalaries.com/average-cnc-machinist-salary-in-chile/. Accessed 28 March, 2024

  • Average CNC Machinist Salary in Chile for 2024. World Salaries. Retrieved from https://worldsalaries.com/average-cnc-machinist-salary-in-chile/.